The Humber Hawk Ser II is a saloon (sedan) with 4 doors and a front mounted engine which transmits its power through the rear wheels.
The 4 cylinder, overhead valve naturally aspirated engine has 2 valves per cylinder and a volume of 2.3 litres. For this model it provides power and torque figures of 73 bhp (74 PS/54 kW) at 4400 rpm and 163 Nm (120 lbft/16.6 kgm) at 2300 rpm respectively.
A 4 speed manual 'box transfers the power to the driven wheels.
The quoted kerb weight is 1400 kg.
Full specs
|
|
|||
| Carrocería | |||
|---|---|---|---|
| Carrocería | 4/5 seater sedan/saloon | ||
| Número de puertas | 4 | ||
| diseñado por | |||
| Dimensiones y pesos | |||
| Distancia entre ejes | 2794 | 110 | |
| Vía delantera | 1445 | 56.9 | |
| Vía trasera | 1410 | 55.5 | |
| Longitud | 4693 | 184.8 | |
| Ancho | 1765 | 69.5 | |
| Altura | 1549 | 61 | |
| Despeje del suelo | 178 | 7 | |
| Relación Largo:Dist.entre ejes | 1.68 | ||
| Peso en vacío | 1400 kg | 3086 | |
| Distribución del peso (% adelante) | |||
| Capacità serbatoio | 56.8 litres | 12.5 [15] UK [US] gal. | |
| Aerodinámica | |||
| Coeficiente de penetración | |||
| Superficie frontal | |||
| SCx | |||
| Tren motriz | |||
| naturally aspirated petrol | |||
| Fabricante del motor | Humber | ||
| Código de motor | |||
| Número de cilindros | Straight 4 | ||
| Cilindrada | 2.3 litre 2267 cc (138.341 cu in) |
||
| Diámetro × Carrera | 81 × 110 mm
3.19 × 4.33 in |
||
| Relación diámetro/carrera | 0.74 | ||
| Distribución | overhead valve (OHV)
2 válvulas por cilindro 8 Total de válvulas |
||
| Potencia nominal (Net) |
74 PS (73 bhp) (54 kW) a 4400 rpm |
||
| Par motor máximo (Net) |
163 Nm (120 ft·lb) (16.6 kgm) a 2300 rpm |
||
| Potencia específica (Net) |
24 kW/litre 32.6 ps/litre 32.2 bhp/litre 0.53 bhp/cu in |
||
(Net) |
71.9 Nm/litre
0.87 ft·lb/cu3 |
||
| Materiales de block / culata | |||
| Lubricación | |||
| Relación de compresión | 7.5:1 | ||
| Alimentación | 1 Ze carb | ||
| 903.5 kPa (131 psi) | |||
| Maximum RPM | |||
| Casquillos de cigüeñal | |||
| Engine coolant | Water | ||
| 566.75 cc | |||
| Aspiración | Normal | ||
| Compresor | N/A | ||
| intercooler | None | ||
| catalizador | N | ||
| Rendimiento | |||
| 0-80km/h | |||
| 0-60mph | |||
| 0-100km/h | |||
| 0-160km/h | |||
| 0-400m | |||
| 0-1000m | |||
| Velocidad máxima | |||
| Power-to-weight ratio | Higher is better 52.87 PS/tonne (1000 kg) 0.05 PS/kg 38.88 kW/tonne (1000 kg) 0.04 kW/kg 52.14 bhp/tonne (1000 kg) 0.05 bhp/kg 0.02 bhp/lb |
||
| Weight-to-power ratio | Lower is better 25.72 kg/kW 42.96 lb/bhp |
||
| Consumos | |||
| Consumo de combustible | |||
| universal fuel consumption (calculated from the above) | |||
| litres/100km | |||
| km/litre | |||
| UK MPG | |||
| US MPG | |||
| Emisiones de CO2 | |||
| Carfolio Calculated CO2 ? | |||
| VED band (UK) | |||
| CO2 Effizienz (DE) | |||
| Chasis | |||
| Ubicación del motor | front | ||
| Engine layout | longitudinal | ||
| Tracción | rear wheel drive | ||
| Alimentación | N/A | ||
| Dirección, tipo | |||
| turns lock-to-lock | 4.000 | ||
| Turning circle | 11.60 m | ||
| Suspensión delantera | I.CS. | ||
| Suspensión trasera | LA.SE. | ||
| Ruedas delante | |||
| Ruedas detrás | |||
| Neumáticos delante | |||
| Neumáticos detrás | |||
| Brakes F/R | Di/Dr-S | ||
| Front brake diameter | |||
| Rear brake diameter | |||
| Braked area | 2587 cm2 | ||
| Transmisión | 4 speed manual | ||
| Eje trasero desmultiplicación | 1 | ||
| Desmultiplicación grupo cónico | 4.22 | ||
| General | |||
| Carfolio.com ID | 57816 | ||
| Unidades producidas | |||
| Model code | |||
| RAC rating | 16.3 | ||
| Insurance classification | No information available | ||
| Tax band | No information available | ||
|
1960 Humber Hawk Ser II added before December 1995. Last modified 2013-02-28. |
|||