The Lancia Appia C10 is a saloon (sedan) with a front mounted powerplant which transmits its power through the rear wheels.
Power is produced by an overhead valve, 1.1 litre naturally aspirated 4 cylinder motor, with 2 valves per cylinder that develops power and torque figures of 38 bhp (38.5 PS/28.3 kW) at 4800 rpm and 70 N·m (52 lb·ft/7.1 kgm) at 3000 rpm respectively.
This power is transmitted to the wheels through a 4 speed manual transmission.
The quoted weight at the kerb is 813 kg.
Full specs
|
|
|||
| Karosserie | |||
|---|---|---|---|
| Karosserie | 4/5 seater sedan/saloon | ||
| Anzahl türen | |||
| Entwerfer | |||
| Maße und Gewicht | |||
| Radstand | 2483 | 97.8 Zoll | |
| Spurweite vorn | |||
| Spurweite hinten | |||
| Länge | 3874 | 152.5 Zoll | |
| Breite | 1422 | 56 Zoll | |
| Höhe | 1422 | 56 Zoll | |
| Bodenfreiheit | 159 | 6.3 Zoll | |
| 1.56 | |||
| Leergewicht | 813 kg | 1792 Pfund | |
| Gewichtsverteilung (vorn) | |||
| Tankinhalt | 37.5 litres | 8.2 [9.9] UK [US] gal. | |
| Aerodynamik | |||
| Luftwiderstandsbeiwert | |||
| Stirnfläche | |||
| CdA | |||
| Motorisierung | |||
| naturally aspirated petrol | |||
| Motor Hersteller | Lancia | ||
| Motor-Typ | |||
| Anzahl zylinders | V 4 | ||
| Hubraum | 1.1 litre 1091 cc (66.577 cu in) |
||
| Bohrung × Hub | 68 × 75 mm
2.68 × 2.95 in |
||
| Bohrung/Hub Verhältnis | 0.91 | ||
| Verteilung | overhead valve (OHV)
2 Ventile pro Zylinder 8 Insgesamt Ventile |
||
| Leistung | 38.5 PS (38 bhp) (28.3 kW) bei 4800 U/min |
||
| Max. Drehmoment | 70 Nm (52 ft·lb) (7.1 kgm) bei 3000 U/min |
||
| spezifisches Leistung | 26 kW/litre 35.3 ps/litre 34.8 bhp/litre 0.57 bhp/cu in |
||
| Spezifisches Drehmoment |
64.16 Nm/litre
0.78 ft·lb/cu3 |
||
| Engine construction | |||
| Schmierung | |||
| Verdichtungsverhältnis | 7.4:1 | ||
| Vergasser/Einspritzung | 1 So carb | ||
| effektiver Mitteldruck | 806.3 kPa (116.9 psi) | ||
| Höchstdrezahl | |||
| Anzahl der Kurbelwellenlager | |||
| Abkühlen | Water | ||
| Einheitszylinderinhalt | 272.75 cc | ||
| Aspiration | Normal | ||
| Kompressor-typ | N/A | ||
| Ladeluftkühler | None | ||
| Katalysator | N | ||
| Fahrleistungen | |||
| 0-80km/h | |||
| 0-60mph | |||
| 0-100km/h | |||
| 0-160km/h | |||
| 0-400m | |||
| 0-1000m | |||
| Vmax/Höchstgeschwindigkeit | |||
| Power-to-weight ratio | Higher is better 47.39 PS/tonne (1000 kg) 0.05 PS/kg 34.85 kW/tonne (1000 kg) 0.03 kW/kg 46.74 bhp/tonne (1000 kg) 0.05 bhp/kg 0.02 bhp/lb |
||
| Weight-to-power ratio | Lower is better 28.69 kg/kW 47.92 lb/bhp |
||
| Verbrauch | |||
| Verbrauch | |||
| universal fuel consumption (calculated from the above) | |||
| litres/100km | |||
| km/litre | |||
| UK MPG | |||
| US MPG | |||
| Carbon dioxide emissions | |||
| Carfolio Calculated CO2 ? | |||
| VED band (UK) | |||
| CO2 Effizienz (DE) | |||
| Fahrgestell | |||
| Motor Platzierung | front | ||
| Engine layout | longitudinal | ||
| Antrieb | rear wheel drive | ||
| Drehmomentverteilung | N/A | ||
| Lenkungtyp | |||
| Lenkradumdrehungen | |||
| Wendekruis | |||
| Radaufhängen vorn | I.CS. | ||
| Radaufhängen hintern | LA.SE. | ||
| Rädergröße vorn | |||
| Rädergröße hintern | |||
| Reifen vorn | |||
| Reifen hintern | |||
| Bremsen vorn/hintern | Dr/Dr | ||
| Bremse Durchmesser vorn | |||
| Bremse Durchmesser hintern | |||
| Braked area | |||
| Getriebe | 4 gang Schaltgetriebe | ||
| Hinterachse | 1 | ||
| Hinterachse Übersetzungen | 4.55 | ||
| Allgemein | |||
| Carfolio.com ID | 64867 | ||
| Production total | |||
| Modellnummer | |||
| RAC rating | 11.5 | ||
| Insurance classification | No information available | ||
| Tax band | No information available | ||
|
1953 Lancia Appia C10 added before December 1995. Last modified 2013-02-28. |
|||