This car has a 2 door saloon (sedan) body style with a front mounted engine powering the rear wheels.
The Plymouth Fury II is one of the FP1 range of cars from Plymouth.
It is powered by a naturally aspirated engine of 3.7 litre capacity. This powerplant features overhead valve valve gear, 6 cylinder layout, and 2 valves per cylinder. It develops 145 bhp (147 PS/108 kW) of power at 4000 rpm, and maximum torque of 292 N·m (215 lb·ft/29.8 kgm) at 2400 rpm.
This power is supplied to the wheels via a 3 speed manual gearbox.
Full specs
|
|
|||
| bodywork | |||
|---|---|---|---|
| Body type | 4/5 seater sedan/saloon | ||
| Number of doors | 2 | ||
| Designer | |||
| dimensions & weights | |||
| Wheelbase | 3048 mm | 120 inches | |
| Track/tread (front) | 1577 mm | 62.1 inches | |
| Track/tread (rear) | 1575 mm | 62 inches | |
| Length | 5458 mm | 214.9 inches | |
| Width | 2019 mm | 79.5 inches | |
| Height | 1382 mm | 54.4 inches | |
| Ground clearance | 117 mm | 4.6 inches | |
| length:wheelbase ratio | 1.79 | ||
| Kerb weight | |||
| Weight distribution | |||
| fuel tank capacity | 90.9 litres | 20 [24] UK [US] gal. | |
| aerodynamics | |||
| Drag coefficient | |||
| Frontal area | |||
| CdA | |||
| Powertrain | |||
| engine type | naturally aspirated petrol | ||
| Engine manufacturer | Chrysler | ||
| Engine code | |||
| Cylinders | Straight 6 | ||
| Capacity | 3.7 litre 3678 cc (224.445 cu in) |
||
| Bore × Stroke | 86.36 × 104.65 mm
3.4 × 4.12 in |
||
| Bore/stroke ratio | 0.83 | ||
| Valve gear | overhead valve (OHV)
2 valves per cylinder 12 valves in total |
||
| maximum power output (gross) |
147 PS (145 bhp) (108 kW) at 4000 rpm |
||
| maximum torque (gross) |
292 Nm (215 ft·lb) (29.8 kgm) at 2400 rpm |
||
| Specific output (gross) |
29.4 kW/litre 40 ps/litre 39.4 bhp/litre 0.65 bhp/cu in |
||
| Specific torque (gross) |
79.39 Nm/litre
0.96 ft·lb/cu3 |
||
| Engine construction | cast iron block & head | ||
| Lubrication | wet sumped | ||
| compression ratio | 8.4:1 | ||
| Fuel system | 1 Holley R-4351A carburettor | ||
| bmep (brake mean effective pressure) | 997.7 kPa (144.7 psi) | ||
| Maximum RPM | |||
| crankshaft bearings | |||
| Engine coolant | Water | ||
| Unitary capacity | 613 cc | ||
| Aspiration | Normal | ||
| Compressor | N/A | ||
| Intercooler | None | ||
| Catalytic converter | N | ||
| performance | |||
| Acceleration 0-80km/h (50mph) | |||
| Acceleration 0-60mph | |||
| Acceleration 0-100km/h | |||
| Acceleration 0-160km/h (100mph) | |||
| Standing quarter-mile | |||
| Standing kilometre | |||
| Maximum speed | |||
| Power-to-weight ratio | |||
| Weight-to-power ratio | |||
| fuel consumption | |||
| Fuel consumption | |||
| universal fuel consumption (calculated from the above) | |||
| litres/100km | |||
| km/litre | |||
| UK MPG | |||
| US MPG | |||
| Carbon dioxide emissions | |||
| Carfolio Calculated CO2 ? | |||
| VED band (UK) | |||
| CO2 Effizienz (DE) | |||
| chassis | |||
| Engine position | front | ||
| Engine layout | longitudinal | ||
| Drive wheels | rear wheel drive | ||
| Torque split | N/A | ||
| Steering | |||
| turns lock-to-lock | |||
| Turning circle | |||
| Front suspension | |||
| Rear suspension | |||
| Wheel size front | 5½JJ x 15 | ||
| Wheel size rear | 5½JJ x 15 | ||
| Tyres front | F78 x 15 | ||
| Tyres rear | F78 x 15 | ||
| Brakes F/R | Dr/Dr | ||
| Front brake diameter | 279 mm | ||
| Rear brake diameter | 279 mm | ||
| Braked area | |||
| Gearbox | 3 speed manual | ||
| Top gear ratio | 1 | ||
| Final drive ratio | 3.23 | ||
| general | |||
| Carfolio.com ID | 353254 | ||
| Production total | |||
| Model code | PL21 | ||
| Model family | FP1 | ||
| RAC rating | 27.7 | ||
| Insurance classification | No information available | ||
| Tax band | No information available | ||
|
1970 Plymouth Fury II added 2013-08-14. Last modified 2020-02-02. |
|||