The Fury III is a rear wheel drive saloon (sedan) motor vehicle with a front located engine, from Plymouth.
The Fury III forms part of Plymouth's 4P2 series of cars.
Its engine is a naturally aspirated petrol, 7.2 litre, overhead valve 90 degree V 8 cylinder with 2 valves per cylinder. This powerplant develops 220 bhp (223 PS/164 kW) of power at 4000 rpm, and maximum torque of 468 N·m (345 lb·ft/47.7 kgm) at 3200 rpm.
The engine transmits power to the wheels through a 3 speed automatic gearbox.
Full specs
|
|
Applicable to the Californian, USA domestic market(s). | ||
| bodywork | |||
|---|---|---|---|
| Body type | 4/5 seater sedan/saloon | ||
| Number of doors | 4 | ||
| Designer | |||
| dimensions & weights | |||
| Wheelbase | 3099 mm | 122 inches | |
| Track/tread (front) | 1626 mm | 64 inches | |
| Track/tread (rear) | 1618 mm | 63.7 inches | |
| Length | 5585 mm | 219.9 inches | |
| Width | 2029 mm | 79.9 inches | |
| Height | 1392 mm | 54.8 inches | |
| Ground clearance | |||
| length:wheelbase ratio | 1.8 | ||
| Kerb weight | |||
| Weight distribution | |||
| fuel tank capacity | 94.7 litres | 20.8 [25] UK [US] gal. | |
| aerodynamics | |||
| Drag coefficient | |||
| Frontal area | |||
| CdA | |||
| Powertrain | |||
| engine type | naturally aspirated petrol | ||
| Engine manufacturer | Chrysler | ||
| Engine code | |||
| Cylinders | V 8 in 90° vee | ||
| Capacity | 7.2 litre 7206 cc (439.737 cu in) |
||
| Bore × Stroke | 109.7 × 95.3 mm
4.32 × 3.75 in |
||
| Bore/stroke ratio | 1.15 | ||
| Valve gear | overhead valve (OHV)
2 valves per cylinder 16 valves in total |
||
| maximum power output (net) |
223 PS (220 bhp) (164 kW) at 4000 rpm |
||
| maximum torque (net) |
468 Nm (345 ft·lb) (47.7 kgm) at 3200 rpm |
||
| Specific output (net) |
22.8 kW/litre 31 ps/litre 30.5 bhp/litre 0.5 bhp/cu in |
||
| Specific torque (net) |
64.95 Nm/litre
0.78 ft·lb/cu3 |
||
| Engine construction | cast iron block & heads | ||
| Lubrication | wet sumped | ||
| compression ratio | 8.2:1 | ||
| Fuel system | 1 carburettor | ||
| bmep (brake mean effective pressure) | 816.1 kPa (118.4 psi) | ||
| Maximum RPM | |||
| crankshaft bearings | 5 | ||
| Engine coolant | Water | ||
| Unitary capacity | 900.75 cc | ||
| Aspiration | Normal | ||
| Compressor | N/A | ||
| Intercooler | None | ||
| Catalytic converter | |||
| performance | |||
| Acceleration 0-80km/h (50mph) | |||
| Acceleration 0-60mph | |||
| Acceleration 0-100km/h | |||
| Acceleration 0-160km/h (100mph) | |||
| Standing quarter-mile | |||
| Standing kilometre | |||
| Maximum speed | |||
| Power-to-weight ratio | |||
| Weight-to-power ratio | |||
| fuel consumption | |||
| Fuel consumption | |||
| universal fuel consumption (calculated from the above) | |||
| litres/100km | |||
| km/litre | |||
| UK MPG | |||
| US MPG | |||
| Carbon dioxide emissions | |||
| Carfolio Calculated CO2 ? | |||
| VED band (UK) | |||
| CO2 Effizienz (DE) | |||
| chassis | |||
| Engine position | front | ||
| Engine layout | longitudinal | ||
| Drive wheels | rear wheel drive | ||
| Torque split | N/A | ||
| Steering | |||
| turns lock-to-lock | 3.500 | ||
| Turning circle | |||
| Front suspension | |||
| Rear suspension | |||
| Wheel size front | 5½JJ x 15 | ||
| Wheel size rear | 5½JJ x 15 | ||
| Tyres front | G78 x 15 | ||
| Tyres rear | G78 x 15 | ||
| Brakes F/R | VeDi/Dr-S | ||
| Front brake diameter | 294 mm | ||
| Rear brake diameter | 279 mm | ||
| Braked area | |||
| Gearbox | 3 speed automatic | ||
| Top gear ratio | 1 | ||
| Final drive ratio | 2.71 | ||
| general | |||
| Carfolio.com ID | 519948 | ||
| Production total | |||
| Model code | PH41 | ||
| Model family | 4P2 | ||
| RAC rating | 59.7 | ||
| Insurance classification | No information available | ||
| Tax band | No information available | ||
|
1974 Plymouth Fury III added 2017-06-17. Last modified 2020-03-16. |
|||