Holden Commodore SS Wagon Series II is an automobile that has a 5 door estate/station wagon type body with a front mounted engine supplying power to the rear wheels.
Powering the Holden Commodore SS Wagon Series II is an overhead valve, 5.7 litre naturally aspirated 8 cylinder motor, with 2 valves per cylinder that develops power and torque figures of 328 bhp (333 PS/245 kW) at 5600 rpm and 465 N·m (343 lb·ft/47.4 kgm) at 4000 rpm respectively.
The engine drives the wheels via a 6 speed manual transmission.
Full specs
|
|
|||
| Carrocería | |||
|---|---|---|---|
| Carrocería | 4/5 seater estate/station wagon | ||
| Número de puertas | 5 | ||
| diseñado por | |||
| Dimensiones y pesos | |||
| Distancia entre ejes | 2938 | 115.7 | |
| Vía delantera | 1569 | 61.8 | |
| Vía trasera | 1587 | 62.5 | |
| Longitud | 5025 | 197.8 | |
| Ancho | 1847 | 72.7 | |
| Altura | 1527 | 60.1 | |
| Despeje del suelo | |||
| Relación Largo:Dist.entre ejes | 1.71 | ||
| Peso en vacío | |||
| Distribución del peso (% adelante) | |||
| Capacità serbatoio | 75 litres | 16.5 [19.8] UK [US] gal. | |
| Aerodinámica | |||
| Coeficiente de penetración | |||
| Superficie frontal | |||
| SCx | |||
| Tren motriz | |||
| naturally aspirated petrol | |||
| Fabricante del motor | Chevrolet | ||
| Código de motor | |||
| Número de cilindros | V 8 in 90° vee | ||
| Cilindrada | 5.7 litre 5665 cc (345.7 cu in) |
||
| Diámetro × Carrera | 99 × 92 mm
3.9 × 3.62 in |
||
| Relación diámetro/carrera | 1.08 | ||
| Distribución | overhead valve (OHV)
2 válvulas por cilindro 16 Total de válvulas |
||
| Potencia nominal (DIN) |
333 PS (328 bhp) (245 kW) a 5600 rpm |
||
| Par motor máximo (DIN) |
465 Nm (343 ft·lb) (47.4 kgm) a 4000 rpm |
||
| Potencia específica (DIN) |
43.2 kW/litre 58.7 ps/litre 57.9 bhp/litre 0.95 bhp/cu in |
||
(DIN) |
82.08 Nm/litre
0.99 ft·lb/cu3 |
||
| Materiales de block / culata | |||
| Lubricación | |||
| Relación de compresión | 10.1:1 | ||
| Alimentación | SFi | ||
| 1031.5 kPa (149.6 psi) | |||
| Maximum RPM | |||
| Casquillos de cigüeñal | |||
| Engine coolant | Water | ||
| 708.13 cc | |||
| Aspiración | Normal | ||
| Compresor | N/A | ||
| intercooler | None | ||
| catalizador | Y | ||
| Rendimiento | |||
| 0-80km/h | |||
| 0-60mph | |||
| 0-100km/h | |||
| 0-160km/h | |||
| 0-400m | |||
| 0-1000m | |||
| Velocidad máxima | |||
| Power-to-weight ratio | |||
| Weight-to-power ratio | |||
| Consumos | |||
| Consumo de combustible | |||
| universal fuel consumption (calculated from the above) | |||
| litres/100km | |||
| km/litre | |||
| UK MPG | |||
| US MPG | |||
| Emisiones de CO2 | |||
| Carfolio Calculated CO2 ? | |||
| VED band (UK) | |||
| CO2 Effizienz (DE) | |||
| Chasis | |||
| Ubicación del motor | front | ||
| Engine layout | longitudinal | ||
| Tracción | rear wheel drive | ||
| Alimentación | N/A | ||
| Dirección, tipo | |||
| turns lock-to-lock | |||
| Turning circle | |||
| Suspensión delantera | I.MS.CS.ARB. | ||
| Suspensión trasera | I. | ||
| Ruedas delante | |||
| Ruedas detrás | |||
| Neumáticos delante | |||
| Neumáticos detrás | |||
| Brakes F/R | VeDi/Di-S-ABS | ||
| Front brake diameter | |||
| Rear brake diameter | |||
| Braked area | |||
| Transmisión | 6 speed manual | ||
| Eje trasero desmultiplicación | 0.5 | ||
| Desmultiplicación grupo cónico | 3.46 | ||
| General | |||
| Carfolio.com ID | 119691 | ||
| Unidades producidas | |||
| Model code | |||
| RAC rating | 48.6 | ||
| Insurance classification | No information available | ||
| Tax band | No information available | ||
|
2003 Holden Commodore SS Wagon Series II added 2004-05-12. Last modified 2013-02-28. |
|||