This automobile has a 4 door coupé type body with a front located engine delivering its power to the rear wheels.
Its engine is a naturally aspirated petrol, 5.2 litre, overhead valve 90 degree V 8 cylinder with 2 valves per cylinder. It develops 160 bhp (162 PS/119 kW) of power at 3600 rpm, and maximum torque of 366 N·m (270 lb·ft/37.3 kgm) at 1600 rpm.
The engine transfers its power through to the wheels via a 3 speed automatic gearbox.
The claimed weight at the kerb is 1991 kg.
Full specs
|
|
|||
| bodywork | |||
|---|---|---|---|
| Body type | 4/5 seater fixed-head coupé | ||
| Number of doors | 4 | ||
| Designer | |||
| dimensions & weights | |||
| Wheelbase | 3150 mm | 124 inches | |
| Track/tread (front) | 1626 mm | 64 inches | |
| Track/tread (rear) | 1610 mm | 63.4 inches | |
| Length | 5756 mm | 226.6 inches | |
| Width | 2019 mm | 79.5 inches | |
| Height | 1379 mm | 54.3 inches | |
| Ground clearance | 132 mm | 5.2 inches | |
| length:wheelbase ratio | 1.83 | ||
| Kerb weight | 1991 kg | 4389 lb | |
| Weight distribution | |||
| fuel tank capacity | 100 litres | 22 [26.4] UK [US] gal. | |
| aerodynamics | |||
| Drag coefficient | |||
| Frontal area | |||
| CdA | |||
| Powertrain | |||
| engine type | naturally aspirated petrol | ||
| Engine manufacturer | Chrysler | ||
| Engine code | |||
| Cylinders | V 8 in 90° vee | ||
| Capacity | 5.2 litre 5210 cc (317.934 cu in) |
||
| Bore × Stroke | 99.3 × 84.1 mm
3.91 × 3.31 in |
||
| Bore/stroke ratio | 1.18 | ||
| Valve gear | overhead valve (OHV)
2 valves per cylinder 16 valves in total |
||
| maximum power output (DIN) |
162 PS (160 bhp) (119 kW) at 3600 rpm |
||
| maximum torque (DIN) |
366 Nm (270 ft·lb) (37.3 kgm) at 1600 rpm |
||
| Specific output (DIN) |
22.9 kW/litre 31.1 ps/litre 30.7 bhp/litre 0.5 bhp/cu in |
||
| Specific torque (DIN) |
70.25 Nm/litre
0.85 ft·lb/cu3 |
||
| Engine construction | cast iron block & head | ||
| Lubrication | wet sumped | ||
| compression ratio | 8.4:1 | ||
| Fuel system | 1 Ca TQ9076S carb | ||
| bmep (brake mean effective pressure) | 882.8 kPa (128 psi) | ||
| Maximum RPM | 4000 rpm | ||
| crankshaft bearings | 5 | ||
| Engine coolant | Water | ||
| Unitary capacity | 651.25 cc | ||
| Aspiration | Normal | ||
| Compressor | N/A | ||
| Intercooler | None | ||
| Catalytic converter | Y | ||
| performance | |||
| Acceleration 0-80km/h (50mph) | |||
| Acceleration 0-60mph | |||
| Acceleration 0-100km/h | |||
| Acceleration 0-160km/h (100mph) | |||
| Standing quarter-mile | |||
| Standing kilometre | |||
| Maximum speed | |||
| Power-to-weight ratio | Higher is better 81.48 PS/tonne (1000 kg) 0.08 PS/kg 59.93 kW/tonne (1000 kg) 0.06 kW/kg 80.36 bhp/tonne (1000 kg) 0.08 bhp/kg 0.04 bhp/lb |
||
| Weight-to-power ratio | Lower is better 16.69 kg/kW 27.87 lb/bhp |
||
| fuel consumption | |||
| Fuel consumption | |||
| universal fuel consumption (calculated from the above) | |||
| litres/100km | |||
| km/litre | |||
| UK MPG | |||
| US MPG | |||
| Carbon dioxide emissions | |||
| Carfolio Calculated CO2 ? | |||
| VED band (UK) | |||
| CO2 Effizienz (DE) | |||
| chassis | |||
| Engine position | front | ||
| Engine layout | longitudinal | ||
| Drive wheels | rear wheel drive | ||
| Torque split | N/A | ||
| Steering | |||
| turns lock-to-lock | 3.500 | ||
| Turning circle | 14.60 m | ||
| Front suspension | I.W.TB.ARB. | ||
| Rear suspension | LA.SE. | ||
| Wheel size front | 5.5 x 15 | ||
| Wheel size rear | 5.5 x 15 | ||
| Tyres front | HR78 x 15 | ||
| Tyres rear | HR78 x 15 | ||
| Brakes F/R | VeDi/Dr-S | ||
| Front brake diameter | 295 mm | ||
| Rear brake diameter | |||
| Braked area | 2482 cm2 | ||
| Gearbox | 3 speed automatic | ||
| Top gear ratio | 1 | ||
| Final drive ratio | 2.71 | ||
| general | |||
| Carfolio.com ID | 122606 | ||
| Production total | |||
| Model code | |||
| RAC rating | 48.9 | ||
| Insurance classification | No information available | ||
| Tax band | No information available | ||
|
1977 Chrysler Newport Hardtop added 2004-11-12. Last modified 2013-02-28. |
|||