The Interceptor FF is an all wheel drive Touring designed coupé road car with a front located engine, from Jensen.
Its 6.3 litre engine is a naturally aspirated, overhead valve, 8 cylinder that develops 325 bhp (330 PS/242 kW) of power at 4600 rpm, and maximum torque of 576 N·m (425 lb·ft/58.7 kgm) at 2800 rpm.
The engine drives the wheels by means of a 3 speed automatic gearbox.
The claimed kerb weight is 1830 kg.
Maximum speed quoted is 210 km/h, which is 130 mph.
Full specs
|
|
|||
| Carrocería | |||
|---|---|---|---|
| Carrocería | 2+2 seater fixed-head coupé | ||
| Número de puertas | 2 | ||
| diseñado por | Touring | ||
| Dimensiones y pesos | |||
| Distancia entre ejes | 2769 | 109 | |
| Vía delantera | 1422 | 56 | |
| Vía trasera | 1448 | 57 | |
| Longitud | 4851 | 191 | |
| Ancho | 1778 | 70 | |
| Altura | 1340 | 52.8 | |
| Despeje del suelo | 127 | 5 | |
| Relación Largo:Dist.entre ejes | 1.75 | ||
| Peso en vacío | 1830 kg | 4034 | |
| Distribución del peso (% adelante) | 53% front | ||
| Capacità serbatoio | 72.7 litres | 16 [19.2] UK [US] gal. | |
| Aerodinámica | |||
| Coeficiente de penetración | |||
| Superficie frontal | |||
| SCx | |||
| Tren motriz | |||
| naturally aspirated petrol | |||
| Fabricante del motor | Chrysler | ||
| Código de motor | |||
| Número de cilindros | V 8 in 90° vee | ||
| Cilindrada | 6.3 litre 6286 cc (383.595 cu in) |
||
| Diámetro × Carrera | 107.95 × 85.85 mm
4.25 × 3.38 in |
||
| Relación diámetro/carrera | 1.26 | ||
| Distribución | overhead valve (OHV)
2 válvulas por cilindro 16 Total de válvulas |
||
| Potencia nominal (Gross) |
330 PS (325 bhp) (242 kW) a 4600 rpm |
||
| Par motor máximo (Gross) |
576 Nm (425 ft·lb) (58.7 kgm) a 2800 rpm |
||
| Potencia específica (Gross) |
38.6 kW/litre 52.4 ps/litre 51.7 bhp/litre 0.85 bhp/cu in |
||
(Gross) |
91.63 Nm/litre
1.11 ft·lb/cu3 |
||
| Materiales de block / culata | cast iron block & heads | ||
| Lubricación | Cárter húmedo | ||
| Relación de compresión | 10:1 | ||
| Alimentación | 1 Ca carb | ||
| 1151.5 kPa (167 psi) | |||
| Maximum RPM | 5100 rpm | ||
| Casquillos de cigüeñal | 5 | ||
| Engine coolant | Water | ||
| 785.75 cc | |||
| Aspiración | Normal | ||
| Compresor | N/A | ||
| intercooler | None | ||
| catalizador | N | ||
| Rendimiento | |||
| 0-80km/h | 5.8 s | ||
| 0-60mph | 7.7 s | ||
| 0-100km/h | |||
| 0-160km/h | 22.4 s | ||
| 0-400m | 16.1 s | ||
| 0-1000m | |||
| Velocidad máxima | 210 km/h (130 mph) | ||
| Power-to-weight ratio | Higher is better 180.06 PS/tonne (1000 kg) 0.18 PS/kg 132.43 kW/tonne (1000 kg) 0.13 kW/kg 177.6 bhp/tonne (1000 kg) 0.18 bhp/kg 0.08 bhp/lb |
||
| Weight-to-power ratio | Lower is better 7.55 kg/kW 12.61 lb/bhp |
||
| Consumos | |||
| Consumo de combustible | |||
| universal fuel consumption (calculated from the above) | |||
| litres/100km | |||
| km/litre | |||
| UK MPG | |||
| US MPG | |||
| Emisiones de CO2 | |||
| Carfolio Calculated CO2 ? | |||
| VED band (UK) | |||
| CO2 Effizienz (DE) | |||
| Chasis | |||
| Ubicación del motor | front | ||
| Engine layout | longitudinal | ||
| Tracción | all wheel drive | ||
| Alimentación | 37/63 | ||
| Dirección, tipo | |||
| turns lock-to-lock | 3.500 | ||
| Turning circle | 11.30 m | ||
| Suspensión delantera | I.CS.W.ARB. | ||
| Suspensión trasera | LA.SE.PR. | ||
| Ruedas delante | 5J | ||
| Ruedas detrás | 5J | ||
| Neumáticos delante | Dunlop RS5 6.70-15 | ||
| Neumáticos detrás | Dunlop RS5 6.70-15 | ||
| Brakes F/R | Di/Di-S-ABS | ||
| Front brake diameter | 289 mm | ||
| Rear brake diameter | 273 mm | ||
| Braked area | 2761 cm2 | ||
| Transmisión | 3 speed automatic | ||
| Eje trasero desmultiplicación | 1 | ||
| Desmultiplicación grupo cónico | 3.07 | ||
| General | |||
| Carfolio.com ID | 63745 | ||
| Unidades producidas | 263 | ||
| Model code | |||
| RAC rating | 57.8 | ||
| Insurance classification | No information available | ||
| Tax band | No information available | ||
|
1968 Jensen Interceptor FF added before December 1995. Last modified 2013-02-28. |
|||