The Appia Series III Standard is a rear wheel drive saloon (sedan) motor vehicle with a front mounted engine, sold by Lancia.
Power is produced by an overhead valve, 1.1 litre naturally aspirated 4 cylinder motor, with 2 valves per cylinder that produces power and torque figures of 47 bhp (47.7 PS/35 kW) at 5000 rpm and 85 N·m (63 lb·ft/8.7 kgm) at 3000 rpm respectively.
Power is transmitted to the wheels by means of a 4 speed manual transmission.
It weighs a claimed 920 kg at the kerb.
Top quoted speed is 132 km/h (82 mph).
Full specs
|
|
|||
| Carrocería | |||
|---|---|---|---|
| Carrocería | 4/5 seater sedan/saloon | ||
| Número de puertas | 4 | ||
| diseñado por | |||
| Dimensiones y pesos | |||
| Distancia entre ejes | 2510 | 98.8 | |
| Vía delantera | 1178 | 46.4 | |
| Vía trasera | 1182 | 46.5 | |
| Longitud | 4020 | 158.3 | |
| Ancho | 1480 | 58.3 | |
| Altura | 1450 | 57.1 | |
| Despeje del suelo | 105 | 4.1 | |
| Relación Largo:Dist.entre ejes | 1.6 | ||
| Peso en vacío | 920 kg | 2028 | |
| Distribución del peso (% adelante) | |||
| Capacità serbatoio | 38 litres | 8.4 [10] UK [US] gal. | |
| Aerodinámica | |||
| Coeficiente de penetración | |||
| Superficie frontal | |||
| SCx | |||
| Tren motriz | |||
| naturally aspirated petrol | |||
| Fabricante del motor | Lancia | ||
| Código de motor | |||
| Número de cilindros | V 4 | ||
| Cilindrada | 1.1 litre 1091 cc (66.577 cu in) |
||
| Diámetro × Carrera | 68 × 75 mm
2.68 × 2.95 in |
||
| Relación diámetro/carrera | 0.91 | ||
| Distribución | overhead valve (OHV)
2 válvulas por cilindro 8 Total de válvulas |
||
| Potencia nominal (Net) |
47.7 PS (47 bhp) (35 kW) a 5000 rpm |
||
| Par motor máximo (Net) |
85 Nm (63 ft·lb) (8.7 kgm) a 3000 rpm |
||
| Potencia específica (Net) |
32.1 kW/litre 43.7 ps/litre 43.1 bhp/litre 0.71 bhp/cu in |
||
(Net) |
77.91 Nm/litre
0.94 ft·lb/cu3 |
||
| Materiales de block / culata | |||
| Lubricación | |||
| Relación de compresión | 7.8:1 | ||
| Alimentación | 1 So carb | ||
| 979 kPa (142 psi) | |||
| Maximum RPM | |||
| Casquillos de cigüeñal | |||
| Engine coolant | Water | ||
| 272.75 cc | |||
| Aspiración | Normal | ||
| Compresor | N/A | ||
| intercooler | None | ||
| catalizador | N | ||
| Rendimiento | |||
| 0-80km/h | |||
| 0-60mph | |||
| 0-100km/h | |||
| 0-160km/h | |||
| 0-400m | |||
| 0-1000m | |||
| Velocidad máxima | 132 km/h (82 mph) | ||
| Power-to-weight ratio | Higher is better 51.8 PS/tonne (1000 kg) 0.05 PS/kg 38.1 kW/tonne (1000 kg) 0.04 kW/kg 51.09 bhp/tonne (1000 kg) 0.05 bhp/kg 0.02 bhp/lb |
||
| Weight-to-power ratio | Lower is better 26.25 kg/kW 43.85 lb/bhp |
||
| Consumos | |||
| Consumo de combustible | |||
| universal fuel consumption (calculated from the above) | |||
| litres/100km | |||
| km/litre | |||
| UK MPG | |||
| US MPG | |||
| Emisiones de CO2 | |||
| Carfolio Calculated CO2 ? | |||
| VED band (UK) | |||
| CO2 Effizienz (DE) | |||
| Chasis | |||
| Ubicación del motor | front | ||
| Engine layout | longitudinal | ||
| Tracción | rear wheel drive | ||
| Alimentación | N/A | ||
| Dirección, tipo | |||
| turns lock-to-lock | 3.000 | ||
| Turning circle | 10.50 m | ||
| Suspensión delantera | I.CS.VSlP. | ||
| Suspensión trasera | LA.SE. | ||
| Ruedas delante | |||
| Ruedas detrás | |||
| Neumáticos delante | 155 x 14 | ||
| Neumáticos detrás | 155 x 14 | ||
| Brakes F/R | Dr/Dr | ||
| Front brake diameter | |||
| Rear brake diameter | |||
| Braked area | |||
| Transmisión | 4 speed manual | ||
| Eje trasero desmultiplicación | 1 | ||
| Desmultiplicación grupo cónico | 4.20 | ||
| General | |||
| Carfolio.com ID | 64702 | ||
| Unidades producidas | |||
| Model code | |||
| RAC rating | 11.5 | ||
| Insurance classification | No information available | ||
| Tax band | No information available | ||
|
1960 Lancia Appia Series III Standard added 1996-03-21. Last modified 2013-02-28. |
|||