The Lancia Flaminia is a rear wheel drive automobile, with its engine placed in the front, and a 4 door saloon (sedan) bodyshell designed by Pininfarina.
It forms part of Lancia's 813.00 series.
Powering the Lancia Flaminia is an overhead valve, 2.5 litre naturally aspirated 6 cylinder motor, with 2 valves per cylinder that produces power and torque figures of 101 bhp (102 PS/75 kW) at 4800 rpm and 186 N·m (137 lb·ft/19 kgm) at 3000 rpm respectively.
The engine drives the wheels through a 4 speed manual transmission.
Quoted kerb weight is 1440 kg.
Maximum speed claimed is 160 km/h or 99 mph.
Full specs
|
|
|||
| Carrocería | |||
|---|---|---|---|
| Carrocería | 4/5 seater sedan/saloon | ||
| Número de puertas | 4 | ||
| diseñado por | Pininfarina | ||
| Dimensiones y pesos | |||
| Distancia entre ejes | 2870 | 113 | |
| Vía delantera | 1368 | 53.9 | |
| Vía trasera | 1370 | 53.9 | |
| Longitud | 4855 | 191.1 | |
| Ancho | 1750 | 68.9 | |
| Altura | 1461 | 57.5 | |
| Despeje del suelo | |||
| Relación Largo:Dist.entre ejes | 1.69 | ||
| Peso en vacío | 1440 kg | 3175 | |
| Distribución del peso (% adelante) | |||
| Capacità serbatoio | |||
| Aerodinámica | |||
| Coeficiente de penetración | |||
| Superficie frontal | |||
| SCx | |||
| Tren motriz | |||
| naturally aspirated petrol | |||
| Fabricante del motor | Lancia | ||
| Código de motor | 813.00 | ||
| Número de cilindros | V 6 in 60° vee | ||
| Cilindrada | 2.5 litre 2458 cc (149.996 cu in) |
||
| Diámetro × Carrera | 80 × 81.5 mm
3.15 × 3.21 in |
||
| Relación diámetro/carrera | 0.98 | ||
| Distribución | overhead valve (OHV)
2 válvulas por cilindro 12 Total de válvulas |
||
| Potencia nominal (Gross) |
102 PS (101 bhp) (75 kW) a 4800 rpm |
||
| Par motor máximo (Gross) |
186 Nm (137 ft·lb) (19 kgm) a 3000 rpm |
||
| Potencia específica (Gross) |
30.6 kW/litre 41.7 ps/litre 41.1 bhp/litre 0.67 bhp/cu in |
||
(Gross) |
75.67 Nm/litre
0.91 ft·lb/cu3 |
||
| Materiales de block / culata | |||
| Lubricación | Cárter húmedo | ||
| Relación de compresión | 8:1 | ||
| Alimentación | 1 Solex PAAI carburettor | ||
| 950.9 kPa (137.9 psi) | |||
| Maximum RPM | |||
| Casquillos de cigüeñal | |||
| Engine coolant | Water | ||
| 409.67 cc | |||
| Aspiración | Normal | ||
| Compresor | N/A | ||
| intercooler | None | ||
| catalizador | N | ||
| Rendimiento | |||
| 0-80km/h | |||
| 0-60mph | |||
| 0-100km/h | |||
| 0-160km/h | |||
| 0-400m | |||
| 0-1000m | |||
| Velocidad máxima | 160 km/h (99 mph) | ||
| Power-to-weight ratio | Higher is better 71.11 PS/tonne (1000 kg) 0.07 PS/kg 52.3 kW/tonne (1000 kg) 0.05 kW/kg 70.14 bhp/tonne (1000 kg) 0.07 bhp/kg 0.03 bhp/lb |
||
| Weight-to-power ratio | Lower is better 19.12 kg/kW 31.94 lb/bhp |
||
| Consumos | |||
| Consumo de combustible | |||
| universal fuel consumption (calculated from the above) | |||
| litres/100km | |||
| km/litre | |||
| UK MPG | |||
| US MPG | |||
| Emisiones de CO2 | |||
| Carfolio Calculated CO2 ? | |||
| VED band (UK) | |||
| CO2 Effizienz (DE) | |||
| Chasis | |||
| Ubicación del motor | front | ||
| Engine layout | unknown | ||
| Tracción | rear wheel drive | ||
| Alimentación | N/A | ||
| Dirección, tipo | |||
| turns lock-to-lock | |||
| Turning circle | |||
| Suspensión delantera | I.W.CS. | ||
| Suspensión trasera | dD.SE. | ||
| Ruedas delante | |||
| Ruedas detrás | |||
| Neumáticos delante | 165 x 400 | ||
| Neumáticos detrás | 165 x 400 | ||
| Brakes F/R | Dr/Dr | ||
| Front brake diameter | |||
| Rear brake diameter | |||
| Braked area | |||
| Transmisión | 4 speed manual | ||
| Eje trasero desmultiplicación | 1 | ||
| Desmultiplicación grupo cónico | 3.90 | ||
| General | |||
| Carfolio.com ID | 64592 | ||
| Unidades producidas | |||
| Model code | |||
| 813.00 | |||
| RAC rating | 23.8 | ||
| Insurance classification | No information available | ||
| Tax band | No information available | ||
|
1957 Lancia Flaminia added before December 1995. Last modified 2022-05-03. |
|||
