The 190 2.3 E is a road car from Mercedes-Benz, with rear wheel drive, a front located engine and a Bruno Sacco-designed 4 door saloon (sedan) body style.
The 190 2.3 E forms part of Mercedes-Benz's W 201 model series.
It's powered courtesy of a naturally aspirated engine of 2.3 litre capacity. This powerplant features single overhead camshaft valve gear, 4 cylinder layout, and 2 valves per cylinder. It produces 132 bhp (134 PS/98 kW) of power at 5100 rpm, and maximum torque of 198 N·m (146 lb·ft/20.2 kgm) at 3500 rpm.
The engine transfers its power through to the wheels by means of a 5 speed manual transmission.
Stated kerb weight is 1220 kg.
Full specs
|
|
|||
| Carrocería | |||
|---|---|---|---|
| Carrocería | 4/5 seater sedan/saloon | ||
| Número de puertas | 4 | ||
| diseñado por | Bruno Sacco | ||
| Dimensiones y pesos | |||
| Distancia entre ejes | 2665 | 104.9 | |
| Vía delantera | 1437 | 56.6 | |
| Vía trasera | 1418 | 55.8 | |
| Longitud | 4448 | 175.1 | |
| Ancho | 1691 | 66.6 | |
| Altura | 1390 | 54.7 | |
| Despeje del suelo | |||
| Relación Largo:Dist.entre ejes | 1.67 | ||
| Peso en vacío | 1220 kg | 2690 | |
| Distribución del peso (% adelante) | |||
| Capacità serbatoio | 55 litres | 12.1 [14.5] UK [US] gal. | |
| Aerodinámica | |||
| Coeficiente de penetración | |||
| Superficie frontal | |||
| SCx | |||
| Tren motriz | |||
| naturally aspirated petrol | |||
| Fabricante del motor | Mercedes-Benz/Cosworth | ||
| Código de motor | |||
| Número de cilindros | Straight 4 | ||
| Cilindrada | 2.3 litre 2299 cc (140.294 cu in) |
||
| Diámetro × Carrera | 95.5 × 80.25 mm
3.76 × 3.16 in |
||
| Relación diámetro/carrera | 1.19 | ||
| Distribución | single overhead camshaft (SOHC)
2 válvulas por cilindro 8 Total de válvulas |
||
| Potencia nominal (DIN) |
134 PS (132 bhp) (98 kW) a 5100 rpm |
||
| Par motor máximo (DIN) |
198 Nm (146 ft·lb) (20.2 kgm) a 3500 rpm |
||
| Potencia específica (DIN) |
42.8 kW/litre 58.2 ps/litre 57.4 bhp/litre 0.94 bhp/cu in |
||
(DIN) |
86.12 Nm/litre
1.04 ft·lb/cu3 |
||
| Materiales de block / culata | |||
| Lubricación | |||
| Relación de compresión | 9:1 | ||
| Alimentación | Bo KE-Jetronic fuel inj. | ||
| 1082.3 kPa (157 psi) | |||
| Maximum RPM | |||
| Casquillos de cigüeñal | 5 | ||
| Engine coolant | Water | ||
| 574.75 cc | |||
| Aspiración | Normal | ||
| Compresor | N/A | ||
| intercooler | None | ||
| catalizador | Y | ||
| Rendimiento | |||
| 0-80km/h | |||
| 0-60mph | |||
| 0-100km/h | |||
| 0-160km/h | |||
| 0-400m | |||
| 0-1000m | |||
| Velocidad máxima | |||
| Power-to-weight ratio | Higher is better 109.7 PS/tonne (1000 kg) 0.11 PS/kg 80.68 kW/tonne (1000 kg) 0.08 kW/kg 108.2 bhp/tonne (1000 kg) 0.11 bhp/kg 0.05 bhp/lb |
||
| Weight-to-power ratio | Lower is better 12.39 kg/kW 20.7 lb/bhp |
||
| Consumos | |||
| Consumo de combustible | |||
| universal fuel consumption (calculated from the above) | |||
| litres/100km | |||
| km/litre | |||
| UK MPG | |||
| US MPG | |||
| Emisiones de CO2 | |||
| Carfolio Calculated CO2 ? | |||
| VED band (UK) | |||
| CO2 Effizienz (DE) | |||
| Chasis | |||
| Ubicación del motor | front | ||
| Engine layout | longitudinal | ||
| Tracción | rear wheel drive | ||
| Alimentación | N/A | ||
| Dirección, tipo | |||
| turns lock-to-lock | |||
| Turning circle | |||
| Suspensión delantera | I.MS.W.CS.ARB. | ||
| Suspensión trasera | I.MLi.CS.ARB. | ||
| Ruedas delante | |||
| Ruedas detrás | |||
| Neumáticos delante | |||
| Neumáticos detrás | |||
| Brakes F/R | VeDi/Di-S-ABS | ||
| Front brake diameter | |||
| Rear brake diameter | |||
| Braked area | |||
| Transmisión | 5 speed manual | ||
| Eje trasero desmultiplicación | 0.81 | ||
| Desmultiplicación grupo cónico | 3.46 | ||
| General | |||
| Carfolio.com ID | 31504 | ||
| Unidades producidas | |||
| Model code | |||
| W 201 | |||
| RAC rating | 22.6 | ||
| Insurance classification | No information available | ||
| Tax band | No information available | ||
|
1992 Mercedes-Benz 190 2.3 E added 1996-11-17. Last modified 2013-06-19. |
|||
