Lancia Flaminia is an automobile that has a 4 door saloon (sedan) type body designed by Pininfarina with a front located engine powering the rear wheels.
The Lancia Flaminia is one of the 813.10 range of cars from Lancia.
The 2.5 litre engine is a naturally aspirated, overhead valve, 6 cylinder that has an output of 108 bhp (110 PS/81 kW) of power at 5200 rpm, and maximum torque of 188 N·m (139 lb·ft/19.2 kgm) at 3000 rpm.
The engine transfers its power through to the wheels via a 4 speed manual gearbox.
The Lancia Flaminia weighs a claimed 1560 kg at the kerb.
Its maximum speed quoted is 169 km/h, which is 105 mph.
Full specs
|
|
|||
| Karosserie | |||
|---|---|---|---|
| Karosserie | 4/5 seater sedan/saloon | ||
| Anzahl türen | 4 | ||
| Entwerfer | Pininfarina | ||
| Maße und Gewicht | |||
| Radstand | 2870 | 113 Zoll | |
| Spurweite vorn | 1368 | 53.9 Zoll | |
| Spurweite hinten | 1370 | 53.9 Zoll | |
| Länge | 4855 | 191.1 Zoll | |
| Breite | 1750 | 68.9 Zoll | |
| Höhe | 1480 | 58.3 Zoll | |
| Bodenfreiheit | |||
| 1.69 | |||
| Leergewicht | 1560 kg | 3439 Pfund | |
| Gewichtsverteilung (vorn) | |||
| Tankinhalt | 58 litres | 12.8 [15.3] UK [US] gal. | |
| Aerodynamik | |||
| Luftwiderstandsbeiwert | |||
| Stirnfläche | |||
| CdA | |||
| Motorisierung | |||
| naturally aspirated petrol | |||
| Motor Hersteller | Lancia | ||
| Motor-Typ | 813.10 | ||
| Anzahl zylinders | V 6 in 60° vee | ||
| Hubraum | 2.5 litre 2458 cc (149.996 cu in) |
||
| Bohrung × Hub | 80 × 81.5 mm
3.15 × 3.21 in |
||
| Bohrung/Hub Verhältnis | 0.98 | ||
| Verteilung | overhead valve (OHV)
2 Ventile pro Zylinder 12 Insgesamt Ventile |
||
| Leistung (CUNA) |
110 PS (108 bhp) (81 kW) bei 5200 U/min |
||
| Max. Drehmoment (CUNA) |
188 Nm (139 ft·lb) (19.2 kgm) bei 3000 U/min |
||
| spezifisches Leistung (CUNA) |
32.8 kW/litre 44.5 ps/litre 43.9 bhp/litre 0.72 bhp/cu in |
||
| Spezifisches Drehmoment (CUNA) |
76.48 Nm/litre
0.92 ft·lb/cu3 |
||
| Engine construction | |||
| Schmierung | nassersumpf | ||
| Verdichtungsverhältnis | 8.4:1 | ||
| Vergasser/Einspritzung | 1 Solex C 40 PAAI carburettor | ||
| effektiver Mitteldruck | 961.1 kPa (139.4 psi) | ||
| Höchstdrezahl | |||
| Anzahl der Kurbelwellenlager | |||
| Abkühlen | Water | ||
| Einheitszylinderinhalt | 409.67 cc | ||
| Aspiration | Normal | ||
| Kompressor-typ | N/A | ||
| Ladeluftkühler | None | ||
| Katalysator | N | ||
| Fahrleistungen | |||
| 0-80km/h | |||
| 0-60mph | 14.6 s | ||
| 0-100km/h | |||
| 0-160km/h | |||
| 0-400m | 20.1 s | ||
| 0-1000m | |||
| Vmax/Höchstgeschwindigkeit | 169 km/h (105 mph) | ||
| Power-to-weight ratio | Higher is better 70.19 PS/tonne (1000 kg) 0.07 PS/kg 51.63 kW/tonne (1000 kg) 0.05 kW/kg 69.23 bhp/tonne (1000 kg) 0.07 bhp/kg 0.03 bhp/lb |
||
| Weight-to-power ratio | Lower is better 19.37 kg/kW 32.36 lb/bhp |
||
| Verbrauch | |||
| Verbrauch | |||
| universal fuel consumption (calculated from the above) | |||
| litres/100km | |||
| km/litre | |||
| UK MPG | |||
| US MPG | |||
| Carbon dioxide emissions | |||
| Carfolio Calculated CO2 ? | |||
| VED band (UK) | |||
| CO2 Effizienz (DE) | |||
| Fahrgestell | |||
| Motor Platzierung | front | ||
| Engine layout | longitudinal | ||
| Antrieb | rear wheel drive | ||
| Drehmomentverteilung | N/A | ||
| Lenkungtyp | |||
| Lenkradumdrehungen | |||
| Wendekruis | |||
| Radaufhängen vorn | I.W.CS. | ||
| Radaufhängen hintern | dD.SE. | ||
| Rädergröße vorn | |||
| Rädergröße hintern | |||
| Reifen vorn | 175 x 400 | ||
| Reifen hintern | 175 x 400 | ||
| Bremsen vorn/hintern | Di/Di | ||
| Bremse Durchmesser vorn | |||
| Bremse Durchmesser hintern | |||
| Braked area | |||
| Getriebe | 4 gang Schaltgetriebe | ||
| Hinterachse | 1 | ||
| Hinterachse Übersetzungen | 3.92 | ||
| Allgemein | |||
| Carfolio.com ID | 64603 | ||
| Production total | |||
| Modellnummer | |||
| 813.10 | |||
| RAC rating | 23.8 | ||
| Insurance classification | No information available | ||
| Tax band | No information available | ||
|
1961 Lancia Flaminia (1963) added before December 1995. Last modified 2022-05-03. |
|||
