The Holden Kingswood is a rear wheel drive automobile, with the engine placed in the front, and a 4 door saloon (sedan) body.
It forms part of Holden's HG model range.
The Holden Kingswood's engine is a naturally aspirated petrol, 2.6 litre, overhead valve 6 cylinder with 2 valves per cylinder. This unit develops 114 bhp (116 PS/85 kW) of power at 4400 rpm, and maximum torque of 213 N·m (157 lb·ft/21.7 kgm) at 2000 rpm.
The engine delivers its power through to the wheels via a 3 speed manual transmission.
The Holden Kingswood weighs a claimed 1286 kg at the kerb.
Full specs
|
|
|||
| bodywork | |||
|---|---|---|---|
| Body type | 4/5 seater sedan/saloon | ||
| Number of doors | 4 | ||
| Designer | |||
| dimensions & weights | |||
| Wheelbase | 2819 mm | 111 inches | |
| Track/tread (front) | 1476 mm | 58.1 inches | |
| Track/tread (rear) | 1476 mm | 58.1 inches | |
| Length | 4694 mm | 184.8 inches | |
| Width | 1824 mm | 71.8 inches | |
| Height | 1412 mm | 55.6 inches | |
| Ground clearance | 185 mm | 7.3 inches | |
| length:wheelbase ratio | 1.67 | ||
| Kerb weight | 1286 kg | 2835 lb | |
| Weight distribution | |||
| fuel tank capacity | 75 litres | 16.5 [19.8] UK [US] gal. | |
| aerodynamics | |||
| Drag coefficient | |||
| Frontal area | |||
| CdA | |||
| Powertrain | |||
| engine type | naturally aspirated petrol | ||
| Engine manufacturer | GM | ||
| Engine code | GMH 161 HC | ||
| Cylinders | Straight 6 | ||
| Capacity | 2.6 litre 2637 cc (160.92 cu in) |
||
| Bore × Stroke | 85.7 × 76.2 mm
3.37 × 3 in |
||
| Bore/stroke ratio | 1.12 | ||
| Valve gear | overhead valve (OHV)
2 valves per cylinder 12 valves in total |
||
| maximum power output (SAE) |
116 PS (114 bhp) (85 kW) at 4400 rpm |
||
| maximum torque (SAE) |
213 Nm (157 ft·lb) (21.7 kgm) at 2000 rpm |
||
| Specific output (SAE) |
32.2 kW/litre 43.8 ps/litre 43.2 bhp/litre 0.71 bhp/cu in |
||
| Specific torque (SAE) |
80.77 Nm/litre
0.98 ft·lb/cu3 |
||
| Engine construction | |||
| Lubrication | wet sumped | ||
| compression ratio | 9.2:1 | ||
| Fuel system | 1 Bendix-Stromberg carburettor | ||
| bmep (brake mean effective pressure) | 1015 kPa (147.2 psi) | ||
| Maximum RPM | |||
| crankshaft bearings | 7 | ||
| Engine coolant | Water | ||
| Unitary capacity | 439.5 cc | ||
| Aspiration | Normal | ||
| Compressor | N/A | ||
| Intercooler | None | ||
| Catalytic converter | N | ||
| performance | |||
| Acceleration 0-80km/h (50mph) | |||
| Acceleration 0-60mph | |||
| Acceleration 0-100km/h | |||
| Acceleration 0-160km/h (100mph) | |||
| Standing quarter-mile | |||
| Standing kilometre | |||
| Maximum speed | |||
| Power-to-weight ratio | Higher is better 89.88 PS/tonne (1000 kg) 0.09 PS/kg 66.1 kW/tonne (1000 kg) 0.07 kW/kg 88.65 bhp/tonne (1000 kg) 0.09 bhp/kg 0.04 bhp/lb |
||
| Weight-to-power ratio | Lower is better 15.13 kg/kW 25.27 lb/bhp |
||
| fuel consumption | |||
| Fuel consumption | |||
| universal fuel consumption (calculated from the above) | |||
| litres/100km | |||
| km/litre | |||
| UK MPG | |||
| US MPG | |||
| Carbon dioxide emissions | |||
| Carfolio Calculated CO2 ? | |||
| VED band (UK) | |||
| CO2 Effizienz (DE) | |||
| chassis | |||
| Engine position | front | ||
| Engine layout | longitudinal | ||
| Drive wheels | rear wheel drive | ||
| Torque split | N/A | ||
| Steering | |||
| turns lock-to-lock | |||
| Turning circle | |||
| Front suspension | |||
| Rear suspension | |||
| Wheel size front | 5.0JJ x 14 | ||
| Wheel size rear | 5.0JJ x 14 | ||
| Tyres front | 6.95 x 14 | ||
| Tyres rear | 6.95 x 14 | ||
| Brakes F/R | |||
| Front brake diameter | |||
| Rear brake diameter | |||
| Braked area | |||
| Gearbox | 3 speed manual | ||
| Top gear ratio | 1 | ||
| Final drive ratio | 3.55 | ||
| general | |||
| Carfolio.com ID | 615406 | ||
| Production total | |||
| Model code | |||
| Model family | HG | ||
| RAC rating | 27.3 | ||
| Insurance classification | No information available | ||
| Tax band | No information available | ||
|
1970 Holden Kingswood added 2019-10-26. Last modified 2020-03-16. |
|||