The Standard Sedan is an automobile from Holden, with rear wheel drive, a front mounted engine and a 4 door saloon (sedan) body style.
Power is supplied by an overhead valve, 2.3 litre naturally aspirated 6 cylinder motor, with 2 valves per cylinder that provides power and torque figures of 75 bhp (76 PS/56 kW) at 4200 rpm and 163 N·m (120 lb·ft/16.6 kgm) at 1400 rpm respectively.
A 3 speed manual 'box transmits the power to the wheels.
Claimed kerb weight is 1116 kg.
Full specs
|
|
|||
| Carrocería | |||
|---|---|---|---|
| Carrocería | 4/5 seater sedan/saloon | ||
| Número de puertas | 4 | ||
| diseñado por | |||
| Dimensiones y pesos | |||
| Distancia entre ejes | 2667 | 105 | |
| Vía delantera | |||
| Vía trasera | |||
| Longitud | 4611 | 181.5 | |
| Ancho | 1703 | 67 | |
| Altura | 1521 | 59.9 | |
| Despeje del suelo | 186 | 7.3 | |
| Relación Largo:Dist.entre ejes | 1.73 | ||
| Peso en vacío | 1116 kg | 2460 | |
| Distribución del peso (% adelante) | |||
| Capacità serbatoio | |||
| Aerodinámica | |||
| Coeficiente de penetración | |||
| Superficie frontal | |||
| SCx | |||
| Tren motriz | |||
| naturally aspirated petrol | |||
| Fabricante del motor | GM | ||
| Código de motor | |||
| Número de cilindros | Straight 6 | ||
| Cilindrada | 2.3 litre 2265 cc (138.219 cu in) |
||
| Diámetro × Carrera | 77.8 × 79.4 mm
3.06 × 3.13 in |
||
| Relación diámetro/carrera | 0.98 | ||
| Distribución | overhead valve (OHV)
2 válvulas por cilindro 12 Total de válvulas |
||
| Potencia nominal (gross) |
76 PS (75 bhp) (56 kW) a 4200 rpm |
||
| Par motor máximo (gross) |
163 Nm (120 ft·lb) (16.6 kgm) a 1400 rpm |
||
| Potencia específica (gross) |
24.7 kW/litre 33.6 ps/litre 33.1 bhp/litre 0.54 bhp/cu in |
||
(gross) |
71.96 Nm/litre
0.87 ft·lb/cu3 |
||
| Materiales de block / culata | |||
| Lubricación | Cárter húmedo | ||
| Relación de compresión | 7.25:1 | ||
| Alimentación | 1 carburettor | ||
| 904.3 kPa (131.2 psi) | |||
| Maximum RPM | |||
| Casquillos de cigüeñal | |||
| Engine coolant | Water | ||
| 377.5 cc | |||
| Aspiración | Normal | ||
| Compresor | N/A | ||
| intercooler | None | ||
| catalizador | N | ||
| Rendimiento | |||
| 0-80km/h | |||
| 0-60mph | |||
| 0-100km/h | |||
| 0-160km/h | |||
| 0-400m | |||
| 0-1000m | |||
| Velocidad máxima | |||
| Power-to-weight ratio | Higher is better 68.14 PS/tonne (1000 kg) 0.07 PS/kg 50.11 kW/tonne (1000 kg) 0.05 kW/kg 67.2 bhp/tonne (1000 kg) 0.07 bhp/kg 0.03 bhp/lb |
||
| Weight-to-power ratio | Lower is better 19.95 kg/kW 33.33 lb/bhp |
||
| Consumos | |||
| Consumo de combustible | |||
| universal fuel consumption (calculated from the above) | |||
| litres/100km | |||
| km/litre | |||
| UK MPG | |||
| US MPG | |||
| Emisiones de CO2 | |||
| Carfolio Calculated CO2 ? | |||
| VED band (UK) | |||
| CO2 Effizienz (DE) | |||
| Chasis | |||
| Ubicación del motor | front | ||
| Engine layout | longitudinal | ||
| Tracción | rear wheel drive | ||
| Alimentación | N/A | ||
| Dirección, tipo | |||
| turns lock-to-lock | |||
| Turning circle | |||
| Suspensión delantera | |||
| Suspensión trasera | |||
| Ruedas delante | 4½ x 13 | ||
| Ruedas detrás | 4½ x 13 | ||
| Neumáticos delante | 6.40 x 13 4PLY | ||
| Neumáticos detrás | 6.40 x 13 4PLY | ||
| Brakes F/R | Dr/Dr | ||
| Front brake diameter | |||
| Rear brake diameter | |||
| Braked area | |||
| Transmisión | 3 speed manual | ||
| Eje trasero desmultiplicación | 1 | ||
| Desmultiplicación grupo cónico | 3.89 | ||
| General | |||
| Carfolio.com ID | 642840 | ||
| Unidades producidas | |||
| Model code | |||
| RAC rating | 22.5 | ||
| Insurance classification | No information available | ||
| Tax band | No information available | ||
|
1960 Holden Standard Sedan added 2020-02-18. Last modified 2020-03-16. |
|||