The Pinto Pony is a rear wheel drive saloon (sedan) automobile with a front located engine, produced by Ford.
It is powered by a naturally aspirated engine of 2.3 litre capacity. This powerplant features single overhead camshaft valve gear, 4 cylinder layout, and 2 valves per cylinder. It develops 88 bhp (89 PS/66 kW) of power at 4800 rpm, and maximum torque of 160 N·m (118 lb·ft/16.3 kgm) at 2800 rpm.
A 4 speed manual gearbox transfers the power to the driven wheels.
The claimed kerb weight is 1100 kg.
Full specs
|
|
|||
| Carrocería | |||
|---|---|---|---|
| Carrocería | 4/5 seater sedan/saloon | ||
| Número de puertas | 2 | ||
| diseñado por | |||
| Dimensiones y pesos | |||
| Distancia entre ejes | 2400 | 94.5 | |
| Vía delantera | 1397 | 55 | |
| Vía trasera | 1417 | 55.8 | |
| Longitud | 4300 | 169.3 | |
| Ancho | 1763 | 69.4 | |
| Altura | 1285 | 50.6 | |
| Despeje del suelo | |||
| Relación Largo:Dist.entre ejes | 1.79 | ||
| Peso en vacío | 1100 kg | 2425 | |
| Distribución del peso (% adelante) | |||
| Capacità serbatoio | 49.2 litres | 10.8 [13] UK [US] gal. | |
| Aerodinámica | |||
| Coeficiente de penetración | |||
| Superficie frontal | |||
| SCx | |||
| Tren motriz | |||
| naturally aspirated petrol | |||
| Fabricante del motor | Ford | ||
| Código de motor | |||
| Número de cilindros | Straight 4 | ||
| Cilindrada | 2.3 litre 2301 cc (140.416 cu in) |
||
| Diámetro × Carrera | 96.04 × 79.4 mm
3.78 × 3.13 in |
||
| Relación diámetro/carrera | 1.21 | ||
| Distribución | single overhead camshaft (SOHC)
2 válvulas por cilindro 8 Total de válvulas |
||
| Potencia nominal (SAE net) |
89 PS (88 bhp) (66 kW) a 4800 rpm |
||
| Par motor máximo (SAE net) |
160 Nm (118 ft·lb) (16.3 kgm) a 2800 rpm |
||
| Potencia específica (SAE net) |
28.5 kW/litre 38.8 ps/litre 38.2 bhp/litre 0.63 bhp/cu in |
||
(SAE net) |
69.53 Nm/litre
0.84 ft·lb/cu3 |
||
| Materiales de block / culata | cast iron block & head | ||
| Lubricación | Cárter húmedo | ||
| Relación de compresión | 9:1 | ||
| Alimentación | 1 Holley-Weber carburettor | ||
| 873.8 kPa (126.7 psi) | |||
| Maximum RPM | |||
| Casquillos de cigüeñal | 5 | ||
| Engine coolant | Water | ||
| 575.25 cc | |||
| Aspiración | Normal | ||
| Compresor | N/A | ||
| intercooler | None | ||
| catalizador | Y | ||
| Rendimiento | |||
| 0-80km/h | |||
| 0-60mph | |||
| 0-100km/h | |||
| 0-160km/h | |||
| 0-400m | |||
| 0-1000m | |||
| Velocidad máxima | |||
| Power-to-weight ratio | Higher is better 81.11 PS/tonne (1000 kg) 0.08 PS/kg 59.66 kW/tonne (1000 kg) 0.06 kW/kg 80 bhp/tonne (1000 kg) 0.08 bhp/kg 0.04 bhp/lb |
||
| Weight-to-power ratio | Lower is better 16.76 kg/kW 28 lb/bhp |
||
| Consumos | |||
| Consumo de combustible | |||
| universal fuel consumption (calculated from the above) | |||
| litres/100km | |||
| km/litre | |||
| UK MPG | |||
| US MPG | |||
| Emisiones de CO2 | |||
| Carfolio Calculated CO2 ? | |||
| VED band (UK) | |||
| CO2 Effizienz (DE) | |||
| Chasis | |||
| Ubicación del motor | front | ||
| Engine layout | longitudinal | ||
| Tracción | rear wheel drive | ||
| Alimentación | N/A | ||
| Dirección, tipo | |||
| turns lock-to-lock | |||
| Turning circle | |||
| Suspensión delantera | |||
| Suspensión trasera | |||
| Ruedas delante | 5 x 13 | ||
| Ruedas detrás | 5 x 13 | ||
| Neumáticos delante | A78-13 | ||
| Neumáticos detrás | A78-13 | ||
| Brakes F/R | VeDi/Dr | ||
| Front brake diameter | 236 mm | ||
| Rear brake diameter | |||
| Braked area | |||
| Transmisión | 4 speed manual | ||
| Eje trasero desmultiplicación | 1 | ||
| Desmultiplicación grupo cónico | 2.73 | ||
| General | |||
| Carfolio.com ID | 683749 | ||
| Unidades producidas | |||
| Model code | |||
| RAC rating | 22.9 | ||
| Insurance classification | No information available | ||
| Tax band | No information available | ||
|
1978 Ford Pinto Pony added 2020-06-25. Last modified 2020-07-01. |
|||