The Abarth 1300 Scorpione Coupé is a coupé designed by Francis Lombardi with 2 doors and a rear mounted engine which supplies the power through the rear wheels.
Powering the Abarth 1300 Scorpione Coupé is an overhead valve, 1.3 litre naturally aspirated 4 cylinder motor, with 2 valves per cylinder that develops power and torque figures of 73 bhp (74 PS/54 kW) at 6000 rpm and 108 N·m (80 lb·ft/11 kgm) at 3000 rpm respectively.
The engine drives the wheels via a 4 speed manual 'box.
Stated kerb weight is 670 kg.
Maximum speed quoted is 185 km/h or 115 mph.
Full specs
|
|
|||
| Carrosserie | |||
|---|---|---|---|
| Carrosserie | 2 seater fixed-head coupé | ||
| Nombre de portes | 2 | ||
| Designer | Francis Lombardi | ||
| Dimensions et poids | |||
| Empattement | 2045 | 80.5 | |
| Voies AV | 1254 | 49.4 | |
| Voies AR | 1240 | 48.8 | |
| Longueur | 3710 | 146.1 | |
| Largeur | 1495 | 58.9 | |
| Hauteur | 1050 | 41.3 | |
| Garde au sol | |||
| 1.81 | |||
| Poids avec pleins | 670 kg | 1477 | |
| Répartition poids AV | |||
| Réservoir à essence | 29.5 litres | 6.5 [7.8] UK [US] gal. | |
| Caractéristiques aérodynamique | |||
| Coefficient de pénétration | |||
| maître-couple | |||
| SCx | |||
| naturally aspirated petrol | |||
| Constructeur du moteur | Fiat | ||
| Type moteur | |||
| Cylinders | Straight 4 | ||
| Cylindrée | 1.3 litre 1280 cc (78.11 cu in) |
||
| Alésage × Course | 75.5 × 71.5 mm
2.97 × 2.81 in |
||
| Rapport alésage / course | 1.06 | ||
| Distribution | overhead valve (OHV)
2 Soupapes par cylindre 8 Total vannes |
||
| Puissance maximale | 74 PS (73 bhp) (54 kW) à 6000 tr/mn |
||
| Couple maximale | 108 Nm (80 ft·lb) (11 kgm) à 3000 tr/mn |
||
| Specific output | 42.5 kW/litre 57.8 ps/litre 57 bhp/litre 0.93 bhp/cu in |
||
|
84.38 Nm/litre
1.02 ft·lb/cu3 |
|||
| Construction | |||
| Lubrification | Carter humide | ||
| Taux de compression | 10.5:1 | ||
| Carburant | 1 So 32 PHH carb | ||
| bmep (brake mean effective pressure) | 1060.3 kPa (153.8 psi) | ||
| Régime maximal | |||
| Nombre de paliers de vilebrequin | |||
| Refroidissement | Water | ||
| Cylindrée Unitaire | 320 cc | ||
| Aspiration | Normal | ||
| Compressor | N/A | ||
| Intercooler | None | ||
| Catalyseur | N | ||
| Performances | |||
| 0-80km/h | |||
| 0-60mph | 12 s | ||
| 0-100km/h | |||
| 0-160km/h | |||
| 0-400m | |||
| 0-1000m | |||
| Vitesse | 185 km/h (115 mph) | ||
| Power-to-weight ratio | Higher is better 110.47 PS/tonne (1000 kg) 0.11 PS/kg 81.25 kW/tonne (1000 kg) 0.08 kW/kg 108.96 bhp/tonne (1000 kg) 0.11 bhp/kg 0.05 bhp/lb |
||
| Weight-to-power ratio | Lower is better 12.31 kg/kW 20.56 lb/bhp |
||
| Consommation | |||
| Consommation | |||
| universal fuel consumption (calculated from the above) | |||
| litres/100km | |||
| km/litre | |||
| UK MPG | |||
| US MPG | |||
| Emissions de CO₂ | |||
| Carfolio Calculated CO2 ? | |||
| VED band (UK) | |||
| CO2 Effizienz (DE) | |||
| Châssis | |||
| Emplacement de moteur | rear | ||
| Engine layout | longitudinal | ||
| Traction | rear wheel drive | ||
| Répartition du couple | N/A | ||
| Direction | |||
| turns lock-to-lock | |||
| Turning circle | |||
| Suspension AV | I.CS. | ||
| Suspension AR | I.CS. | ||
| Roues AV | |||
| Roues AR | |||
| Pneumatiques AV | |||
| Pneumatiques AR | |||
| Freins AV/AR | Di/Di | ||
| Diamètre des freins AV | |||
| Diamètre des freins AR | |||
| Braked area | |||
| Transmission | 4 speed manual | ||
| Rapport de démultiplication supérieure | |||
| Rapport de pont | 3.89 | ||
| Généralités | |||
| Carfolio.com ID | 15147 | ||
| Production total | |||
| Type mines | |||
| RAC rating | 14.1 | ||
| Insurance classification | No information available | ||
| Tax band | No information available | ||
|
1968 Abarth 1300 Scorpione Coupé added before December 1995. Last modified 2024-10-29. |
|||