The Humber Hawk Ser II is a saloon (sedan) with 4 doors and a front mounted engine which transmits its power through the rear wheels.
The 4 cylinder, overhead valve naturally aspirated engine has 2 valves per cylinder and a volume of 2.3 litres. For this model it provides power and torque figures of 73 bhp (74 PS/54 kW) at 4400 rpm and 163 Nm (120 lbft/16.6 kgm) at 2300 rpm respectively.
A 4 speed manual 'box transfers the power to the driven wheels.
The quoted kerb weight is 1400 kg.
Full specs
|
|
|||
| bodywork | |||
|---|---|---|---|
| Body type | 4/5 seater sedan/saloon | ||
| Number of doors | 4 | ||
| Designer | |||
| dimensions & weights | |||
| Wheelbase | 2794 mm | 110 inches | |
| Track/tread (front) | 1445 mm | 56.9 inches | |
| Track/tread (rear) | 1410 mm | 55.5 inches | |
| Length | 4693 mm | 184.8 inches | |
| Width | 1765 mm | 69.5 inches | |
| Height | 1549 mm | 61 inches | |
| Ground clearance | 178 mm | 7 inches | |
| length:wheelbase ratio | 1.68 | ||
| Kerb weight | 1400 kg | 3086 lb | |
| Weight distribution | |||
| fuel tank capacity | 56.8 litres | 12.5 [15] UK [US] gal. | |
| aerodynamics | |||
| Drag coefficient | |||
| Frontal area | |||
| CdA | |||
| Powertrain | |||
| engine type | naturally aspirated petrol | ||
| Engine manufacturer | Humber | ||
| Engine code | |||
| Cylinders | Straight 4 | ||
| Capacity | 2.3 litre 2267 cc (138.341 cu in) |
||
| Bore × Stroke | 81 × 110 mm
3.19 × 4.33 in |
||
| Bore/stroke ratio | 0.74 | ||
| Valve gear | overhead valve (OHV)
2 valves per cylinder 8 valves in total |
||
| maximum power output (Net) |
74 PS (73 bhp) (54 kW) at 4400 rpm |
||
| maximum torque (Net) |
163 Nm (120 ft·lb) (16.6 kgm) at 2300 rpm |
||
| Specific output (Net) |
24 kW/litre 32.6 ps/litre 32.2 bhp/litre 0.53 bhp/cu in |
||
| Specific torque (Net) |
71.9 Nm/litre
0.87 ft·lb/cu3 |
||
| Engine construction | |||
| Lubrication | |||
| compression ratio | 7.5:1 | ||
| Fuel system | 1 Ze carb | ||
| bmep (brake mean effective pressure) | 903.5 kPa (131 psi) | ||
| Maximum RPM | |||
| crankshaft bearings | |||
| Engine coolant | Water | ||
| Unitary capacity | 566.75 cc | ||
| Aspiration | Normal | ||
| Compressor | N/A | ||
| Intercooler | None | ||
| Catalytic converter | N | ||
| performance | |||
| Acceleration 0-80km/h (50mph) | |||
| Acceleration 0-60mph | |||
| Acceleration 0-100km/h | |||
| Acceleration 0-160km/h (100mph) | |||
| Standing quarter-mile | |||
| Standing kilometre | |||
| Maximum speed | |||
| Power-to-weight ratio | Higher is better 52.87 PS/tonne (1000 kg) 0.05 PS/kg 38.88 kW/tonne (1000 kg) 0.04 kW/kg 52.14 bhp/tonne (1000 kg) 0.05 bhp/kg 0.02 bhp/lb |
||
| Weight-to-power ratio | Lower is better 25.72 kg/kW 42.96 lb/bhp |
||
| fuel consumption | |||
| Fuel consumption | |||
| universal fuel consumption (calculated from the above) | |||
| litres/100km | |||
| km/litre | |||
| UK MPG | |||
| US MPG | |||
| Carbon dioxide emissions | |||
| Carfolio Calculated CO2 ? | |||
| VED band (UK) | |||
| CO2 Effizienz (DE) | |||
| chassis | |||
| Engine position | front | ||
| Engine layout | longitudinal | ||
| Drive wheels | rear wheel drive | ||
| Torque split | N/A | ||
| Steering | |||
| turns lock-to-lock | 4.000 | ||
| Turning circle | 11.60 m | ||
| Front suspension | I.CS. | ||
| Rear suspension | LA.SE. | ||
| Wheel size front | |||
| Wheel size rear | |||
| Tyres front | |||
| Tyres rear | |||
| Brakes F/R | Di/Dr-S | ||
| Front brake diameter | |||
| Rear brake diameter | |||
| Braked area | 2587 cm2 | ||
| Gearbox | 4 speed manual | ||
| Top gear ratio | 1 | ||
| Final drive ratio | 4.22 | ||
| general | |||
| Carfolio.com ID | 57816 | ||
| Production total | |||
| Model code | |||
| RAC rating | 16.3 | ||
| Insurance classification | No information available | ||
| Tax band | No information available | ||
|
1960 Humber Hawk Ser II added before December 1995. Last modified 2013-02-28. |
|||