The Holden Kingswood is a rear wheel drive automobile, with the engine placed in the front, and a 4 door saloon (sedan) body.
It forms part of Holden's HG model range.
The Holden Kingswood's engine is a naturally aspirated petrol, 2.6 litre, overhead valve 6 cylinder with 2 valves per cylinder. This unit develops 114 bhp (116 PS/85 kW) of power at 4400 rpm, and maximum torque of 213 N·m (157 lb·ft/21.7 kgm) at 2000 rpm.
The engine delivers its power through to the wheels via a 3 speed manual transmission.
The Holden Kingswood weighs a claimed 1286 kg at the kerb.
Full specs
|
|
|||
| Carrocería | |||
|---|---|---|---|
| Carrocería | 4/5 seater sedan/saloon | ||
| Número de puertas | 4 | ||
| diseñado por | |||
| Dimensiones y pesos | |||
| Distancia entre ejes | 2819 | 111 | |
| Vía delantera | 1476 | 58.1 | |
| Vía trasera | 1476 | 58.1 | |
| Longitud | 4694 | 184.8 | |
| Ancho | 1824 | 71.8 | |
| Altura | 1412 | 55.6 | |
| Despeje del suelo | 185 | 7.3 | |
| Relación Largo:Dist.entre ejes | 1.67 | ||
| Peso en vacío | 1286 kg | 2835 | |
| Distribución del peso (% adelante) | |||
| Capacità serbatoio | 75 litres | 16.5 [19.8] UK [US] gal. | |
| Aerodinámica | |||
| Coeficiente de penetración | |||
| Superficie frontal | |||
| SCx | |||
| Tren motriz | |||
| naturally aspirated petrol | |||
| Fabricante del motor | GM | ||
| Código de motor | GMH 161 HC | ||
| Número de cilindros | Straight 6 | ||
| Cilindrada | 2.6 litre 2637 cc (160.92 cu in) |
||
| Diámetro × Carrera | 85.7 × 76.2 mm
3.37 × 3 in |
||
| Relación diámetro/carrera | 1.12 | ||
| Distribución | overhead valve (OHV)
2 válvulas por cilindro 12 Total de válvulas |
||
| Potencia nominal (SAE) |
116 PS (114 bhp) (85 kW) a 4400 rpm |
||
| Par motor máximo (SAE) |
213 Nm (157 ft·lb) (21.7 kgm) a 2000 rpm |
||
| Potencia específica (SAE) |
32.2 kW/litre 43.8 ps/litre 43.2 bhp/litre 0.71 bhp/cu in |
||
(SAE) |
80.77 Nm/litre
0.98 ft·lb/cu3 |
||
| Materiales de block / culata | |||
| Lubricación | Cárter húmedo | ||
| Relación de compresión | 9.2:1 | ||
| Alimentación | 1 Bendix-Stromberg carburettor | ||
| 1015 kPa (147.2 psi) | |||
| Maximum RPM | |||
| Casquillos de cigüeñal | 7 | ||
| Engine coolant | Water | ||
| 439.5 cc | |||
| Aspiración | Normal | ||
| Compresor | N/A | ||
| intercooler | None | ||
| catalizador | N | ||
| Rendimiento | |||
| 0-80km/h | |||
| 0-60mph | |||
| 0-100km/h | |||
| 0-160km/h | |||
| 0-400m | |||
| 0-1000m | |||
| Velocidad máxima | |||
| Power-to-weight ratio | Higher is better 89.88 PS/tonne (1000 kg) 0.09 PS/kg 66.1 kW/tonne (1000 kg) 0.07 kW/kg 88.65 bhp/tonne (1000 kg) 0.09 bhp/kg 0.04 bhp/lb |
||
| Weight-to-power ratio | Lower is better 15.13 kg/kW 25.27 lb/bhp |
||
| Consumos | |||
| Consumo de combustible | |||
| universal fuel consumption (calculated from the above) | |||
| litres/100km | |||
| km/litre | |||
| UK MPG | |||
| US MPG | |||
| Emisiones de CO2 | |||
| Carfolio Calculated CO2 ? | |||
| VED band (UK) | |||
| CO2 Effizienz (DE) | |||
| Chasis | |||
| Ubicación del motor | front | ||
| Engine layout | longitudinal | ||
| Tracción | rear wheel drive | ||
| Alimentación | N/A | ||
| Dirección, tipo | |||
| turns lock-to-lock | |||
| Turning circle | |||
| Suspensión delantera | |||
| Suspensión trasera | |||
| Ruedas delante | 5.0JJ x 14 | ||
| Ruedas detrás | 5.0JJ x 14 | ||
| Neumáticos delante | 6.95 x 14 | ||
| Neumáticos detrás | 6.95 x 14 | ||
| Brakes F/R | |||
| Front brake diameter | |||
| Rear brake diameter | |||
| Braked area | |||
| Transmisión | 3 speed manual | ||
| Eje trasero desmultiplicación | 1 | ||
| Desmultiplicación grupo cónico | 3.55 | ||
| General | |||
| Carfolio.com ID | 615406 | ||
| Unidades producidas | |||
| Model code | |||
| HG | |||
| RAC rating | 27.3 | ||
| Insurance classification | No information available | ||
| Tax band | No information available | ||
|
1970 Holden Kingswood added 2019-10-26. Last modified 2020-03-16. |
|||