The Seat Toledo 2.0 GTi is a front wheel drive road car, with its engine placed in the front, and a 4 door saloon bodyshell.
Powering the Seat Toledo 2.0 GTi is a single overhead camshaft, 2 litre naturally aspirated 4 cylinder motor, with 2 valves per cylinder that provides power and torque figures of 115 bhp (117 PS/86 kW) at 5400 rpm and 166 N·m (122 lb·ft/16.9 kgm) at 3200 rpm respectively.
The power is supplied to the wheels by means of a 5 speed manual transmission.
Claimed weight at the kerb is 1030 kg.
Top stated speed is 198 km/h (123 mph).
Full specs
|
|
|||
| Carrocería | |||
|---|---|---|---|
| Carrocería | 4/5 seater sedan/saloon | ||
| Número de puertas | 4 | ||
| diseñado por | |||
| Dimensiones y pesos | |||
| Distancia entre ejes | 2474 | 97.4 | |
| Vía delantera | 1429 | 56.3 | |
| Vía trasera | 1422 | 56 | |
| Longitud | 4318 | 170 | |
| Ancho | 1651 | 65 | |
| Altura | 1420 | 55.9 | |
| Despeje del suelo | |||
| Relación Largo:Dist.entre ejes | 1.75 | ||
| Peso en vacío | 1030 kg | 2271 | |
| Distribución del peso (% adelante) | |||
| Capacità serbatoio | 55 litres | 12.1 [14.5] UK [US] gal. | |
| Aerodinámica | |||
| Coeficiente de penetración | 0.31 | ||
| Superficie frontal | |||
| SCx | |||
| Tren motriz | |||
| naturally aspirated petrol | |||
| Fabricante del motor | Volkswagen | ||
| Código de motor | |||
| Número de cilindros | Straight 4 | ||
| Cilindrada | 2 litre 1984 cc (121.071 cu in) |
||
| Diámetro × Carrera | 82.5 × 92.8 mm
3.25 × 3.65 in |
||
| Relación diámetro/carrera | 0.89 | ||
| Distribución | single overhead camshaft (SOHC)
2 válvulas por cilindro 8 Total de válvulas |
||
| Potencia nominal (DIN) |
117 PS (115 bhp) (86 kW) a 5400 rpm |
||
| Par motor máximo (DIN) |
166 Nm (122 ft·lb) (16.9 kgm) a 3200 rpm |
||
| Potencia específica (DIN) |
43.2 kW/litre 58.8 ps/litre 58 bhp/litre 0.95 bhp/cu in |
||
(DIN) |
83.67 Nm/litre
1.01 ft·lb/cu3 |
||
| Materiales de block / culata | |||
| Lubricación | |||
| Relación de compresión | 10.4:1 | ||
| Alimentación | Bo Digifant fuel inj. | ||
| 1051.4 kPa (152.5 psi) | |||
| Maximum RPM | |||
| Casquillos de cigüeñal | 5 | ||
| Engine coolant | Water | ||
| 496 cc | |||
| Aspiración | Normal | ||
| Compresor | N/A | ||
| intercooler | None | ||
| catalizador | N | ||
| Rendimiento | |||
| 0-80km/h | |||
| 0-60mph | 10.6 s | ||
| 0-100km/h | |||
| 0-160km/h | |||
| 0-400m | 17.9 s | ||
| 0-1000m | |||
| Velocidad máxima | 198 km/h (123 mph) | ||
| Power-to-weight ratio | Higher is better 113.2 PS/tonne (1000 kg) 0.11 PS/kg 83.26 kW/tonne (1000 kg) 0.08 kW/kg 111.65 bhp/tonne (1000 kg) 0.11 bhp/kg 0.05 bhp/lb |
||
| Weight-to-power ratio | Lower is better 12.01 kg/kW 20.06 lb/bhp |
||
| Consumos | |||
| Consumo de combustible | |||
| universal fuel consumption (calculated from the above) | |||
| litres/100km | |||
| km/litre | |||
| UK MPG | |||
| US MPG | |||
| Emisiones de CO2 | |||
| Carfolio Calculated CO2 ? | |||
| VED band (UK) | |||
| CO2 Effizienz (DE) | |||
| Chasis | |||
| Ubicación del motor | front | ||
| Engine layout | transverse | ||
| Tracción | front wheel drive | ||
| Alimentación | N/A | ||
| Dirección, tipo | |||
| turns lock-to-lock | |||
| Turning circle | |||
| Suspensión delantera | I.MS.CS.ARB. | ||
| Suspensión trasera | TB.CS.ARB. | ||
| Ruedas delante | |||
| Ruedas detrás | |||
| Neumáticos delante | |||
| Neumáticos detrás | |||
| Brakes F/R | |||
| Front brake diameter | |||
| Rear brake diameter | |||
| Braked area | |||
| Transmisión | 5 speed manual | ||
| Eje trasero desmultiplicación | 0.81 | ||
| Desmultiplicación grupo cónico | 3.67 | ||
| General | |||
| Carfolio.com ID | 30822 | ||
| Unidades producidas | |||
| Model code | |||
| RAC rating | 16.9 | ||
| Insurance classification | No information available | ||
| Tax band | No information available | ||
|
1991 Seat Toledo 2.0 GTi added before December 1995. Last modified 2013-02-28. |
|||