The Appia Series III Standard is a rear wheel drive saloon (sedan) motor vehicle with a front mounted engine, sold by Lancia.
Power is produced by an overhead valve, 1.1 litre naturally aspirated 4 cylinder motor, with 2 valves per cylinder that produces power and torque figures of 47 bhp (47.7 PS/35 kW) at 5000 rpm and 85 N·m (63 lb·ft/8.7 kgm) at 3000 rpm respectively.
Power is transmitted to the wheels by means of a 4 speed manual transmission.
It weighs a claimed 920 kg at the kerb.
Top quoted speed is 132 km/h (82 mph).
Full specs
|
|
|||
| bodywork | |||
|---|---|---|---|
| Body type | 4/5 seater sedan/saloon | ||
| Number of doors | 4 | ||
| Designer | |||
| dimensions & weights | |||
| Wheelbase | 2510 mm | 98.8 inches | |
| Track/tread (front) | 1178 mm | 46.4 inches | |
| Track/tread (rear) | 1182 mm | 46.5 inches | |
| Length | 4020 mm | 158.3 inches | |
| Width | 1480 mm | 58.3 inches | |
| Height | 1450 mm | 57.1 inches | |
| Ground clearance | 105 mm | 4.1 inches | |
| length:wheelbase ratio | 1.6 | ||
| Kerb weight | 920 kg | 2028 lb | |
| Weight distribution | |||
| fuel tank capacity | 38 litres | 8.4 [10] UK [US] gal. | |
| aerodynamics | |||
| Drag coefficient | |||
| Frontal area | |||
| CdA | |||
| Powertrain | |||
| engine type | naturally aspirated petrol | ||
| Engine manufacturer | Lancia | ||
| Engine code | |||
| Cylinders | V 4 | ||
| Capacity | 1.1 litre 1091 cc (66.577 cu in) |
||
| Bore × Stroke | 68 × 75 mm
2.68 × 2.95 in |
||
| Bore/stroke ratio | 0.91 | ||
| Valve gear | overhead valve (OHV)
2 valves per cylinder 8 valves in total |
||
| maximum power output (Net) |
47.7 PS (47 bhp) (35 kW) at 5000 rpm |
||
| maximum torque (Net) |
85 Nm (63 ft·lb) (8.7 kgm) at 3000 rpm |
||
| Specific output (Net) |
32.1 kW/litre 43.7 ps/litre 43.1 bhp/litre 0.71 bhp/cu in |
||
| Specific torque (Net) |
77.91 Nm/litre
0.94 ft·lb/cu3 |
||
| Engine construction | |||
| Lubrication | |||
| compression ratio | 7.8:1 | ||
| Fuel system | 1 So carb | ||
| bmep (brake mean effective pressure) | 979 kPa (142 psi) | ||
| Maximum RPM | |||
| crankshaft bearings | |||
| Engine coolant | Water | ||
| Unitary capacity | 272.75 cc | ||
| Aspiration | Normal | ||
| Compressor | N/A | ||
| Intercooler | None | ||
| Catalytic converter | N | ||
| performance | |||
| Acceleration 0-80km/h (50mph) | |||
| Acceleration 0-60mph | |||
| Acceleration 0-100km/h | |||
| Acceleration 0-160km/h (100mph) | |||
| Standing quarter-mile | |||
| Standing kilometre | |||
| Maximum speed | 132 km/h (82 mph) | ||
| Power-to-weight ratio | Higher is better 51.8 PS/tonne (1000 kg) 0.05 PS/kg 38.1 kW/tonne (1000 kg) 0.04 kW/kg 51.09 bhp/tonne (1000 kg) 0.05 bhp/kg 0.02 bhp/lb |
||
| Weight-to-power ratio | Lower is better 26.25 kg/kW 43.85 lb/bhp |
||
| fuel consumption | |||
| Fuel consumption | |||
| universal fuel consumption (calculated from the above) | |||
| litres/100km | |||
| km/litre | |||
| UK MPG | |||
| US MPG | |||
| Carbon dioxide emissions | |||
| Carfolio Calculated CO2 ? | |||
| VED band (UK) | |||
| CO2 Effizienz (DE) | |||
| chassis | |||
| Engine position | front | ||
| Engine layout | longitudinal | ||
| Drive wheels | rear wheel drive | ||
| Torque split | N/A | ||
| Steering | |||
| turns lock-to-lock | 3.000 | ||
| Turning circle | 10.50 m | ||
| Front suspension | I.CS.VSlP. | ||
| Rear suspension | LA.SE. | ||
| Wheel size front | |||
| Wheel size rear | |||
| Tyres front | 155 x 14 | ||
| Tyres rear | 155 x 14 | ||
| Brakes F/R | Dr/Dr | ||
| Front brake diameter | |||
| Rear brake diameter | |||
| Braked area | |||
| Gearbox | 4 speed manual | ||
| Top gear ratio | 1 | ||
| Final drive ratio | 4.20 | ||
| general | |||
| Carfolio.com ID | 64702 | ||
| Production total | |||
| Model code | |||
| RAC rating | 11.5 | ||
| Insurance classification | No information available | ||
| Tax band | No information available | ||
|
1960 Lancia Appia Series III Standard added 1996-03-21. Last modified 2013-02-28. |
|||