The Holden Commodore SS Wagon Series II is a 5 door estate/station wagon-bodied car with a front located engine powering the rear wheels.
Power is produced by an overhead valve, 5.7 litre naturally aspirated 8 cylinder motor, with 2 valves per cylinder that provides power and torque figures of 328 bhp (333 PS/245 kW) at 5600 rpm and 465 N·m (343 lb·ft/47.4 kgm) at 4000 rpm respectively.
Power is transmitted to the wheels through a 4 speed automatic gearbox.
Full specs
|
|
|||
| bodywork | |||
|---|---|---|---|
| Body type | 4/5 seater estate/station wagon | ||
| Number of doors | 5 | ||
| Designer | |||
| dimensions & weights | |||
| Wheelbase | 2938 mm | 115.7 inches | |
| Track/tread (front) | 1569 mm | 61.8 inches | |
| Track/tread (rear) | 1587 mm | 62.5 inches | |
| Length | 5025 mm | 197.8 inches | |
| Width | 1847 mm | 72.7 inches | |
| Height | 1527 mm | 60.1 inches | |
| Ground clearance | |||
| length:wheelbase ratio | 1.71 | ||
| Kerb weight | |||
| Weight distribution | |||
| fuel tank capacity | 75 litres | 16.5 [19.8] UK [US] gal. | |
| aerodynamics | |||
| Drag coefficient | |||
| Frontal area | |||
| CdA | |||
| Powertrain | |||
| engine type | naturally aspirated petrol | ||
| Engine manufacturer | Chevrolet | ||
| Engine code | |||
| Cylinders | V 8 in 90° vee | ||
| Capacity | 5.7 litre 5665 cc (345.7 cu in) |
||
| Bore × Stroke | 99 × 92 mm
3.9 × 3.62 in |
||
| Bore/stroke ratio | 1.08 | ||
| Valve gear | overhead valve (OHV)
2 valves per cylinder 16 valves in total |
||
| maximum power output (DIN) |
333 PS (328 bhp) (245 kW) at 5600 rpm |
||
| maximum torque (DIN) |
465 Nm (343 ft·lb) (47.4 kgm) at 4000 rpm |
||
| Specific output (DIN) |
43.2 kW/litre 58.7 ps/litre 57.9 bhp/litre 0.95 bhp/cu in |
||
| Specific torque (DIN) |
82.08 Nm/litre
0.99 ft·lb/cu3 |
||
| Engine construction | |||
| Lubrication | |||
| compression ratio | 10.1:1 | ||
| Fuel system | SFi | ||
| bmep (brake mean effective pressure) | 1031.5 kPa (149.6 psi) | ||
| Maximum RPM | |||
| crankshaft bearings | |||
| Engine coolant | Water | ||
| Unitary capacity | 708.13 cc | ||
| Aspiration | Normal | ||
| Compressor | N/A | ||
| Intercooler | None | ||
| Catalytic converter | Y | ||
| performance | |||
| Acceleration 0-80km/h (50mph) | |||
| Acceleration 0-60mph | |||
| Acceleration 0-100km/h | |||
| Acceleration 0-160km/h (100mph) | |||
| Standing quarter-mile | |||
| Standing kilometre | |||
| Maximum speed | |||
| Power-to-weight ratio | |||
| Weight-to-power ratio | |||
| fuel consumption | |||
| Fuel consumption | |||
| universal fuel consumption (calculated from the above) | |||
| litres/100km | |||
| km/litre | |||
| UK MPG | |||
| US MPG | |||
| Carbon dioxide emissions | |||
| Carfolio Calculated CO2 ? | |||
| VED band (UK) | |||
| CO2 Effizienz (DE) | |||
| chassis | |||
| Engine position | front | ||
| Engine layout | longitudinal | ||
| Drive wheels | rear wheel drive | ||
| Torque split | N/A | ||
| Steering | |||
| turns lock-to-lock | |||
| Turning circle | |||
| Front suspension | I.MS.CS.ARB. | ||
| Rear suspension | I. | ||
| Wheel size front | |||
| Wheel size rear | |||
| Tyres front | |||
| Tyres rear | |||
| Brakes F/R | VeDi/Di-S-ABS | ||
| Front brake diameter | |||
| Rear brake diameter | |||
| Braked area | |||
| Gearbox | 4 speed automatic | ||
| Top gear ratio | 0.7 | ||
| Final drive ratio | 3.08 | ||
| general | |||
| Carfolio.com ID | 119933 | ||
| Production total | |||
| Model code | |||
| RAC rating | 48.6 | ||
| Insurance classification | No information available | ||
| Tax band | No information available | ||
|
2003 Holden Commodore SS Wagon Series II Automatic added 2004-05-12. Last modified 2013-02-28. |
|||