The Opel Monza 2.8 is a rear wheel drive automobile, with the engine located in the front, and a 2 door coupé body.
Power is supplied by a single overhead camshaft, 2.8 litre naturally aspirated 6 cylinder motor, with 2 valves per cylinder that provides power and torque figures of 138 bhp (140 PS/103 kW) at 5200 rpm and 218 N·m (161 lb·ft/22.2 kgm) at 3400 rpm respectively.
A 3 speed automatic transmission transfers the power to the wheels.
The quoted weight at the kerb is 1375 kg.
Maximum claimed speed is 190 km/h (118 mph).
Full specs
|
|
|||
| Carrocería | |||
|---|---|---|---|
| Carrocería | 2+2 seater fixed-head coupé | ||
| Número de puertas | 2 | ||
| diseñado por | |||
| Dimensiones y pesos | |||
| Distancia entre ejes | 2668 | 105 | |
| Vía delantera | 1443 | 56.8 | |
| Vía trasera | 1472 | 58 | |
| Longitud | 4692 | 184.7 | |
| Ancho | 1734 | 68.3 | |
| Altura | 1380 | 54.3 | |
| Despeje del suelo | 140 | 5.5 | |
| Relación Largo:Dist.entre ejes | 1.76 | ||
| Peso en vacío | 1375 kg | 3031 | |
| Distribución del peso (% adelante) | |||
| Capacità serbatoio | 70 litres | 15.4 [18.5] UK [US] gal. | |
| Aerodinámica | |||
| Coeficiente de penetración | |||
| Superficie frontal | |||
| SCx | |||
| Tren motriz | |||
| naturally aspirated petrol | |||
| Fabricante del motor | Opel | ||
| Código de motor | |||
| Número de cilindros | Straight 6 | ||
| Cilindrada | 2.8 litre 2784 cc (169.89 cu in) |
||
| Diámetro × Carrera | 92 × 69.8 mm
3.62 × 2.75 in |
||
| Relación diámetro/carrera | 1.32 | ||
| Distribución | single overhead camshaft (SOHC)
2 válvulas por cilindro 12 Total de válvulas |
||
| Potencia nominal (DIN) |
140 PS (138 bhp) (103 kW) a 5200 rpm |
||
| Par motor máximo (DIN) |
218 Nm (161 ft·lb) (22.2 kgm) a 3400 rpm |
||
| Potencia específica (DIN) |
37 kW/litre 50.3 ps/litre 49.6 bhp/litre 0.81 bhp/cu in |
||
(DIN) |
78.3 Nm/litre
0.95 ft·lb/cu3 |
||
| Materiales de block / culata | cast iron block & head | ||
| Lubricación | Cárter húmedo | ||
| Relación de compresión | 9:1 | ||
| Alimentación | 1 DVG 4 A1 carburettor | ||
| 984 kPa (142.7 psi) | |||
| Maximum RPM | |||
| Casquillos de cigüeñal | 7 | ||
| Engine coolant | Water | ||
| 464 cc | |||
| Aspiración | Normal | ||
| Compresor | N/A | ||
| intercooler | None | ||
| catalizador | N | ||
| Rendimiento | |||
| 0-80km/h | |||
| 0-60mph | |||
| 0-100km/h | 12 s | ||
| 0-160km/h | |||
| 0-400m | |||
| 0-1000m | |||
| Velocidad máxima | 190 km/h (118 mph) | ||
| Power-to-weight ratio | Higher is better 101.76 PS/tonne (1000 kg) 0.1 PS/kg 74.84 kW/tonne (1000 kg) 0.07 kW/kg 100.36 bhp/tonne (1000 kg) 0.1 bhp/kg 0.04 bhp/lb |
||
| Weight-to-power ratio | Lower is better 13.36 kg/kW 22.32 lb/bhp |
||
| Consumos | |||
| Consumo de combustible | |||
| universal fuel consumption (calculated from the above) | |||
| litres/100km | |||
| km/litre | |||
| UK MPG | |||
| US MPG | |||
| Emisiones de CO2 | |||
| Carfolio Calculated CO2 ? | |||
| VED band (UK) | |||
| CO2 Effizienz (DE) | |||
| Chasis | |||
| Ubicación del motor | front | ||
| Engine layout | longitudinal | ||
| Tracción | rear wheel drive | ||
| Alimentación | N/A | ||
| Dirección, tipo | |||
| turns lock-to-lock | 4.000 | ||
| Turning circle | 10.80 m | ||
| Suspensión delantera | I.MS.TrailLi.CS.ARB. | ||
| Suspensión trasera | I.STA.CS.ARB. | ||
| Ruedas delante | 6J x 14 | ||
| Ruedas detrás | 6J x 14 | ||
| Neumáticos delante | 175 R 14 88H | ||
| Neumáticos detrás | 175 R 14 88H | ||
| Brakes F/R | Di/Di-S | ||
| Front brake diameter | |||
| Rear brake diameter | |||
| Braked area | |||
| Transmisión | 3 speed automatic | ||
| Eje trasero desmultiplicación | 1 | ||
| Desmultiplicación grupo cónico | |||
| General | |||
| Carfolio.com ID | 146322 | ||
| Unidades producidas | |||
| Model code | |||
| RAC rating | 31.5 | ||
| Insurance classification | No information available | ||
| Tax band | No information available | ||
|
1979 Opel Monza 2.8 Automatic added 2006-09-05. Last modified 2013-02-28. |
|||
