The Lancia Appia Series III Convertible is a convertible/cabriolet designed by Vignale with 2 doors and a front mounted engine which supplies the power through the rear wheels.
It's powered courtesy of a naturally aspirated engine of 1.1 litre capacity. This powerplant features overhead valve valve gear, 4 cylinder layout, and 2 valves per cylinder. It has an output of 59 bhp (60 PS/44 kW) of power at 5400 rpm, and maximum torque of 85 N·m (63 lb·ft/8.7 kgm) at 4400 rpm.
The power is transferred to the wheels through a 4 speed manual gearbox.
It weighs a quoted 920 kg at the kerb.
Top claimed speed is 146 km/h (91 mph).
Full specs
|
|
|||
| Carrocería | |||
|---|---|---|---|
| Carrocería | 2+2 seater convertible/cabriolet | ||
| Número de puertas | 2 | ||
| diseñado por | Vignale | ||
| Dimensiones y pesos | |||
| Distancia entre ejes | 2510 | 98.8 | |
| Vía delantera | 1178 | 46.4 | |
| Vía trasera | 1182 | 46.5 | |
| Longitud | 4150 | 163.4 | |
| Ancho | 1510 | 59.4 | |
| Altura | 1320 | 52 | |
| Despeje del suelo | |||
| Relación Largo:Dist.entre ejes | 1.65 | ||
| Peso en vacío | 920 kg | 2028 | |
| Distribución del peso (% adelante) | |||
| Capacità serbatoio | 38 litres | 8.4 [10] UK [US] gal. | |
| Aerodinámica | |||
| Coeficiente de penetración | |||
| Superficie frontal | |||
| SCx | |||
| Tren motriz | |||
| naturally aspirated petrol | |||
| Fabricante del motor | Lancia | ||
| Código de motor | |||
| Número de cilindros | V 4 | ||
| Cilindrada | 1.1 litre 1091 cc (66.577 cu in) |
||
| Diámetro × Carrera | 68 × 75 mm
2.68 × 2.95 in |
||
| Relación diámetro/carrera | 0.91 | ||
| Distribución | overhead valve (OHV)
2 válvulas por cilindro 8 Total de válvulas |
||
| Potencia nominal | 60 PS (59 bhp) (44 kW) a 5400 rpm |
||
| Par motor máximo | 85 Nm (63 ft·lb) (8.7 kgm) a 4400 rpm |
||
| Potencia específica | 40.3 kW/litre 54.8 ps/litre 54.1 bhp/litre 0.89 bhp/cu in |
||
|
77.91 Nm/litre
0.94 ft·lb/cu3 |
|||
| Materiales de block / culata | |||
| Lubricación | Cárter húmedo | ||
| Relación de compresión | 8.8:1 | ||
| Alimentación | |||
| 979 kPa (142 psi) | |||
| Maximum RPM | |||
| Casquillos de cigüeñal | |||
| Engine coolant | Water | ||
| 272.75 cc | |||
| Aspiración | Normal | ||
| Compresor | N/A | ||
| intercooler | None | ||
| catalizador | N | ||
| Rendimiento | |||
| 0-80km/h | |||
| 0-60mph | |||
| 0-100km/h | |||
| 0-160km/h | |||
| 0-400m | |||
| 0-1000m | |||
| Velocidad máxima | 146 km/h (91 mph) | ||
| Power-to-weight ratio | Higher is better 65.02 PS/tonne (1000 kg) 0.07 PS/kg 47.82 kW/tonne (1000 kg) 0.05 kW/kg 64.13 bhp/tonne (1000 kg) 0.06 bhp/kg 0.03 bhp/lb |
||
| Weight-to-power ratio | Lower is better 20.91 kg/kW 34.93 lb/bhp |
||
| Consumos | |||
| Consumo de combustible | |||
| universal fuel consumption (calculated from the above) | |||
| litres/100km | |||
| km/litre | |||
| UK MPG | |||
| US MPG | |||
| Emisiones de CO2 | |||
| Carfolio Calculated CO2 ? | |||
| VED band (UK) | |||
| CO2 Effizienz (DE) | |||
| Chasis | |||
| Ubicación del motor | front | ||
| Engine layout | longitudinal | ||
| Tracción | rear wheel drive | ||
| Alimentación | N/A | ||
| Dirección, tipo | |||
| turns lock-to-lock | |||
| Turning circle | |||
| Suspensión delantera | I.CS. | ||
| Suspensión trasera | LA.SE. | ||
| Ruedas delante | |||
| Ruedas detrás | |||
| Neumáticos delante | 155 x 15 | ||
| Neumáticos detrás | 155 x 15 | ||
| Brakes F/R | Dr/Dr | ||
| Front brake diameter | |||
| Rear brake diameter | |||
| Braked area | |||
| Transmisión | 4 speed manual | ||
| Eje trasero desmultiplicación | |||
| Desmultiplicación grupo cónico | |||
| General | |||
| Carfolio.com ID | 138578 | ||
| Unidades producidas | |||
| Model code | |||
| RAC rating | 11.5 | ||
| Insurance classification | No information available | ||
| Tax band | No information available | ||
|
1963 Lancia Appia Series III Convertible added 2006-02-11. Last modified 2013-02-28. |
|||