The Plymouth Fury I is a rear wheel drive road car, with its engine placed in the front, and a 2 door saloon (sedan) bodyshell.
The Plymouth Fury I belongs to the FP2 range of cars from Plymouth.
Power is supplied by an overhead valve, 6.3 litre naturally aspirated 8 cylinder powerplant, with 2 valves per cylinder that develops power and torque figures of 330 bhp (335 PS/246 kW) at 5000 rpm and 576 N·m (425 lb·ft/58.7 kgm) at 3200 rpm respectively.
A 3 speed automatic gearbox delivers the power to the driven wheels.
Full specs
|
|
|||
| Carrocería | |||
|---|---|---|---|
| Carrocería | 4/5 seater sedan/saloon | ||
| Número de puertas | 2 | ||
| diseñado por | |||
| Dimensiones y pesos | |||
| Distancia entre ejes | 3048 | 120 | |
| Vía delantera | 1577 | 62.1 | |
| Vía trasera | 1575 | 62 | |
| Longitud | 5458 | 214.9 | |
| Ancho | 2019 | 79.5 | |
| Altura | 1382 | 54.4 | |
| Despeje del suelo | 117 | 4.6 | |
| Relación Largo:Dist.entre ejes | 1.79 | ||
| Peso en vacío | |||
| Distribución del peso (% adelante) | |||
| Capacità serbatoio | 90.9 litres | 20 [24] UK [US] gal. | |
| Aerodinámica | |||
| Coeficiente de penetración | |||
| Superficie frontal | |||
| SCx | |||
| Tren motriz | |||
| naturally aspirated petrol | |||
| Fabricante del motor | Chrysler | ||
| Código de motor | |||
| Número de cilindros | V 8 in 90° vee | ||
| Cilindrada | 6.3 litre 6286 cc (383.595 cu in) |
||
| Diámetro × Carrera | 107.95 × 85.85 mm
4.25 × 3.38 in |
||
| Relación diámetro/carrera | 1.26 | ||
| Distribución | overhead valve (OHV)
2 válvulas por cilindro 16 Total de válvulas |
||
| Potencia nominal (gross) |
335 PS (330 bhp) (246 kW) a 5000 rpm |
||
| Par motor máximo (gross) |
576 Nm (425 ft·lb) (58.7 kgm) a 3200 rpm |
||
| Potencia específica (gross) |
39.1 kW/litre 53.2 ps/litre 52.5 bhp/litre 0.86 bhp/cu in |
||
(gross) |
91.63 Nm/litre
1.11 ft·lb/cu3 |
||
| Materiales de block / culata | cast iron block & head | ||
| Lubricación | Cárter húmedo | ||
| Relación de compresión | 9.5:1 | ||
| Alimentación | 1 Carter carburettor | ||
| 1151.5 kPa (167 psi) | |||
| Maximum RPM | |||
| Casquillos de cigüeñal | 5 | ||
| Engine coolant | Water | ||
| 785.75 cc | |||
| Aspiración | Normal | ||
| Compresor | N/A | ||
| intercooler | None | ||
| catalizador | N | ||
| Rendimiento | |||
| 0-80km/h | |||
| 0-60mph | |||
| 0-100km/h | |||
| 0-160km/h | |||
| 0-400m | |||
| 0-1000m | |||
| Velocidad máxima | |||
| Power-to-weight ratio | |||
| Weight-to-power ratio | |||
| Consumos | |||
| Consumo de combustible | |||
| universal fuel consumption (calculated from the above) | |||
| litres/100km | |||
| km/litre | |||
| UK MPG | |||
| US MPG | |||
| Emisiones de CO2 | |||
| Carfolio Calculated CO2 ? | |||
| VED band (UK) | |||
| CO2 Effizienz (DE) | |||
| Chasis | |||
| Ubicación del motor | front | ||
| Engine layout | longitudinal | ||
| Tracción | rear wheel drive | ||
| Alimentación | N/A | ||
| Dirección, tipo | |||
| turns lock-to-lock | |||
| Turning circle | |||
| Suspensión delantera | |||
| Suspensión trasera | |||
| Ruedas delante | 5½JJ x 15 | ||
| Ruedas detrás | 5½JJ x 15 | ||
| Neumáticos delante | F78 x 15 | ||
| Neumáticos detrás | F78 x 15 | ||
| Brakes F/R | Dr/Dr | ||
| Front brake diameter | 279 mm | ||
| Rear brake diameter | 279 mm | ||
| Braked area | |||
| Transmisión | 3 speed automatic | ||
| Eje trasero desmultiplicación | 1 | ||
| Desmultiplicación grupo cónico | 3.23 | ||
| General | |||
| Carfolio.com ID | 352440 | ||
| Unidades producidas | |||
| Model code | PE21 | ||
| FP2 | |||
| RAC rating | 57.8 | ||
| Insurance classification | No information available | ||
| Tax band | No information available | ||
|
1970 Plymouth Fury I added 2013-08-11. Last modified 2020-02-02. |
|||