The Dyna 58 Grand Standing is a motor vehicle from Panhard, with front wheel drive, a front located engine and a 4 door saloon (sedan) body style.
The 0.9 litre engine is a naturally aspirated, overhead valve, 2 cylinder that has an output of 41 bhp (41.6 PS/30.6 kW) of power at 5000 rpm, and maximum torque of 69 N·m (51 lb·ft/7 kgm) at 2250 rpm.
The engine delivers its power through to the wheels by means of a 4 speed manual transmission.
Its quoted weight at the kerb is 850 kg.
Full specs
|
|
|||
| bodywork | |||
|---|---|---|---|
| Body type | 4/5 seater sedan/saloon | ||
| Number of doors | 4 | ||
| Designer | |||
| dimensions & weights | |||
| Wheelbase | 2570 mm | 101.2 inches | |
| Track/tread (front) | 1300 mm | 51.2 inches | |
| Track/tread (rear) | 1300 mm | 51.2 inches | |
| Length | 4580 mm | 180.3 inches | |
| Width | 1660 mm | 65.4 inches | |
| Height | 1550 mm | 61 inches | |
| Ground clearance | 165 mm | 6.5 inches | |
| length:wheelbase ratio | 1.78 | ||
| Kerb weight | 850 kg | 1874 lb | |
| Weight distribution | |||
| fuel tank capacity | 40 litres | 8.8 [10.6] UK [US] gal. | |
| aerodynamics | |||
| Drag coefficient | |||
| Frontal area | |||
| CdA | |||
| Powertrain | |||
| engine type | naturally aspirated petrol | ||
| Engine manufacturer | Panhard | ||
| Engine code | |||
| Cylinders | Flat 2 | ||
| Capacity | 0.9 litre 851 cc (51.931 cu in) |
||
| Bore × Stroke | 85 × 75 mm
3.35 × 2.95 in |
||
| Bore/stroke ratio | 1.13 | ||
| Valve gear | overhead valve (OHV)
2 valves per cylinder 4 valves in total |
||
| maximum power output | 41.6 PS (41 bhp) (30.6 kW) at 5000 rpm |
||
| maximum torque | 69 Nm (51 ft·lb) (7 kgm) at 2250 rpm |
||
| Specific output | 35.9 kW/litre 48.8 ps/litre 48.2 bhp/litre 0.79 bhp/cu in |
||
| Specific torque |
81.08 Nm/litre
0.98 ft·lb/cu3 |
||
| Engine construction | |||
| Lubrication | wet sumped | ||
| compression ratio | 7.2:1 | ||
| Fuel system | 1 Zenith 36 WI carburettor | ||
| bmep (brake mean effective pressure) | 1018.9 kPa (147.8 psi) | ||
| Maximum RPM | |||
| crankshaft bearings | |||
| Engine coolant | Air | ||
| Unitary capacity | 425.5 cc | ||
| Aspiration | Normal | ||
| Compressor | N/A | ||
| Intercooler | None | ||
| Catalytic converter | N | ||
| performance | |||
| Acceleration 0-80km/h (50mph) | |||
| Acceleration 0-60mph | |||
| Acceleration 0-100km/h | |||
| Acceleration 0-160km/h (100mph) | |||
| Standing quarter-mile | |||
| Standing kilometre | |||
| Maximum speed | |||
| Power-to-weight ratio | Higher is better 48.91 PS/tonne (1000 kg) 0.05 PS/kg 35.97 kW/tonne (1000 kg) 0.04 kW/kg 48.24 bhp/tonne (1000 kg) 0.05 bhp/kg 0.02 bhp/lb |
||
| Weight-to-power ratio | Lower is better 27.8 kg/kW 46.44 lb/bhp |
||
| fuel consumption | |||
| Fuel consumption | |||
| universal fuel consumption (calculated from the above) | |||
| litres/100km | |||
| km/litre | |||
| UK MPG | |||
| US MPG | |||
| Carbon dioxide emissions | |||
| Carfolio Calculated CO2 ? | |||
| VED band (UK) | |||
| CO2 Effizienz (DE) | |||
| chassis | |||
| Engine position | front | ||
| Engine layout | longitudinal | ||
| Drive wheels | front wheel drive | ||
| Torque split | N/A | ||
| Steering | |||
| turns lock-to-lock | |||
| Turning circle | |||
| Front suspension | |||
| Rear suspension | |||
| Wheel size front | |||
| Wheel size rear | |||
| Tyres front | 145 x 400 | ||
| Tyres rear | 145 x 400 | ||
| Brakes F/R | Dr/Dr | ||
| Front brake diameter | |||
| Rear brake diameter | |||
| Braked area | |||
| Gearbox | 4 speed manual | ||
| Top gear ratio | 0.77 | ||
| Final drive ratio | 6.15 | ||
| general | |||
| Carfolio.com ID | 666952 | ||
| Production total | |||
| Model code | |||
| RAC rating | 9.0 | ||
| Insurance classification | No information available | ||
| Tax band | No information available | ||
|
1958 Panhard Dyna 58 Grand Standing added 2020-04-14. Last modified 2020-04-14. |
|||