Lancia Appia Series II is a car that has a 4 door saloon (sedan) body style with a front mounted engine driving through the rear wheels.
It's powered courtesy of a naturally aspirated engine of 1.1 litre capacity. This unit features overhead valve valve gear, 4 cylinder layout, and 2 valves per cylinder. It produces 43.5 bhp (44.1 PS/32.4 kW) of power at 4800 rpm, and maximum torque of 76 N·m (56 lb·ft/7.8 kgm) at 3000 rpm.
The engine transmits power to the wheels by means of a 4 speed manual gearbox.
It weighs a claimed 864 kg at the kerb.
Full specs
|
|
|||
| Carrosserie | |||
|---|---|---|---|
| Carrosserie | 4/5 seater sedan/saloon | ||
| Nombre de portes | 4 | ||
| Designer | |||
| Dimensions et poids | |||
| Empattement | 2510 | 98.8 | |
| Voies AV | 1178 | 46.4 | |
| Voies AR | 1181 | 46.5 | |
| Longueur | 4010 | 157.9 | |
| Largeur | 1420 | 55.9 | |
| Hauteur | 1405 | 55.3 | |
| Garde au sol | 152 | 6 | |
| 1.6 | |||
| Poids avec pleins | 864 kg | 1905 | |
| Répartition poids AV | |||
| Réservoir à essence | |||
| Caractéristiques aérodynamique | |||
| Coefficient de pénétration | |||
| maître-couple | |||
| SCx | |||
| naturally aspirated petrol | |||
| Constructeur du moteur | Lancia | ||
| Type moteur | |||
| Cylinders | V 4 | ||
| Cylindrée | 1.1 litre 1091 cc (66.577 cu in) |
||
| Alésage × Course | 68 × 75 mm
2.68 × 2.95 in |
||
| Rapport alésage / course | 0.91 | ||
| Distribution | overhead valve (OHV)
2 Soupapes par cylindre 8 Total vannes |
||
| Puissance maximale (Gross) |
44.1 PS (43.5 bhp) (32.4 kW) à 4800 tr/mn |
||
| Couple maximale (Gross) |
76 Nm (56 ft·lb) (7.8 kgm) à 3000 tr/mn |
||
| Specific output (Gross) |
29.7 kW/litre 40.4 ps/litre 39.9 bhp/litre 0.65 bhp/cu in |
||
(Gross) |
69.66 Nm/litre
0.84 ft·lb/cu3 |
||
| Construction | |||
| Lubrification | |||
| Taux de compression | 7.2:1 | ||
| Carburant | 1 So carb | ||
| bmep (brake mean effective pressure) | 875.4 kPa (127 psi) | ||
| Régime maximal | |||
| Nombre de paliers de vilebrequin | |||
| Refroidissement | Water | ||
| Cylindrée Unitaire | 272.75 cc | ||
| Aspiration | Normal | ||
| Compressor | N/A | ||
| Intercooler | None | ||
| Catalyseur | N | ||
| Performances | |||
| 0-80km/h | |||
| 0-60mph | |||
| 0-100km/h | |||
| 0-160km/h | |||
| 0-400m | |||
| 0-1000m | |||
| Vitesse | |||
| Power-to-weight ratio | Higher is better 51.05 PS/tonne (1000 kg) 0.05 PS/kg 37.54 kW/tonne (1000 kg) 0.04 kW/kg 50.35 bhp/tonne (1000 kg) 0.05 bhp/kg 0.02 bhp/lb |
||
| Weight-to-power ratio | Lower is better 26.64 kg/kW 44.49 lb/bhp |
||
| Consommation | |||
| Consommation | |||
| universal fuel consumption (calculated from the above) | |||
| litres/100km | |||
| km/litre | |||
| UK MPG | |||
| US MPG | |||
| Emissions de CO₂ | |||
| Carfolio Calculated CO2 ? | |||
| VED band (UK) | |||
| CO2 Effizienz (DE) | |||
| Châssis | |||
| Emplacement de moteur | front | ||
| Engine layout | longitudinal | ||
| Traction | rear wheel drive | ||
| Répartition du couple | N/A | ||
| Direction | |||
| turns lock-to-lock | |||
| Turning circle | |||
| Suspension AV | I.CS. | ||
| Suspension AR | LA.SE. | ||
| Roues AV | |||
| Roues AR | |||
| Pneumatiques AV | |||
| Pneumatiques AR | |||
| Freins AV/AR | Dr/Dr | ||
| Diamètre des freins AV | |||
| Diamètre des freins AR | |||
| Braked area | |||
| Transmission | 4 speed manual | ||
| Rapport de démultiplication supérieure | 1 | ||
| Rapport de pont | 4.22 | ||
| Généralités | |||
| Carfolio.com ID | 64922 | ||
| Production total | |||
| Type mines | |||
| RAC rating | 11.5 | ||
| Insurance classification | No information available | ||
| Tax band | No information available | ||
|
1953 Lancia Appia Series II added before December 1995. Last modified 2013-02-28. |
|||