The Lancia Appia C10 is a saloon (sedan) with a front mounted powerplant which transmits its power through the rear wheels.
Power is produced by an overhead valve, 1.1 litre naturally aspirated 4 cylinder motor, with 2 valves per cylinder that develops power and torque figures of 38 bhp (38.5 PS/28.3 kW) at 4800 rpm and 70 N·m (52 lb·ft/7.1 kgm) at 3000 rpm respectively.
This power is transmitted to the wheels through a 4 speed manual transmission.
The quoted weight at the kerb is 813 kg.
Full specs
|
|
|||
| bodywork | |||
|---|---|---|---|
| Body type | 4/5 seater sedan/saloon | ||
| Number of doors | |||
| Designer | |||
| dimensions & weights | |||
| Wheelbase | 2483 mm | 97.8 inches | |
| Track/tread (front) | |||
| Track/tread (rear) | |||
| Length | 3874 mm | 152.5 inches | |
| Width | 1422 mm | 56 inches | |
| Height | 1422 mm | 56 inches | |
| Ground clearance | 159 mm | 6.3 inches | |
| length:wheelbase ratio | 1.56 | ||
| Kerb weight | 813 kg | 1792 lb | |
| Weight distribution | |||
| fuel tank capacity | 37.5 litres | 8.2 [9.9] UK [US] gal. | |
| aerodynamics | |||
| Drag coefficient | |||
| Frontal area | |||
| CdA | |||
| Powertrain | |||
| engine type | naturally aspirated petrol | ||
| Engine manufacturer | Lancia | ||
| Engine code | |||
| Cylinders | V 4 | ||
| Capacity | 1.1 litre 1091 cc (66.577 cu in) |
||
| Bore × Stroke | 68 × 75 mm
2.68 × 2.95 in |
||
| Bore/stroke ratio | 0.91 | ||
| Valve gear | overhead valve (OHV)
2 valves per cylinder 8 valves in total |
||
| maximum power output | 38.5 PS (38 bhp) (28.3 kW) at 4800 rpm |
||
| maximum torque | 70 Nm (52 ft·lb) (7.1 kgm) at 3000 rpm |
||
| Specific output | 26 kW/litre 35.3 ps/litre 34.8 bhp/litre 0.57 bhp/cu in |
||
| Specific torque |
64.16 Nm/litre
0.78 ft·lb/cu3 |
||
| Engine construction | |||
| Lubrication | |||
| compression ratio | 7.4:1 | ||
| Fuel system | 1 So carb | ||
| bmep (brake mean effective pressure) | 806.3 kPa (116.9 psi) | ||
| Maximum RPM | |||
| crankshaft bearings | |||
| Engine coolant | Water | ||
| Unitary capacity | 272.75 cc | ||
| Aspiration | Normal | ||
| Compressor | N/A | ||
| Intercooler | None | ||
| Catalytic converter | N | ||
| performance | |||
| Acceleration 0-80km/h (50mph) | |||
| Acceleration 0-60mph | |||
| Acceleration 0-100km/h | |||
| Acceleration 0-160km/h (100mph) | |||
| Standing quarter-mile | |||
| Standing kilometre | |||
| Maximum speed | |||
| Power-to-weight ratio | Higher is better 47.39 PS/tonne (1000 kg) 0.05 PS/kg 34.85 kW/tonne (1000 kg) 0.03 kW/kg 46.74 bhp/tonne (1000 kg) 0.05 bhp/kg 0.02 bhp/lb |
||
| Weight-to-power ratio | Lower is better 28.69 kg/kW 47.92 lb/bhp |
||
| fuel consumption | |||
| Fuel consumption | |||
| universal fuel consumption (calculated from the above) | |||
| litres/100km | |||
| km/litre | |||
| UK MPG | |||
| US MPG | |||
| Carbon dioxide emissions | |||
| Carfolio Calculated CO2 ? | |||
| VED band (UK) | |||
| CO2 Effizienz (DE) | |||
| chassis | |||
| Engine position | front | ||
| Engine layout | longitudinal | ||
| Drive wheels | rear wheel drive | ||
| Torque split | N/A | ||
| Steering | |||
| turns lock-to-lock | |||
| Turning circle | |||
| Front suspension | I.CS. | ||
| Rear suspension | LA.SE. | ||
| Wheel size front | |||
| Wheel size rear | |||
| Tyres front | |||
| Tyres rear | |||
| Brakes F/R | Dr/Dr | ||
| Front brake diameter | |||
| Rear brake diameter | |||
| Braked area | |||
| Gearbox | 4 speed manual | ||
| Top gear ratio | 1 | ||
| Final drive ratio | 4.55 | ||
| general | |||
| Carfolio.com ID | 64867 | ||
| Production total | |||
| Model code | |||
| RAC rating | 11.5 | ||
| Insurance classification | No information available | ||
| Tax band | No information available | ||
|
1953 Lancia Appia C10 added before December 1995. Last modified 2013-02-28. |
|||