Toyota Corona Mark II 1800 STD is an automobile that has a 4 door saloon (sedan) body style with a front located engine driving through the rear wheels.
The Toyota Corona Mark II 1800 STD is one of the TX60 model family from Toyota.
Its 1.8 litre engine is a naturally aspirated, overhead valve, 4 cylinder unit that develops 94 bhp (95 PS/70 kW) of power at 5400 rpm, and maximum torque of 147 N·m (108 lb·ft/15 kgm) at 3400 rpm.
The engine drives the wheels compliments of a 4 speed manual transmission.
Its quoted weight at the kerb is 1055 kg.
Full specs
|
|
Applicable to the Japanese (JDM) domestic market(s). | ||
| bodywork | |||
|---|---|---|---|
| Body type | 4/5 seater sedan/saloon | ||
| Number of doors | 4 | ||
| Designer | |||
| dimensions & weights | |||
| Wheelbase | 2645 mm | 104.1 inches | |
| Track/tread (front) | 1375 mm | 54.1 inches | |
| Track/tread (rear) | 1370 mm | 53.9 inches | |
| Length | 4480 mm | 176.4 inches | |
| Width | 1670 mm | 65.7 inches | |
| Height | 1425 mm | 56.1 inches | |
| Ground clearance | 175 mm | 6.9 inches | |
| length:wheelbase ratio | 1.69 | ||
| Kerb weight | 1055 kg | 2326 lb | |
| Weight distribution | |||
| fuel tank capacity | 65 litres | 14.3 [17.2] UK [US] gal. | |
| aerodynamics | |||
| Drag coefficient | |||
| Frontal area | |||
| CdA | |||
| Powertrain | |||
| engine type | naturally aspirated petrol | ||
| Engine manufacturer | Toyota | ||
| Engine code | 13T-U | ||
| Cylinders | Straight 4 | ||
| Capacity | 1.8 litre 1770 cc (108.012 cu in) |
||
| Bore × Stroke | 85 × 78 mm
3.35 × 3.07 in |
||
| Bore/stroke ratio | 1.09 | ||
| Valve gear | overhead valve (OHV)
2 valves per cylinder 8 valves in total |
||
| maximum power output (JIS net) |
95 PS (94 bhp) (70 kW) at 5400 rpm |
||
| maximum torque (JIS net) |
147 Nm (108 ft·lb) (15 kgm) at 3400 rpm |
||
| Specific output (JIS net) |
39.6 kW/litre 53.8 ps/litre 53.1 bhp/litre 0.87 bhp/cu in |
||
| Specific torque (JIS net) |
83.05 Nm/litre
1 ft·lb/cu3 |
||
| Engine construction | |||
| Lubrication | wet sumped | ||
| compression ratio | 8.6:1 | ||
| Fuel system | |||
| bmep (brake mean effective pressure) | 1043.6 kPa (151.4 psi) | ||
| Maximum RPM | |||
| crankshaft bearings | |||
| Engine coolant | Water | ||
| Unitary capacity | 442.5 cc | ||
| Aspiration | Normal | ||
| Compressor | N/A | ||
| Intercooler | None | ||
| Catalytic converter | Y | ||
| performance | |||
| Acceleration 0-80km/h (50mph) | |||
| Acceleration 0-60mph | |||
| Acceleration 0-100km/h | |||
| Acceleration 0-160km/h (100mph) | |||
| Standing quarter-mile | |||
| Standing kilometre | |||
| Maximum speed | |||
| Power-to-weight ratio | Higher is better 90.34 PS/tonne (1000 kg) 0.09 PS/kg 66.44 kW/tonne (1000 kg) 0.07 kW/kg 89.1 bhp/tonne (1000 kg) 0.09 bhp/kg 0.04 bhp/lb |
||
| Weight-to-power ratio | Lower is better 15.05 kg/kW 25.14 lb/bhp |
||
| fuel consumption | |||
| Fuel consumption | |||
| universal fuel consumption (calculated from the above) | |||
| litres/100km | |||
| km/litre | |||
| UK MPG | |||
| US MPG | |||
| Carbon dioxide emissions | |||
| Carfolio Calculated CO2 ? | |||
| VED band (UK) | |||
| CO2 Effizienz (DE) | |||
| chassis | |||
| Engine position | front | ||
| Engine layout | longitudinal | ||
| Drive wheels | rear wheel drive | ||
| Torque split | N/A | ||
| Steering | |||
| turns lock-to-lock | |||
| Turning circle | |||
| Front suspension | |||
| Rear suspension | |||
| Wheel size front | |||
| Wheel size rear | |||
| Tyres front | 6.45-14-4 | ||
| Tyres rear | 6.45-14-4 | ||
| Brakes F/R | |||
| Front brake diameter | |||
| Rear brake diameter | |||
| Braked area | |||
| Gearbox | 4 speed manual | ||
| Top gear ratio | 1 | ||
| Final drive ratio | 3.91 | ||
| general | |||
| Carfolio.com ID | 496815 | ||
| Production total | |||
| Model code | E-TX60-XEKRS | ||
| Model family | TX60 | ||
| RAC rating | 17.9 | ||
| Insurance classification | No information available | ||
| Tax band | No information available | ||
|
1980 Toyota Corona Mark II 1800 STD added 2016-08-15. Last modified 2020-03-16. |
|||