The Plymouth Fury I is a saloon (sedan) with 4 doors and a front mounted engine which transmits the power to the rear wheels.
The Plymouth Fury I is one of the FP2 model family from Plymouth.
Its 8 cylinder, overhead valve naturally aspirated engine has 2 valves per cylinder and a displacement of 6.3 litres. In this application it provides power and torque figures of 290 bhp (294 PS/216 kW) at 4400 rpm and 529 Nm (390 lbft/53.9 kgm) at 2800 rpm respectively.
The engine transfers its power through to the wheels via a 3 speed manual transmission.
Full specs
|
|
|||
| bodywork | |||
|---|---|---|---|
| Body type | 4/5 seater sedan/saloon | ||
| Number of doors | 4 | ||
| Designer | |||
| dimensions & weights | |||
| Wheelbase | 3048 mm | 120 inches | |
| Track/tread (front) | 1577 mm | 62.1 inches | |
| Track/tread (rear) | 1575 mm | 62 inches | |
| Length | 5458 mm | 214.9 inches | |
| Width | 2019 mm | 79.5 inches | |
| Height | 1400 mm | 55.1 inches | |
| Ground clearance | 117 mm | 4.6 inches | |
| length:wheelbase ratio | 1.79 | ||
| Kerb weight | |||
| Weight distribution | |||
| fuel tank capacity | 90.9 litres | 20 [24] UK [US] gal. | |
| aerodynamics | |||
| Drag coefficient | |||
| Frontal area | |||
| CdA | |||
| Powertrain | |||
| engine type | naturally aspirated petrol | ||
| Engine manufacturer | Chrysler | ||
| Engine code | |||
| Cylinders | V 8 in 90° vee | ||
| Capacity | 6.3 litre 6286 cc (383.595 cu in) |
||
| Bore × Stroke | 107.95 × 85.85 mm
4.25 × 3.38 in |
||
| Bore/stroke ratio | 1.26 | ||
| Valve gear | overhead valve (OHV)
2 valves per cylinder 16 valves in total |
||
| maximum power output (gross) |
294 PS (290 bhp) (216 kW) at 4400 rpm |
||
| maximum torque (gross) |
529 Nm (390 ft·lb) (53.9 kgm) at 2800 rpm |
||
| Specific output (gross) |
34.4 kW/litre 46.8 ps/litre 46.1 bhp/litre 0.76 bhp/cu in |
||
| Specific torque (gross) |
84.16 Nm/litre
1.02 ft·lb/cu3 |
||
| Engine construction | cast iron block & head | ||
| Lubrication | wet sumped | ||
| compression ratio | 8.7:1 | ||
| Fuel system | 1 Carter carburettor | ||
| bmep (brake mean effective pressure) | 1057.5 kPa (153.4 psi) | ||
| Maximum RPM | |||
| crankshaft bearings | 5 | ||
| Engine coolant | Water | ||
| Unitary capacity | 785.75 cc | ||
| Aspiration | Normal | ||
| Compressor | N/A | ||
| Intercooler | None | ||
| Catalytic converter | N | ||
| performance | |||
| Acceleration 0-80km/h (50mph) | |||
| Acceleration 0-60mph | |||
| Acceleration 0-100km/h | |||
| Acceleration 0-160km/h (100mph) | |||
| Standing quarter-mile | |||
| Standing kilometre | |||
| Maximum speed | |||
| Power-to-weight ratio | |||
| Weight-to-power ratio | |||
| fuel consumption | |||
| Fuel consumption | |||
| universal fuel consumption (calculated from the above) | |||
| litres/100km | |||
| km/litre | |||
| UK MPG | |||
| US MPG | |||
| Carbon dioxide emissions | |||
| Carfolio Calculated CO2 ? | |||
| VED band (UK) | |||
| CO2 Effizienz (DE) | |||
| chassis | |||
| Engine position | front | ||
| Engine layout | longitudinal | ||
| Drive wheels | rear wheel drive | ||
| Torque split | N/A | ||
| Steering | |||
| turns lock-to-lock | |||
| Turning circle | |||
| Front suspension | |||
| Rear suspension | |||
| Wheel size front | 5½JJ x 15 | ||
| Wheel size rear | 5½JJ x 15 | ||
| Tyres front | F78 x 15 | ||
| Tyres rear | F78 x 15 | ||
| Brakes F/R | Dr/Dr | ||
| Front brake diameter | 279 mm | ||
| Rear brake diameter | 279 mm | ||
| Braked area | |||
| Gearbox | 3 speed manual | ||
| Top gear ratio | 1 | ||
| Final drive ratio | 3.23 | ||
| general | |||
| Carfolio.com ID | 352407 | ||
| Production total | |||
| Model code | PE41 | ||
| Model family | FP2 | ||
| RAC rating | 57.8 | ||
| Insurance classification | No information available | ||
| Tax band | No information available | ||
|
1970 Plymouth Fury I added 2013-08-11. Last modified 2020-02-02. |
|||