This automobile has a 2 door light delivery vehicle/ute/bakkie type body with a front mounted engine powering the rear wheels.
The Holden Ute SV6 is one of the VF II range of cars from Holden.
The power is produced by a naturally aspirated engine of 3.6 litre capacity. This unit features double overhead camshaft valve gear, a 60 degree V 6 cylinder layout, and 4 valves per cylinder. It develops 281 bhp (285 PS/210 kW) of power at 6700 rpm, and maximum torque of 350 N·m (258 lb·ft/35.7 kgm) at 2800 rpm.
The engine delivers its power through to the wheels via a 6 speed manual gearbox.
Stated kerb weight is 1680 kg.
Full specs
|
|
|||
| Carrocería | |||
|---|---|---|---|
| Carrocería | 2 seater light delivery vehicle/ute/bakkie | ||
| Número de puertas | 2 | ||
| diseñado por | |||
| Dimensiones y pesos | |||
| Distancia entre ejes | 3009 | 118.5 | |
| Vía delantera | 1592 | 62.7 | |
| Vía trasera | 1606 | 63.2 | |
| Longitud | 5062 | 199.3 | |
| Ancho | 1898 | 74.7 | |
| Altura | 1494 | 58.8 | |
| Despeje del suelo | |||
| Relación Largo:Dist.entre ejes | 1.68 | ||
| Peso en vacío | 1680 kg | 3704 | |
| Distribución del peso (% adelante) | |||
| Capacità serbatoio | 71 litres | 15.6 [18.8] UK [US] gal. | |
| Aerodinámica | |||
| Coeficiente de penetración | |||
| Superficie frontal | |||
| SCx | |||
| Tren motriz | |||
| naturally aspirated petrol | |||
| Fabricante del motor | GM | ||
| Código de motor | |||
| Número de cilindros | V 6 in 60° vee | ||
| Cilindrada | 3.6 litre 3564 cc (217.489 cu in) |
||
| Diámetro × Carrera | 94 × 85.6 mm
3.7 × 3.37 in |
||
| Relación diámetro/carrera | 1.1 | ||
| Distribución | double overhead camshaft (DOHC)
4 válvulas por cilindro 24 Total de válvulas |
||
| Potencia nominal (ECE) |
285 PS (281 bhp) (210 kW) a 6700 rpm |
||
| Par motor máximo (ECE) |
350 Nm (258 ft·lb) (35.7 kgm) a 2800 rpm |
||
| Potencia específica (ECE) |
58.8 kW/litre 79.9 ps/litre 78.8 bhp/litre 1.29 bhp/cu in |
||
(ECE) |
98.2 Nm/litre
1.19 ft·lb/cu3 |
||
| Materiales de block / culata | |||
| Lubricación | Cárter húmedo | ||
| Relación de compresión | 11.5:1 | ||
| Alimentación | direct petrol injection | ||
| 1234.1 kPa (179 psi) | |||
| Maximum RPM | |||
| Casquillos de cigüeñal | |||
| Engine coolant | Water | ||
| 594 cc | |||
| Aspiración | Normal | ||
| Compresor | N/A | ||
| intercooler | None | ||
| catalizador | Y | ||
| Rendimiento | |||
| 0-80km/h | |||
| 0-60mph | |||
| 0-100km/h | |||
| 0-160km/h | |||
| 0-400m | |||
| 0-1000m | |||
| Velocidad máxima | |||
| Power-to-weight ratio | Higher is better 169.59 PS/tonne (1000 kg) 0.17 PS/kg 124.73 kW/tonne (1000 kg) 0.12 kW/kg 167.26 bhp/tonne (1000 kg) 0.17 bhp/kg 0.07 bhp/lb |
||
| Weight-to-power ratio | Lower is better 8.02 kg/kW 13.39 lb/bhp |
||
| Consumos | |||
| Consumo de combustible | |||
| universal fuel consumption (calculated from the above) | |||
| litres/100km | |||
| km/litre | |||
| UK MPG | |||
| US MPG | |||
| Emisiones de CO2 | 215.0 g/km NEDC | ||
| Carfolio Calculated CO2 ? | |||
| VED band (UK) | K | ||
| CO2 Effizienz (DE) | F | ||
| Chasis | |||
| Ubicación del motor | front | ||
| Engine layout | longitudinal | ||
| Tracción | rear wheel drive | ||
| Alimentación | N/A | ||
| Dirección, tipo | |||
| turns lock-to-lock | |||
| Turning circle | |||
| Suspensión delantera | |||
| Suspensión trasera | |||
| Ruedas delante | 8 x 18 | ||
| Ruedas detrás | 8 x 18 | ||
| Neumáticos delante | 245/45 R 18 | ||
| Neumáticos detrás | 245/45 R 18 | ||
| Brakes F/R | VeDi/VeDi-S-ABS | ||
| Front brake diameter | 298 mm | ||
| Rear brake diameter | 302 mm | ||
| Braked area | |||
| Transmisión | 6 speed manual | ||
| Eje trasero desmultiplicación | 0.63 | ||
| Desmultiplicación grupo cónico | 3.27 | ||
| General | |||
| Carfolio.com ID | 567534 | ||
| Unidades producidas | |||
| Model code | |||
| VF II | |||
| RAC rating | 32.9 | ||
| Insurance classification | No information available | ||
| Tax band | No information available | ||
|
2016 Holden Ute SV6 added 2018-11-17. Last modified 2020-03-16. |
|||
