The Lancia Flaminia Coupé 3 B 2500 is a 2 door coupé-bodied car designed by Pininfarina with a front located engine supplying power to the rear wheels.
The Lancia Flaminia Coupé 3 B 2500 is one of the 823.02 model family from Lancia.
Its engine is a naturally aspirated petrol, 2.5 litre, overhead valve 60 degree V 6 cylinder with 2 valves per cylinder. This powerplant has an output of 126 bhp (128 PS/94 kW) of power at 5600 rpm, and maximum torque of 183 N·m (135 lb·ft/18.7 kgm) at 3500 rpm.
A 4 speed manual transmission supplies the power to the wheels.
The Lancia Flaminia Coupé 3 B 2500 weighs a claimed 1520 kg at the kerb.
Top stated speed is 177 km/h, which equates to 110 mph.
Full specs
|
|
|||
| Carrosserie | |||
|---|---|---|---|
| Carrosserie | 2+2 seater fixed-head coupé | ||
| Aantal portieren | 2 | ||
| Ontwerper | Pininfarina | ||
| Afmetingen en gewicht | |||
| Wielbasis | 2750 | 108.3 | |
| Spoorbreedte voor | 1368 | 53.9 | |
| Spoorbreedte achter | 1370 | 53.9 | |
| Lengte | 4686 | 184.5 | |
| Breedte | 1740 | 68.5 | |
| Hoogte | 1420 | 55.9 | |
| Bodemvrijheid | |||
| 1.7 | |||
| Gewicht | 1520 kg | 3351 | |
| Gewichtsverdeling | |||
| Benzinetank inhalt | 58 litres | 12.8 [15.3] UK [US] gal. | |
| Aërodynamica | |||
| Cw-waarde | |||
| Frontaal oppervlak | |||
| CdA | |||
| naturally aspirated petrol | |||
| Motor fabrikant | Lancia | ||
| Motor nummer | 823.00 | ||
| Aantal cilinders | V 6 in 60° vee | ||
| Cilinderinhoud | 2.5 litre 2458 cc (149.996 cu in) |
||
| Boring × Slag | 80 × 81.5 mm
3.15 × 3.21 in |
||
| Boring/slag verhouding | 0.98 | ||
| Distributie | overhead valve (OHV)
2 Kleppen per cilinder 12 Totaal aantal kleppen |
||
| Vermogen (CUNA) |
128 PS (126 bhp) (94 kW) bij 5600 t/min |
||
| Max. koppel (CUNA) |
183 Nm (135 ft·lb) (18.7 kgm) bij 3500 t/min |
||
| Specific output (CUNA) |
38.2 kW/litre 52 ps/litre 51.3 bhp/litre 0.84 bhp/cu in |
||
(CUNA) |
74.45 Nm/litre
0.9 ft·lb/cu3 |
||
| Motor constructie | |||
| Smering | Nat carter | ||
| Compressieverhouding | 9:1 | ||
| Brandstofsysteem | 1 Solex C 35 P 3-I carburettor | ||
| 935.6 kPa (135.7 psi) | |||
| Maximum tpm | |||
| Aantal nokkenas lagers | |||
| Afkoeling | Water | ||
| Eenheidscylinderinhoud | 409.67 cc | ||
| Aanzuiging | Normal | ||
| Compressor | N/A | ||
| Intercooler | None | ||
| Katalysator | N | ||
| Prestasies | |||
| 0-80km/h | |||
| 0-60mph | |||
| 0-100km/h | |||
| 0-160km/h | |||
| 0-400m | |||
| 0-1000m | |||
| Max. snelheid | 177 km/h (110 mph) | ||
| Power-to-weight ratio | Higher is better 84.05 PS/tonne (1000 kg) 0.08 PS/kg 61.81 kW/tonne (1000 kg) 0.06 kW/kg 82.89 bhp/tonne (1000 kg) 0.08 bhp/kg 0.04 bhp/lb |
||
| Weight-to-power ratio | Lower is better 16.18 kg/kW 27.02 lb/bhp |
||
| Verbruik | |||
| Benzineverbruik | |||
| universal fuel consumption (calculated from the above) | |||
| litres/100km | |||
| km/litre | |||
| UK MPG | |||
| US MPG | |||
| CO2 Emissies | |||
| Carfolio Calculated CO2 ? | |||
| VED band (UK) | |||
| CO2 Effizienz (DE) | |||
| Onderstel | |||
| Motor plaatsing | front | ||
| Motor plaatsing | longitudinal | ||
| Aandrijving | rear wheel drive | ||
| Koppelverdeling | N/A | ||
| Stuurinrichting | |||
| Aantal omwentelingen stuurwiel | |||
| Draaicirkel | |||
| Wielophanging voor | I.CS.W. | ||
| Wielophanging achter | dD.SE. | ||
| Velgmaat voor | |||
| Velgmaat achter | |||
| Bandenmaat voor | Michelin X 175 x 400 | ||
| Bandenmaat agter | Michelin X 175 x 400 | ||
| Bremmen voor/agter | Di/Di | ||
| Rem diameter voor | 292 mm | ||
| Rem diameter agter | 305 mm | ||
| Braked area | |||
| Versnellingsbak | 4 speed manual | ||
| Hoogste versnelling verhouding | 1 | ||
| Achteras verhouding | 3.92 | ||
| Algemeen | |||
| Carfolio.com ID | 64273 | ||
| Totaal gebouwd | |||
| Bouwserie | |||
| Model familie | 823.02 | ||
| RAC rating | 23.8 | ||
| Insurance classification | No information available | ||
| Tax band | No information available | ||
|
1963 Lancia Flaminia Coupé 3 B 2500 added before December 1995. Last modified 2022-05-03. |
|||
