The Francis Lombardi FL 1 is a rear wheel drive vehicle, with its engine located amidships, and a 2 door coupé body.
The Francis Lombardi FL 1 belongs to the Tipo 7102 range of cars from Francis Lombardi.
Its engine is a naturally aspirated petrol, 2 litre, double overhead camshaft 4 cylinder with 2 valves per cylinder. This powerplant produces 123 bhp (125 PS/92 kW) of power at 5800 rpm, and maximum torque of 172 N·m (127 lb·ft/17.5 kgm) at 3700 rpm.
The engine delivers its power through to the wheels via a 5 speed manual gearbox.
It weighs a claimed 800 kg at the kerb.
Maximum speed claimed is 200 km/h, which is 124 mph.
Full specs
|
|
|||
| Carrocería | |||
|---|---|---|---|
| Carrocería | 2 seater fixed-head coupé | ||
| Número de puertas | 2 | ||
| diseñado por | |||
| Dimensiones y pesos | |||
| Distancia entre ejes | 2420 | 95.3 | |
| Vía delantera | 1400 | 55.1 | |
| Vía trasera | 1440 | 56.7 | |
| Longitud | 4214 | 165.9 | |
| Ancho | 1700 | 66.9 | |
| Altura | 1135 | 44.7 | |
| Despeje del suelo | 160 | 6.3 | |
| Relación Largo:Dist.entre ejes | 1.74 | ||
| Peso en vacío | 800 kg | 1764 | |
| Distribución del peso (% adelante) | 44% front | ||
| Capacità serbatoio | 50 litres | 11 [13.2] UK [US] gal. | |
| Aerodinámica | |||
| Coeficiente de penetración | |||
| Superficie frontal | |||
| SCx | |||
| Tren motriz | |||
| naturally aspirated petrol | |||
| Fabricante del motor | Lancia | ||
| Código de motor | 820.403 | ||
| Número de cilindros | Flat 4 | ||
| Cilindrada | 2 litre 1991 cc (121.498 cu in) |
||
| Diámetro × Carrera | 89 × 80 mm
3.5 × 3.15 in |
||
| Relación diámetro/carrera | 1.11 | ||
| Distribución | double overhead camshaft (DOHC)
2 válvulas por cilindro 8 Total de válvulas |
||
| Potencia nominal (DIN) |
125 PS (123 bhp) (92 kW) a 5800 rpm |
||
| Par motor máximo (DIN) |
172 Nm (127 ft·lb) (17.5 kgm) a 3700 rpm |
||
| Potencia específica (DIN) |
46.1 kW/litre 62.6 ps/litre 61.8 bhp/litre 1.01 bhp/cu in |
||
(DIN) |
86.39 Nm/litre
1.04 ft·lb/cu3 |
||
| Materiales de block / culata | |||
| Lubricación | Cárter húmedo | ||
| Relación de compresión | 9.2:1 | ||
| Alimentación | Bosch fuel injection | ||
| 1085.6 kPa (157.5 psi) | |||
| Maximum RPM | |||
| Casquillos de cigüeñal | 3 | ||
| Engine coolant | Water | ||
| 497.75 cc | |||
| Aspiración | Normal | ||
| Compresor | N/A | ||
| intercooler | None | ||
| catalizador | N | ||
| Rendimiento | |||
| 0-80km/h | |||
| 0-60mph | |||
| 0-100km/h | |||
| 0-160km/h | |||
| 0-400m | |||
| 0-1000m | |||
| Velocidad máxima | 200 km/h (124 mph) | ||
| Power-to-weight ratio | Higher is better 155.89 PS/tonne (1000 kg) 0.16 PS/kg 114.65 kW/tonne (1000 kg) 0.11 kW/kg 153.75 bhp/tonne (1000 kg) 0.15 bhp/kg 0.07 bhp/lb |
||
| Weight-to-power ratio | Lower is better 8.72 kg/kW 14.57 lb/bhp |
||
| Consumos | |||
| Consumo de combustible | |||
| universal fuel consumption (calculated from the above) | |||
| litres/100km | |||
| km/litre | |||
| UK MPG | |||
| US MPG | |||
| Emisiones de CO2 | |||
| Carfolio Calculated CO2 ? | |||
| VED band (UK) | |||
| CO2 Effizienz (DE) | |||
| Chasis | |||
| Ubicación del motor | mid | ||
| Engine layout | longitudinal | ||
| Tracción | rear wheel drive | ||
| Alimentación | N/A | ||
| Dirección, tipo | |||
| turns lock-to-lock | |||
| Turning circle | |||
| Suspensión delantera | |||
| Suspensión trasera | |||
| Ruedas delante | 6J x 14 | ||
| Ruedas detrás | 7½J x 14 | ||
| Neumáticos delante | 185/70 VR 14 | ||
| Neumáticos detrás | 205/70 VR 14 | ||
| Brakes F/R | Di/Di-S | ||
| Front brake diameter | |||
| Rear brake diameter | |||
| Braked area | |||
| Transmisión | 5 speed manual | ||
| Eje trasero desmultiplicación | 1 | ||
| Desmultiplicación grupo cónico | 3.55 | ||
| General | |||
| Carfolio.com ID | 228811 | ||
| Unidades producidas | |||
| Model code | |||
| Tipo 7102 | |||
| RAC rating | 19.6 | ||
| Insurance classification | No information available | ||
| Tax band | No information available | ||
|
1972 Francis Lombardi FL 1 added 2011-01-08. Last modified 2020-02-02. |
|||