The Lincoln Mark VII Bill Blass is a rear wheel drive car, with the engine located in the front, and a 2 door coupé body.
The Lincoln Mark VII Bill Blass's engine is a naturally aspirated petrol, 4.9 litre, overhead valve 90 degree V 8 cylinder with 2 valves per cylinder. In this application it develops 225 bhp (228 PS/168 kW) of power at 3200 rpm, and maximum torque of 407 N·m (300 lb·ft/41.5 kgm) at 2000 rpm.
The engine delivers its power through to the wheels via a 4 speed automatic 'box.
Its claimed weight at the kerb is 1698 kg.
Full specs
|
|
|||
| bodywork | |||
|---|---|---|---|
| Body type | 4/5 seater fixed-head coupé | ||
| Number of doors | 2 | ||
| Designer | |||
| dimensions & weights | |||
| Wheelbase | 2756 mm | 108.5 inches | |
| Track/tread (front) | 1483 mm | 58.4 inches | |
| Track/tread (rear) | 1499 mm | 59 inches | |
| Length | 5151 mm | 202.8 inches | |
| Width | 1801 mm | 70.9 inches | |
| Height | 1377 mm | 54.2 inches | |
| Ground clearance | |||
| length:wheelbase ratio | 1.87 | ||
| Kerb weight | 1698 kg | 3743 lb | |
| Weight distribution | |||
| fuel tank capacity | 83.7 litres | 18.4 [22.1] UK [US] gal. | |
| aerodynamics | |||
| Drag coefficient | |||
| Frontal area | |||
| CdA | |||
| Powertrain | |||
| engine type | naturally aspirated petrol | ||
| Engine manufacturer | Ford | ||
| Engine code | |||
| Cylinders | V 8 in 90° vee | ||
| Capacity | 4.9 litre 4942 cc (301.579 cu in) |
||
| Bore × Stroke | 101.6 × 76.2 mm
4 × 3 in |
||
| Bore/stroke ratio | 1.33 | ||
| Valve gear | overhead valve (OHV)
2 valves per cylinder 16 valves in total |
||
| maximum power output (SAE net) |
228 PS (225 bhp) (168 kW) at 3200 rpm |
||
| maximum torque (SAE net) |
407 Nm (300 ft·lb) (41.5 kgm) at 2000 rpm |
||
| Specific output (SAE net) |
34 kW/litre 46.2 ps/litre 45.5 bhp/litre 0.75 bhp/cu in |
||
| Specific torque (SAE net) |
82.36 Nm/litre
1 ft·lb/cu3 |
||
| Engine construction | |||
| Lubrication | wet sumped | ||
| compression ratio | 9:1 | ||
| Fuel system | Ford EEC-IV fuel injection | ||
| bmep (brake mean effective pressure) | 1034.9 kPa (150.1 psi) | ||
| Maximum RPM | |||
| crankshaft bearings | 5 | ||
| Engine coolant | Water | ||
| Unitary capacity | 617.75 cc | ||
| Aspiration | Normal | ||
| Compressor | N/A | ||
| Intercooler | None | ||
| Catalytic converter | Y | ||
| performance | |||
| Acceleration 0-80km/h (50mph) | |||
| Acceleration 0-60mph | |||
| Acceleration 0-100km/h | |||
| Acceleration 0-160km/h (100mph) | |||
| Standing quarter-mile | |||
| Standing kilometre | |||
| Maximum speed | |||
| Power-to-weight ratio | Higher is better 134.35 PS/tonne (1000 kg) 0.13 PS/kg 98.81 kW/tonne (1000 kg) 0.1 kW/kg 132.51 bhp/tonne (1000 kg) 0.13 bhp/kg 0.06 bhp/lb |
||
| Weight-to-power ratio | Lower is better 10.12 kg/kW 16.9 lb/bhp |
||
| fuel consumption | |||
| Fuel consumption | |||
| universal fuel consumption (calculated from the above) | |||
| litres/100km | |||
| km/litre | |||
| UK MPG | |||
| US MPG | |||
| Carbon dioxide emissions | |||
| Carfolio Calculated CO2 ? | |||
| VED band (UK) | |||
| CO2 Effizienz (DE) | |||
| chassis | |||
| Engine position | front | ||
| Engine layout | longitudinal | ||
| Drive wheels | rear wheel drive | ||
| Torque split | N/A | ||
| Steering | |||
| turns lock-to-lock | 3.050 | ||
| Turning circle | |||
| Front suspension | |||
| Rear suspension | |||
| Wheel size front | 6.0 x 15 | ||
| Wheel size rear | 6.0 x 15 | ||
| Tyres front | P215/70 R 15 | ||
| Tyres rear | P215/70 R 15 | ||
| Brakes F/R | VeDi/VeDi-S | ||
| Front brake diameter | 277 mm | ||
| Rear brake diameter | 287 mm | ||
| Braked area | |||
| Gearbox | 4 speed automatic | ||
| Top gear ratio | 0.67 | ||
| Final drive ratio | 3.08 | ||
| general | |||
| Carfolio.com ID | 683056 | ||
| Production total | |||
| Model code | |||
| RAC rating | 51.2 | ||
| Insurance classification | No information available | ||
| Tax band | No information available | ||
|
1989 Lincoln Mark VII Bill Blass added 2020-06-24. Last modified 2020-06-24. |
|||
