The Commodore Wagon is a rear wheel drive estate/station wagon car with a front positioned engine, produced by Holden.
The Commodore Wagon is part of Holden's VP model series.
Its 3.8 litre engine is a naturally aspirated, overhead valve, 6 cylinder unit that has an output of 170.5 bhp (173 PS/127 kW) of power at 4800 rpm, and maximum torque of 298 N·m (220 lb·ft/30.4 kgm) at 3200 rpm.
The engine delivers its power through to the wheels by means of a 5 speed manual transmission.
The Holden Commodore Wagon weighs a stated 1300 kg at the kerb.
Full specs
|
|
|||
| Carrocería | |||
|---|---|---|---|
| Carrocería | 4/5 seater estate/station wagon | ||
| Número de puertas | 5 | ||
| diseñado por | |||
| Dimensiones y pesos | |||
| Distancia entre ejes | 2820 | 111 | |
| Vía delantera | 1450 | 57.1 | |
| Vía trasera | 1480 | 58.3 | |
| Longitud | 4895 | 192.7 | |
| Ancho | 1795 | 70.7 | |
| Altura | 1420 | 55.9 | |
| Despeje del suelo | |||
| Relación Largo:Dist.entre ejes | 1.74 | ||
| Peso en vacío | 1300 kg | 2866 | |
| Distribución del peso (% adelante) | |||
| Capacità serbatoio | 68 litres | 15 [18] UK [US] gal. | |
| Aerodinámica | |||
| Coeficiente de penetración | |||
| Superficie frontal | |||
| SCx | |||
| Tren motriz | |||
| naturally aspirated petrol | |||
| Fabricante del motor | GM | ||
| Código de motor | LN3 3800 | ||
| Número de cilindros | V 6 in 90° vee | ||
| Cilindrada | 3.8 litre 3791 cc (231.341 cu in) |
||
| Diámetro × Carrera | 96.52 × 86.36 mm
3.8 × 3.4 in |
||
| Relación diámetro/carrera | 1.12 | ||
| Distribución | overhead valve (OHV)
2 válvulas por cilindro 12 Total de válvulas |
||
| Potencia nominal (DIN) |
173 PS (170.5 bhp) (127 kW) a 4800 rpm |
||
| Par motor máximo (DIN) |
298 Nm (220 ft·lb) (30.4 kgm) a 3200 rpm |
||
| Potencia específica (DIN) |
33.5 kW/litre 45.6 ps/litre 45 bhp/litre 0.74 bhp/cu in |
||
(DIN) |
78.61 Nm/litre
0.95 ft·lb/cu3 |
||
| Materiales de block / culata | |||
| Lubricación | Cárter húmedo | ||
| Relación de compresión | 8.5:1 | ||
| Alimentación | EFI | ||
| 987.8 kPa (143.3 psi) | |||
| Maximum RPM | |||
| Casquillos de cigüeñal | 4 | ||
| Engine coolant | Water | ||
| 631.83 cc | |||
| Aspiración | Normal | ||
| Compresor | N/A | ||
| intercooler | None | ||
| catalizador | N | ||
| Rendimiento | |||
| 0-80km/h | |||
| 0-60mph | |||
| 0-100km/h | |||
| 0-160km/h | |||
| 0-400m | |||
| 0-1000m | |||
| Velocidad máxima | |||
| Power-to-weight ratio | Higher is better 132.98 PS/tonne (1000 kg) 0.13 PS/kg 97.8 kW/tonne (1000 kg) 0.1 kW/kg 131.15 bhp/tonne (1000 kg) 0.13 bhp/kg 0.06 bhp/lb |
||
| Weight-to-power ratio | Lower is better 10.22 kg/kW 17.08 lb/bhp |
||
| Consumos | |||
| Consumo de combustible | |||
| universal fuel consumption (calculated from the above) | |||
| litres/100km | |||
| km/litre | |||
| UK MPG | |||
| US MPG | |||
| Emisiones de CO2 | |||
| Carfolio Calculated CO2 ? | |||
| VED band (UK) | |||
| CO2 Effizienz (DE) | |||
| Chasis | |||
| Ubicación del motor | front | ||
| Engine layout | longitudinal | ||
| Tracción | rear wheel drive | ||
| Alimentación | N/A | ||
| Dirección, tipo | |||
| turns lock-to-lock | |||
| Turning circle | |||
| Suspensión delantera | |||
| Suspensión trasera | |||
| Ruedas delante | 6J x 14 | ||
| Ruedas detrás | 6J x 14 | ||
| Neumáticos delante | 185/75 HR 14 | ||
| Neumáticos detrás | 185/75 HR 14 | ||
| Brakes F/R | VeDi/Di-S | ||
| Front brake diameter | 270 mm | ||
| Rear brake diameter | |||
| Braked area | |||
| Transmisión | 5 speed manual | ||
| Eje trasero desmultiplicación | 0.72 | ||
| Desmultiplicación grupo cónico | 3.08 | ||
| General | |||
| Carfolio.com ID | 250811 | ||
| Unidades producidas | |||
| Model code | |||
| VP | |||
| RAC rating | 34.7 | ||
| Insurance classification | No information available | ||
| Tax band | No information available | ||
|
1993 Holden Commodore Wagon added 2011-08-02. Last modified 2020-02-02. |
|||