The Ford Crown Victoria is a rear wheel drive motor vehicle, with its engine positioned in the front, and a 4 door saloon (sedan) bodyshell.
Its 8 cylinder, single overhead camshaft naturally aspirated powerplant has 2 valves per cylinder and a displacement of 4.6 litres. It provides power and torque figures of 200 bhp (203 PS/149 kW) at 4250 rpm and 373 Nm (275 lbft/38 kgm) at 3000 rpm respectively.
This power is supplied to the wheels by means of a 4 speed automatic gearbox.
Stated kerb weight is 1777 kg.
Full specs
|
|
Applicable to the USA domestic market(s). | ||
| bodywork | |||
|---|---|---|---|
| Body type | 4/5 seater sedan/saloon | ||
| Number of doors | 4 | ||
| Designer | |||
| dimensions & weights | |||
| Wheelbase | 2913 mm | 114.7 inches | |
| Track/tread (front) | 1610 mm | 63.4 inches | |
| Track/tread (rear) | 1659 mm | 65.3 inches | |
| Length | 5385 mm | 212 inches | |
| Width | 1986 mm | 78.2 inches | |
| Height | 1443 mm | 56.8 inches | |
| Ground clearance | |||
| length:wheelbase ratio | 1.85 | ||
| Kerb weight | 1777 kg | 3918 lb | |
| Weight distribution | |||
| fuel tank capacity | 72 litres | 15.8 [19] UK [US] gal. | |
| aerodynamics | |||
| Drag coefficient | |||
| Frontal area | |||
| CdA | |||
| Powertrain | |||
| engine type | naturally aspirated petrol | ||
| Engine manufacturer | Ford | ||
| Engine code | |||
| Cylinders | V 8 in 90° vee | ||
| Capacity | 4.6 litre 4601 cc (280.77 cu in) |
||
| Bore × Stroke | 90.2 × 90 mm
3.55 × 3.54 in |
||
| Bore/stroke ratio | 1 | ||
| Valve gear | single overhead camshaft (SOHC)
2 valves per cylinder 16 valves in total |
||
| maximum power output (SAE net) |
203 PS (200 bhp) (149 kW) at 4250 rpm |
||
| maximum torque (SAE net) |
373 Nm (275 ft·lb) (38 kgm) at 3000 rpm |
||
| Specific output (SAE net) |
32.4 kW/litre 44.1 ps/litre 43.5 bhp/litre 0.71 bhp/cu in |
||
| Specific torque (SAE net) |
81.07 Nm/litre
0.98 ft·lb/cu3 |
||
| Engine construction | |||
| Lubrication | wet sumped | ||
| compression ratio | 9:1 | ||
| Fuel system | EFI | ||
| bmep (brake mean effective pressure) | 1018.7 kPa (147.8 psi) | ||
| Maximum RPM | |||
| crankshaft bearings | 5 | ||
| Engine coolant | Water | ||
| Unitary capacity | 575.13 cc | ||
| Aspiration | Normal | ||
| Compressor | N/A | ||
| Intercooler | None | ||
| Catalytic converter | Y | ||
| performance | |||
| Acceleration 0-80km/h (50mph) | |||
| Acceleration 0-60mph | |||
| Acceleration 0-100km/h | |||
| Acceleration 0-160km/h (100mph) | |||
| Standing quarter-mile | |||
| Standing kilometre | |||
| Maximum speed | |||
| Power-to-weight ratio | Higher is better 114.11 PS/tonne (1000 kg) 0.11 PS/kg 83.93 kW/tonne (1000 kg) 0.08 kW/kg 112.55 bhp/tonne (1000 kg) 0.11 bhp/kg 0.05 bhp/lb |
||
| Weight-to-power ratio | Lower is better 11.91 kg/kW 19.9 lb/bhp |
||
| fuel consumption | |||
| Fuel consumption | |||
| universal fuel consumption (calculated from the above) | |||
| litres/100km | |||
| km/litre | |||
| UK MPG | |||
| US MPG | |||
| Carbon dioxide emissions | |||
| Carfolio Calculated CO2 ? | |||
| VED band (UK) | |||
| CO2 Effizienz (DE) | |||
| chassis | |||
| Engine position | front | ||
| Engine layout | longitudinal | ||
| Drive wheels | rear wheel drive | ||
| Torque split | N/A | ||
| Steering | |||
| turns lock-to-lock | 3.400 | ||
| Turning circle | |||
| Front suspension | I.CS. | ||
| Rear suspension | I.4Li.CS.WL. | ||
| Wheel size front | 7 x 16 | ||
| Wheel size rear | 7 x 16 | ||
| Tyres front | P225/60 SR 16 BSW | ||
| Tyres rear | P225/60 SR 16 BSW | ||
| Brakes F/R | Di/Di-S | ||
| Front brake diameter | 315 mm | ||
| Rear brake diameter | 282 mm | ||
| Braked area | |||
| Gearbox | 4 speed automatic | ||
| Top gear ratio | 0.7 | ||
| Final drive ratio | |||
| general | |||
| Carfolio.com ID | 172040 | ||
| Production total | |||
| Model code | |||
| RAC rating | 40.4 | ||
| Insurance classification | No information available | ||
| Tax band | No information available | ||
|
1999 Ford Crown Victoria (2000) added 2008-03-27. Last modified 2013-02-28. |
|||
