The Holden Commodore Wagon Executive is a rear wheel drive vehicle, with its powerplant placed in the front, and a 5 door estate/station wagon bodyshell.
The Commodore Wagon Executive is part of Holden's VL series.
Power is produced by a single overhead camshaft, 3 litre naturally aspirated 6 cylinder engine, with 2 valves per cylinder that develops power and torque figures of 153 bhp (155 PS/114 kW) at 5200 rpm and 247 N·m (182 lb·ft/25.2 kgm) at 3600 rpm respectively.
The engine supplies its power through to the wheels via a 4 speed automatic gearbox.
Its claimed weight at the kerb is 1308 kg.
Full specs
|
|
|||
| Carrocería | |||
|---|---|---|---|
| Carrocería | 4/5 seater estate/station wagon | ||
| Número de puertas | 5 | ||
| diseñado por | |||
| Dimensiones y pesos | |||
| Distancia entre ejes | 2668 | 105 | |
| Vía delantera | 1451 | 57.1 | |
| Vía trasera | 1433 | 56.4 | |
| Longitud | 4763 | 187.5 | |
| Ancho | 1722 | 67.8 | |
| Altura | 1389 | 54.7 | |
| Despeje del suelo | 155 | 6.1 | |
| Relación Largo:Dist.entre ejes | 1.79 | ||
| Peso en vacío | 1308 kg | 2884 | |
| Distribución del peso (% adelante) | |||
| Capacità serbatoio | 68 litres | 15 [18] UK [US] gal. | |
| Aerodinámica | |||
| Coeficiente de penetración | |||
| Superficie frontal | |||
| SCx | |||
| Tren motriz | |||
| naturally aspirated petrol | |||
| Fabricante del motor | Nissan | ||
| Código de motor | RB30E | ||
| Número de cilindros | Straight 6 | ||
| Cilindrada | 3 litre 2962 cc (180.752 cu in) |
||
| Diámetro × Carrera | 86 × 85 mm
3.39 × 3.35 in |
||
| Relación diámetro/carrera | 1.01 | ||
| Distribución | single overhead camshaft (SOHC)
2 válvulas por cilindro 12 Total de válvulas |
||
| Potencia nominal | 155 PS (153 bhp) (114 kW) a 5200 rpm |
||
| Par motor máximo | 247 Nm (182 ft·lb) (25.2 kgm) a 3600 rpm |
||
| Potencia específica | 38.5 kW/litre 52.4 ps/litre 51.7 bhp/litre 0.85 bhp/cu in |
||
|
83.39 Nm/litre
1.01 ft·lb/cu3 |
|||
| Materiales de block / culata | |||
| Lubricación | Cárter húmedo | ||
| Relación de compresión | 9:1 | ||
| Alimentación | MPFI | ||
| 1047.9 kPa (152 psi) | |||
| Maximum RPM | |||
| Casquillos de cigüeñal | |||
| Engine coolant | Water | ||
| 493.67 cc | |||
| Aspiración | Normal | ||
| Compresor | N/A | ||
| intercooler | None | ||
| catalizador | N | ||
| Rendimiento | |||
| 0-80km/h | |||
| 0-60mph | |||
| 0-100km/h | |||
| 0-160km/h | |||
| 0-400m | |||
| 0-1000m | |||
| Velocidad máxima | |||
| Power-to-weight ratio | Higher is better 118.6 PS/tonne (1000 kg) 0.12 PS/kg 87.23 kW/tonne (1000 kg) 0.09 kW/kg 116.97 bhp/tonne (1000 kg) 0.12 bhp/kg 0.05 bhp/lb |
||
| Weight-to-power ratio | Lower is better 11.46 kg/kW 19.15 lb/bhp |
||
| Consumos | |||
| Consumo de combustible | |||
| universal fuel consumption (calculated from the above) | |||
| litres/100km | |||
| km/litre | |||
| UK MPG | |||
| US MPG | |||
| Emisiones de CO2 | |||
| Carfolio Calculated CO2 ? | |||
| VED band (UK) | |||
| CO2 Effizienz (DE) | |||
| Chasis | |||
| Ubicación del motor | front | ||
| Engine layout | longitudinal | ||
| Tracción | rear wheel drive | ||
| Alimentación | N/A | ||
| Dirección, tipo | |||
| turns lock-to-lock | |||
| Turning circle | |||
| Suspensión delantera | I.MS.CS.ARB. | ||
| Suspensión trasera | |||
| Ruedas delante | 6.0JJ x 14 | ||
| Ruedas detrás | 6.0JJ x 14 | ||
| Neumáticos delante | P185/75 HR 14 | ||
| Neumáticos detrás | P185/75 HR 14 | ||
| Brakes F/R | Di/Dr-S | ||
| Front brake diameter | |||
| Rear brake diameter | |||
| Braked area | |||
| Transmisión | 4 speed automatic | ||
| Eje trasero desmultiplicación | 0.68 | ||
| Desmultiplicación grupo cónico | 3.45 | ||
| General | |||
| Carfolio.com ID | 251273 | ||
| Unidades producidas | |||
| Model code | |||
| VL | |||
| RAC rating | 27.5 | ||
| Insurance classification | No information available | ||
| Tax band | No information available | ||
|
1986 Holden Commodore Wagon Executive added 2011-08-06. Last modified 2020-02-17. |
|||