This automobile has a 4 door saloon (sedan) body style with a front mounted engine powering the rear wheels.
It is part of Holden's VH series.
Power is produced by an overhead valve, 2.8 litre naturally aspirated 6 cylinder powerplant, with 2 valves per cylinder that develops power and torque figures of 98 bhp (99 PS/73 kW) at 4400 rpm and 187 N·m (138 lb·ft/19.1 kgm) at 2800 rpm respectively.
The engine supplies its power through to the wheels by means of a 5 speed manual transmission.
Quoted kerb weight is 1228 kg.
Full specs
|
|
|||
| Carrocería | |||
|---|---|---|---|
| Carrocería | 4/5 seater sedan/saloon | ||
| Número de puertas | 4 | ||
| diseñado por | |||
| Dimensiones y pesos | |||
| Distancia entre ejes | 2668 | 105 | |
| Vía delantera | 1480 | 58.3 | |
| Vía trasera | 1440 | 56.7 | |
| Longitud | 4706 | 185.3 | |
| Ancho | 1722 | 67.8 | |
| Altura | 1360 | 53.5 | |
| Despeje del suelo | |||
| Relación Largo:Dist.entre ejes | 1.76 | ||
| Peso en vacío | 1228 kg | 2707 | |
| Distribución del peso (% adelante) | |||
| Capacità serbatoio | 63 litres | 13.9 [16.6] UK [US] gal. | |
| Aerodinámica | |||
| Coeficiente de penetración | |||
| Superficie frontal | |||
| SCx | |||
| Tren motriz | |||
| naturally aspirated petrol | |||
| Fabricante del motor | GM | ||
| Código de motor | GMH 2850 | ||
| Número de cilindros | Straight 6 | ||
| Cilindrada | 2.8 litre 2838 cc (173.185 cu in) |
||
| Diámetro × Carrera | 88.9 × 76.2 mm
3.5 × 3 in |
||
| Relación diámetro/carrera | 1.17 | ||
| Distribución | overhead valve (OHV)
2 válvulas por cilindro 12 Total de válvulas |
||
| Potencia nominal (DIN) |
99 PS (98 bhp) (73 kW) a 4400 rpm |
||
| Par motor máximo (DIN) |
187 Nm (138 ft·lb) (19.1 kgm) a 2800 rpm |
||
| Potencia específica (DIN) |
25.8 kW/litre 35 ps/litre 34.5 bhp/litre 0.57 bhp/cu in |
||
(DIN) |
65.89 Nm/litre
0.8 ft·lb/cu3 |
||
| Materiales de block / culata | cast iron block & head | ||
| Lubricación | Cárter húmedo | ||
| Relación de compresión | 9:1 | ||
| Alimentación | 1 Stromberg carburettor | ||
| 828 kPa (120.1 psi) | |||
| Maximum RPM | |||
| Casquillos de cigüeñal | 7 | ||
| Engine coolant | Water | ||
| 473 cc | |||
| Aspiración | Normal | ||
| Compresor | N/A | ||
| intercooler | None | ||
| catalizador | N | ||
| Rendimiento | |||
| 0-80km/h | |||
| 0-60mph | |||
| 0-100km/h | |||
| 0-160km/h | |||
| 0-400m | |||
| 0-1000m | |||
| Velocidad máxima | |||
| Power-to-weight ratio | Higher is better 80.91 PS/tonne (1000 kg) 0.08 PS/kg 59.51 kW/tonne (1000 kg) 0.06 kW/kg 79.8 bhp/tonne (1000 kg) 0.08 bhp/kg 0.04 bhp/lb |
||
| Weight-to-power ratio | Lower is better 16.8 kg/kW 28.07 lb/bhp |
||
| Consumos | |||
| Consumo de combustible | |||
| universal fuel consumption (calculated from the above) | |||
| litres/100km | |||
| km/litre | |||
| UK MPG | |||
| US MPG | |||
| Emisiones de CO2 | |||
| Carfolio Calculated CO2 ? | |||
| VED band (UK) | |||
| CO2 Effizienz (DE) | |||
| Chasis | |||
| Ubicación del motor | front | ||
| Engine layout | longitudinal | ||
| Tracción | rear wheel drive | ||
| Alimentación | N/A | ||
| Dirección, tipo | |||
| turns lock-to-lock | 4.100 | ||
| Turning circle | |||
| Suspensión delantera | |||
| Suspensión trasera | |||
| Ruedas delante | 6J x 14 | ||
| Ruedas detrás | 6J x 14 | ||
| Neumáticos delante | CR78S 14 | ||
| Neumáticos detrás | CR78S 14 | ||
| Brakes F/R | VeDi/Dr-S | ||
| Front brake diameter | |||
| Rear brake diameter | |||
| Braked area | |||
| Transmisión | 5 speed manual | ||
| Eje trasero desmultiplicación | 0.85 | ||
| Desmultiplicación grupo cónico | 3.36 | ||
| General | |||
| Carfolio.com ID | 694155 | ||
| Unidades producidas | |||
| Model code | |||
| VH | |||
| RAC rating | 29.4 | ||
| Insurance classification | No information available | ||
| Tax band | No information available | ||
|
1981 Holden Commodore SL 2.8 added 2020-07-22. Last modified 2020-07-23. |
|||