This car has a 3 door saloon (sedan) type body with a front mounted engine supplying power to the rear wheels.
It is part of Ford's Pinto model series.
The Ford Pinto's engine is a naturally aspirated petrol, 2 litre, single overhead camshaft 4 cylinder with 2 valves per cylinder. This powerplant has an output of 100 bhp (101 PS/75 kW) of power at 5600 rpm, and maximum torque of 163 N·m (120 lb·ft/16.6 kgm) at 3600 rpm.
This power is delivered to the wheels through a 3 speed automatic gearbox.
Its quoted weight at the kerb is 979 kg.
Full specs
|
|
|||
| Carrocería | |||
|---|---|---|---|
| Carrocería | 4/5 seater sedan/saloon | ||
| Número de puertas | 3 | ||
| diseñado por | |||
| Dimensiones y pesos | |||
| Distancia entre ejes | 2388 | 94 | |
| Vía delantera | 1397 | 55 | |
| Vía trasera | 1397 | 55 | |
| Longitud | 4140 | 163 | |
| Ancho | 1763 | 69.4 | |
| Altura | 1273 | 50.1 | |
| Despeje del suelo | |||
| Relación Largo:Dist.entre ejes | 1.73 | ||
| Peso en vacío | 979 kg | 2158 | |
| Distribución del peso (% adelante) | 55.2% front | ||
| Capacità serbatoio | 41.7 litres | 9.2 [11] UK [US] gal. | |
| Aerodinámica | |||
| Coeficiente de penetración | |||
| Superficie frontal | |||
| SCx | |||
| Tren motriz | |||
| naturally aspirated petrol | |||
| Fabricante del motor | Ford | ||
| Código de motor | Kent | ||
| Número de cilindros | Straight 4 | ||
| Cilindrada | 2 litre 1992 cc (121.559 cu in) |
||
| Diámetro × Carrera | 90.8 × 76.9 mm
3.57 × 3.03 in |
||
| Relación diámetro/carrera | 1.18 | ||
| Distribución | single overhead camshaft (SOHC)
2 válvulas por cilindro 8 Total de válvulas |
||
| Potencia nominal (gross) |
101 PS (100 bhp) (75 kW) a 5600 rpm |
||
| Par motor máximo (gross) |
163 Nm (120 ft·lb) (16.6 kgm) a 3600 rpm |
||
| Potencia específica (gross) |
37.4 kW/litre 50.9 ps/litre 50.2 bhp/litre 0.82 bhp/cu in |
||
(gross) |
81.83 Nm/litre
0.99 ft·lb/cu3 |
||
| Materiales de block / culata | cast iron block & head | ||
| Lubricación | Cárter húmedo | ||
| Relación de compresión | 9:1 | ||
| Alimentación | 1 Weber 32/36 DFAV carburettor | ||
| 1028.3 kPa (149.1 psi) | |||
| Maximum RPM | |||
| Casquillos de cigüeñal | 5 | ||
| Engine coolant | Water | ||
| 498 cc | |||
| Aspiración | Normal | ||
| Compresor | N/A | ||
| intercooler | None | ||
| catalizador | N | ||
| Rendimiento | |||
| 0-80km/h | |||
| 0-60mph | |||
| 0-100km/h | |||
| 0-160km/h | |||
| 0-400m | |||
| 0-1000m | |||
| Velocidad máxima | |||
| Power-to-weight ratio | Higher is better 103.56 PS/tonne (1000 kg) 0.1 PS/kg 76.17 kW/tonne (1000 kg) 0.08 kW/kg 102.15 bhp/tonne (1000 kg) 0.1 bhp/kg 0.05 bhp/lb |
||
| Weight-to-power ratio | Lower is better 13.13 kg/kW 21.93 lb/bhp |
||
| Consumos | |||
| Consumo de combustible | |||
| universal fuel consumption (calculated from the above) | |||
| litres/100km | |||
| km/litre | |||
| UK MPG | |||
| US MPG | |||
| Emisiones de CO2 | |||
| Carfolio Calculated CO2 ? | |||
| VED band (UK) | |||
| CO2 Effizienz (DE) | |||
| Chasis | |||
| Ubicación del motor | front | ||
| Engine layout | longitudinal | ||
| Tracción | rear wheel drive | ||
| Alimentación | N/A | ||
| Dirección, tipo | |||
| turns lock-to-lock | 4.120 | ||
| Turning circle | |||
| Suspensión delantera | |||
| Suspensión trasera | |||
| Ruedas delante | 4.00JJ x 13 | ||
| Ruedas detrás | 4.00JJ X 13 | ||
| Neumáticos delante | 6.00-13 | ||
| Neumáticos detrás | 6.00-13 | ||
| Brakes F/R | Dr/Dr | ||
| Front brake diameter | 229 mm | ||
| Rear brake diameter | 229 mm | ||
| Braked area | |||
| Transmisión | 3 speed automatic | ||
| Eje trasero desmultiplicación | 1 | ||
| Desmultiplicación grupo cónico | 3.18 | ||
| General | |||
| Carfolio.com ID | 623194 | ||
| Unidades producidas | |||
| Model code | 64B | ||
| Pinto | |||
| RAC rating | 20.4 | ||
| Insurance classification | No information available | ||
| Tax band | No information available | ||
|
1971 Ford Pinto Automatic added 2020-01-23. Last modified 2020-03-16. |
|||
