The Francis Lombardi FL 1 is a rear wheel drive vehicle, with its engine located amidships, and a 2 door coupé body.
The Francis Lombardi FL 1 belongs to the Tipo 7102 range of cars from Francis Lombardi.
Its engine is a naturally aspirated petrol, 2 litre, double overhead camshaft 4 cylinder with 2 valves per cylinder. This powerplant produces 123 bhp (125 PS/92 kW) of power at 5800 rpm, and maximum torque of 172 N·m (127 lb·ft/17.5 kgm) at 3700 rpm.
The engine delivers its power through to the wheels via a 5 speed manual gearbox.
It weighs a claimed 800 kg at the kerb.
Maximum speed claimed is 200 km/h, which is 124 mph.
Full specs
|
|
|||
| Carrosserie | |||
|---|---|---|---|
| Carrosserie | 2 seater fixed-head coupé | ||
| Nombre de portes | 2 | ||
| Designer | |||
| Dimensions et poids | |||
| Empattement | 2420 | 95.3 | |
| Voies AV | 1400 | 55.1 | |
| Voies AR | 1440 | 56.7 | |
| Longueur | 4214 | 165.9 | |
| Largeur | 1700 | 66.9 | |
| Hauteur | 1135 | 44.7 | |
| Garde au sol | 160 | 6.3 | |
| 1.74 | |||
| Poids avec pleins | 800 kg | 1764 | |
| Répartition poids AV | 44% front | ||
| Réservoir à essence | 50 litres | 11 [13.2] UK [US] gal. | |
| Caractéristiques aérodynamique | |||
| Coefficient de pénétration | |||
| maître-couple | |||
| SCx | |||
| naturally aspirated petrol | |||
| Constructeur du moteur | Lancia | ||
| Type moteur | 820.403 | ||
| Cylinders | Flat 4 | ||
| Cylindrée | 2 litre 1991 cc (121.498 cu in) |
||
| Alésage × Course | 89 × 80 mm
3.5 × 3.15 in |
||
| Rapport alésage / course | 1.11 | ||
| Distribution | double overhead camshaft (DOHC)
2 Soupapes par cylindre 8 Total vannes |
||
| Puissance maximale (DIN) |
125 PS (123 bhp) (92 kW) à 5800 tr/mn |
||
| Couple maximale (DIN) |
172 Nm (127 ft·lb) (17.5 kgm) à 3700 tr/mn |
||
| Specific output (DIN) |
46.1 kW/litre 62.6 ps/litre 61.8 bhp/litre 1.01 bhp/cu in |
||
(DIN) |
86.39 Nm/litre
1.04 ft·lb/cu3 |
||
| Construction | |||
| Lubrification | Carter humide | ||
| Taux de compression | 9.2:1 | ||
| Carburant | Bosch fuel injection | ||
| bmep (brake mean effective pressure) | 1085.6 kPa (157.5 psi) | ||
| Régime maximal | |||
| Nombre de paliers de vilebrequin | 3 | ||
| Refroidissement | Water | ||
| Cylindrée Unitaire | 497.75 cc | ||
| Aspiration | Normal | ||
| Compressor | N/A | ||
| Intercooler | None | ||
| Catalyseur | N | ||
| Performances | |||
| 0-80km/h | |||
| 0-60mph | |||
| 0-100km/h | |||
| 0-160km/h | |||
| 0-400m | |||
| 0-1000m | |||
| Vitesse | 200 km/h (124 mph) | ||
| Power-to-weight ratio | Higher is better 155.89 PS/tonne (1000 kg) 0.16 PS/kg 114.65 kW/tonne (1000 kg) 0.11 kW/kg 153.75 bhp/tonne (1000 kg) 0.15 bhp/kg 0.07 bhp/lb |
||
| Weight-to-power ratio | Lower is better 8.72 kg/kW 14.57 lb/bhp |
||
| Consommation | |||
| Consommation | |||
| universal fuel consumption (calculated from the above) | |||
| litres/100km | |||
| km/litre | |||
| UK MPG | |||
| US MPG | |||
| Emissions de CO₂ | |||
| Carfolio Calculated CO2 ? | |||
| VED band (UK) | |||
| CO2 Effizienz (DE) | |||
| Châssis | |||
| Emplacement de moteur | mid | ||
| Engine layout | longitudinal | ||
| Traction | rear wheel drive | ||
| Répartition du couple | N/A | ||
| Direction | |||
| turns lock-to-lock | |||
| Turning circle | |||
| Suspension AV | |||
| Suspension AR | |||
| Roues AV | 6J x 14 | ||
| Roues AR | 7½J x 14 | ||
| Pneumatiques AV | 185/70 VR 14 | ||
| Pneumatiques AR | 205/70 VR 14 | ||
| Freins AV/AR | Di/Di-S | ||
| Diamètre des freins AV | |||
| Diamètre des freins AR | |||
| Braked area | |||
| Transmission | 5 speed manual | ||
| Rapport de démultiplication supérieure | 1 | ||
| Rapport de pont | 3.55 | ||
| Généralités | |||
| Carfolio.com ID | 228811 | ||
| Production total | |||
| Type mines | |||
| Tipo 7102 | |||
| RAC rating | 19.6 | ||
| Insurance classification | No information available | ||
| Tax band | No information available | ||
|
1972 Francis Lombardi FL 1 added 2011-01-08. Last modified 2020-02-02. |
|||