The Holden Commodore V8 SS is a rear wheel drive motor vehicle, with the engine located in the front, and a 4 door saloon (sedan) bodyshell.
The Holden Commodore V8 SS belongs to the VT range of cars from Holden.
It's powered courtesy of a naturally aspirated engine of 5 litre capacity. This unit features overhead valve valve gear, a 90 degree V 8 cylinder layout, and 2 valves per cylinder. It develops 261 bhp (265 PS/195 kW) of power at 5200 rpm, and maximum torque of 430 N·m (317 lb·ft/43.8 kgm) at 3600 rpm.
The engine transmits power to the wheels via a 4 speed automatic set of gears.
Full specs
|
|
|||
| Carrocería | |||
|---|---|---|---|
| Carrocería | 4/5 seater sedan/saloon | ||
| Número de puertas | 4 | ||
| diseñado por | |||
| Dimensiones y pesos | |||
| Distancia entre ejes | 2788 | 109.8 | |
| Vía delantera | 1569 | 61.8 | |
| Vía trasera | 1587 | 62.5 | |
| Longitud | 4884 | 192.3 | |
| Ancho | 1842 | 72.5 | |
| Altura | 1450 | 57.1 | |
| Despeje del suelo | |||
| Relación Largo:Dist.entre ejes | 1.75 | ||
| Peso en vacío | |||
| Distribución del peso (% adelante) | |||
| Capacità serbatoio | 75 litres | 16.5 [19.8] UK [US] gal. | |
| Aerodinámica | |||
| Coeficiente de penetración | |||
| Superficie frontal | |||
| SCx | |||
| Tren motriz | |||
| naturally aspirated petrol | |||
| Fabricante del motor | GM | ||
| Código de motor | |||
| Número de cilindros | V 8 in 90° vee | ||
| Cilindrada | 5 litre 4987 cc (304.325 cu in) |
||
| Diámetro × Carrera | 101.6 × 76.8 mm
4 × 3.02 in |
||
| Relación diámetro/carrera | 1.32 | ||
| Distribución | overhead valve (OHV)
2 válvulas por cilindro 16 Total de válvulas |
||
| Potencia nominal (DIN) |
265 PS (261 bhp) (195 kW) a 5200 rpm |
||
| Par motor máximo (DIN) |
430 Nm (317 ft·lb) (43.8 kgm) a 3600 rpm |
||
| Potencia específica (DIN) |
39 kW/litre 53.1 ps/litre 52.3 bhp/litre 0.86 bhp/cu in |
||
(DIN) |
86.22 Nm/litre
1.04 ft·lb/cu3 |
||
| Materiales de block / culata | |||
| Lubricación | Cárter húmedo | ||
| Relación de compresión | 8.8:1 | ||
| Alimentación | MPFI | ||
| 1083.5 kPa (157.2 psi) | |||
| Maximum RPM | |||
| Casquillos de cigüeñal | |||
| Engine coolant | Water | ||
| 623.38 cc | |||
| Aspiración | Normal | ||
| Compresor | N/A | ||
| intercooler | None | ||
| catalizador | Y | ||
| Rendimiento | |||
| 0-80km/h | |||
| 0-60mph | |||
| 0-100km/h | |||
| 0-160km/h | |||
| 0-400m | |||
| 0-1000m | |||
| Velocidad máxima | |||
| Power-to-weight ratio | |||
| Weight-to-power ratio | |||
| Consumos | |||
| Consumo de combustible | |||
| universal fuel consumption (calculated from the above) | |||
| litres/100km | |||
| km/litre | |||
| UK MPG | |||
| US MPG | |||
| Emisiones de CO2 | |||
| Carfolio Calculated CO2 ? | |||
| VED band (UK) | |||
| CO2 Effizienz (DE) | |||
| Chasis | |||
| Ubicación del motor | front | ||
| Engine layout | longitudinal | ||
| Tracción | rear wheel drive | ||
| Alimentación | N/A | ||
| Dirección, tipo | |||
| turns lock-to-lock | |||
| Turning circle | |||
| Suspensión delantera | |||
| Suspensión trasera | |||
| Ruedas delante | 8 x 17 | ||
| Ruedas detrás | 8 x 17 | ||
| Neumáticos delante | P235/45 R 17 95V | ||
| Neumáticos detrás | P235/45 R 17 95V | ||
| Brakes F/R | VeDi/Di-S-ABS | ||
| Front brake diameter | |||
| Rear brake diameter | |||
| Braked area | |||
| Transmisión | 4 speed automatic | ||
| Eje trasero desmultiplicación | 0.7 | ||
| Desmultiplicación grupo cónico | 3.08 | ||
| General | |||
| Carfolio.com ID | 514360 | ||
| Unidades producidas | |||
| Model code | |||
| VT | |||
| RAC rating | 51.2 | ||
| Insurance classification | No information available | ||
| Tax band | No information available | ||
|
1997 Holden Commodore V8 SS Automatic added 2017-04-01. Last modified 2020-03-16. |
|||