The Lancia Appia Series III Convertible is a convertible/cabriolet designed by Vignale with 2 doors and a front mounted engine which supplies the power through the rear wheels.
It's powered courtesy of a naturally aspirated engine of 1.1 litre capacity. This powerplant features overhead valve valve gear, 4 cylinder layout, and 2 valves per cylinder. It has an output of 59 bhp (60 PS/44 kW) of power at 5400 rpm, and maximum torque of 85 N·m (63 lb·ft/8.7 kgm) at 4400 rpm.
The power is transferred to the wheels through a 4 speed manual gearbox.
It weighs a quoted 920 kg at the kerb.
Top claimed speed is 146 km/h (91 mph).
Full specs
|
|
|||
| Carrosserie | |||
|---|---|---|---|
| Carrosserie | 2+2 seater convertible/cabriolet | ||
| Nombre de portes | 2 | ||
| Designer | Vignale | ||
| Dimensions et poids | |||
| Empattement | 2510 | 98.8 | |
| Voies AV | 1178 | 46.4 | |
| Voies AR | 1182 | 46.5 | |
| Longueur | 4150 | 163.4 | |
| Largeur | 1510 | 59.4 | |
| Hauteur | 1320 | 52 | |
| Garde au sol | |||
| 1.65 | |||
| Poids avec pleins | 920 kg | 2028 | |
| Répartition poids AV | |||
| Réservoir à essence | 38 litres | 8.4 [10] UK [US] gal. | |
| Caractéristiques aérodynamique | |||
| Coefficient de pénétration | |||
| maître-couple | |||
| SCx | |||
| naturally aspirated petrol | |||
| Constructeur du moteur | Lancia | ||
| Type moteur | |||
| Cylinders | V 4 | ||
| Cylindrée | 1.1 litre 1091 cc (66.577 cu in) |
||
| Alésage × Course | 68 × 75 mm
2.68 × 2.95 in |
||
| Rapport alésage / course | 0.91 | ||
| Distribution | overhead valve (OHV)
2 Soupapes par cylindre 8 Total vannes |
||
| Puissance maximale | 60 PS (59 bhp) (44 kW) à 5400 tr/mn |
||
| Couple maximale | 85 Nm (63 ft·lb) (8.7 kgm) à 4400 tr/mn |
||
| Specific output | 40.3 kW/litre 54.8 ps/litre 54.1 bhp/litre 0.89 bhp/cu in |
||
|
77.91 Nm/litre
0.94 ft·lb/cu3 |
|||
| Construction | |||
| Lubrification | Carter humide | ||
| Taux de compression | 8.8:1 | ||
| Carburant | |||
| bmep (brake mean effective pressure) | 979 kPa (142 psi) | ||
| Régime maximal | |||
| Nombre de paliers de vilebrequin | |||
| Refroidissement | Water | ||
| Cylindrée Unitaire | 272.75 cc | ||
| Aspiration | Normal | ||
| Compressor | N/A | ||
| Intercooler | None | ||
| Catalyseur | N | ||
| Performances | |||
| 0-80km/h | |||
| 0-60mph | |||
| 0-100km/h | |||
| 0-160km/h | |||
| 0-400m | |||
| 0-1000m | |||
| Vitesse | 146 km/h (91 mph) | ||
| Power-to-weight ratio | Higher is better 65.02 PS/tonne (1000 kg) 0.07 PS/kg 47.82 kW/tonne (1000 kg) 0.05 kW/kg 64.13 bhp/tonne (1000 kg) 0.06 bhp/kg 0.03 bhp/lb |
||
| Weight-to-power ratio | Lower is better 20.91 kg/kW 34.93 lb/bhp |
||
| Consommation | |||
| Consommation | |||
| universal fuel consumption (calculated from the above) | |||
| litres/100km | |||
| km/litre | |||
| UK MPG | |||
| US MPG | |||
| Emissions de CO₂ | |||
| Carfolio Calculated CO2 ? | |||
| VED band (UK) | |||
| CO2 Effizienz (DE) | |||
| Châssis | |||
| Emplacement de moteur | front | ||
| Engine layout | longitudinal | ||
| Traction | rear wheel drive | ||
| Répartition du couple | N/A | ||
| Direction | |||
| turns lock-to-lock | |||
| Turning circle | |||
| Suspension AV | I.CS. | ||
| Suspension AR | LA.SE. | ||
| Roues AV | |||
| Roues AR | |||
| Pneumatiques AV | 155 x 15 | ||
| Pneumatiques AR | 155 x 15 | ||
| Freins AV/AR | Dr/Dr | ||
| Diamètre des freins AV | |||
| Diamètre des freins AR | |||
| Braked area | |||
| Transmission | 4 speed manual | ||
| Rapport de démultiplication supérieure | |||
| Rapport de pont | |||
| Généralités | |||
| Carfolio.com ID | 138578 | ||
| Production total | |||
| Type mines | |||
| RAC rating | 11.5 | ||
| Insurance classification | No information available | ||
| Tax band | No information available | ||
|
1963 Lancia Appia Series III Convertible added 2006-02-11. Last modified 2013-02-28. |
|||