The Lancia Flaminia is a rear wheel drive motor car, with its engine located in the front, and a 4 door saloon (sedan) body.
It is powered by a naturally aspirated engine of 2.8 litre capacity. This unit features overhead valve valve gear, a 60 degree V 6 cylinder layout, and 2 valves per cylinder. It develops 127 bhp (129 PS/95 kW) of power at 5000 rpm, and maximum torque of 228 N·m (168 lb·ft/23.3 kgm) at 2500 rpm.
The engine delivers its power through to the wheels via a 4 speed manual gearbox.
Quoted kerb weight is 1560 kg.
Maximum stated speed is 171 km/h (106 mph).
Full specs
|
|
|||
| Carrocería | |||
|---|---|---|---|
| Carrocería | 4/5 seater sedan/saloon | ||
| Número de puertas | 4 | ||
| diseñado por | |||
| Dimensiones y pesos | |||
| Distancia entre ejes | 2870 | 113 | |
| Vía delantera | 1378 | 54.3 | |
| Vía trasera | 1359 | 53.5 | |
| Longitud | 4800 | 189 | |
| Ancho | 1740 | 68.5 | |
| Altura | 1480 | 58.3 | |
| Despeje del suelo | 127 | 5 | |
| Relación Largo:Dist.entre ejes | 1.67 | ||
| Peso en vacío | 1560 kg | 3439 | |
| Distribución del peso (% adelante) | |||
| Capacità serbatoio | 58 litres | 12.8 [15.3] UK [US] gal. | |
| Aerodinámica | |||
| Coeficiente de penetración | |||
| Superficie frontal | |||
| SCx | |||
| Tren motriz | |||
| naturally aspirated petrol | |||
| Fabricante del motor | Lancia | ||
| Código de motor | |||
| Número de cilindros | V 6 in 60° vee | ||
| Cilindrada | 2.8 litre 2775 cc (169.341 cu in) |
||
| Diámetro × Carrera | 85 × 81.5 mm
3.35 × 3.21 in |
||
| Relación diámetro/carrera | 1.04 | ||
| Distribución | overhead valve (OHV)
2 válvulas por cilindro 12 Total de válvulas |
||
| Potencia nominal (Net) |
129 PS (127 bhp) (95 kW) a 5000 rpm |
||
| Par motor máximo (Net) |
228 Nm (168 ft·lb) (23.3 kgm) a 2500 rpm |
||
| Potencia específica (Net) |
34.1 kW/litre 46.4 ps/litre 45.8 bhp/litre 0.75 bhp/cu in |
||
(Net) |
82.16 Nm/litre
0.99 ft·lb/cu3 |
||
| Materiales de block / culata | |||
| Lubricación | Cárter húmedo | ||
| Relación de compresión | 9:1 | ||
| Alimentación | 1 Solex C 40 PAAI carburettor | ||
| 1032.5 kPa (149.7 psi) | |||
| Maximum RPM | |||
| Casquillos de cigüeñal | |||
| Engine coolant | Water | ||
| 462.5 cc | |||
| Aspiración | Normal | ||
| Compresor | N/A | ||
| intercooler | None | ||
| catalizador | N | ||
| Rendimiento | |||
| 0-80km/h | |||
| 0-60mph | |||
| 0-100km/h | |||
| 0-160km/h | |||
| 0-400m | |||
| 0-1000m | |||
| Velocidad máxima | 171 km/h (106 mph) | ||
| Power-to-weight ratio | Higher is better 82.54 PS/tonne (1000 kg) 0.08 PS/kg 60.71 kW/tonne (1000 kg) 0.06 kW/kg 81.41 bhp/tonne (1000 kg) 0.08 bhp/kg 0.04 bhp/lb |
||
| Weight-to-power ratio | Lower is better 16.47 kg/kW 27.51 lb/bhp |
||
| Consumos | |||
| Consumo de combustible | |||
| universal fuel consumption (calculated from the above) | |||
| litres/100km | |||
| km/litre | |||
| UK MPG | |||
| US MPG | |||
| Emisiones de CO2 | |||
| Carfolio Calculated CO2 ? | |||
| VED band (UK) | |||
| CO2 Effizienz (DE) | |||
| Chasis | |||
| Ubicación del motor | front | ||
| Engine layout | longitudinal | ||
| Tracción | rear wheel drive | ||
| Alimentación | N/A | ||
| Dirección, tipo | |||
| turns lock-to-lock | |||
| Turning circle | 12.00 m | ||
| Suspensión delantera | I.CS.W. | ||
| Suspensión trasera | dD.SE. | ||
| Ruedas delante | |||
| Ruedas detrás | |||
| Neumáticos delante | Michelin XA 175 x 400 | ||
| Neumáticos detrás | Michelin XA 175 x 400 | ||
| Brakes F/R | Di/Di | ||
| Front brake diameter | 292 mm | ||
| Rear brake diameter | 305 mm | ||
| Braked area | |||
| Transmisión | 4 speed manual | ||
| Eje trasero desmultiplicación | 1 | ||
| Desmultiplicación grupo cónico | 3.92 | ||
| General | |||
| Carfolio.com ID | 64251 | ||
| Unidades producidas | |||
| Model code | |||
| RAC rating | 26.9 | ||
| Insurance classification | No information available | ||
| Tax band | No information available | ||
|
1963 Lancia Flaminia added before December 1995. Last modified 2013-02-28. |
|||