The Familia 1.3 S is a motor vehicle from Mazda, with front wheel drive, a front located engine and a 3 door hatchback body style.
It's powered courtesy of a naturally aspirated engine of 1.3 litre capacity. This unit features single overhead camshaft valve gear, 4 cylinder layout, and 2 valves per cylinder. It has an output of 85 bhp (86 PS/63 kW) of power at 6000 rpm, and maximum torque of 110 N·m (81 lb·ft/11.2 kgm) at 4000 rpm.
The engine transfers its power through to the wheels by means of a 5 speed manual gearbox.
Stated kerb weight is 980 kg.
Full specs
|
|
|||
| Carrocería | |||
|---|---|---|---|
| Carrocería | 4/5 seater hatchback | ||
| Número de puertas | 3 | ||
| diseñado por | |||
| Dimensiones y pesos | |||
| Distancia entre ejes | 2505 | 98.6 | |
| Vía delantera | 1460 | 57.5 | |
| Vía trasera | 1460 | 57.5 | |
| Longitud | 4035 | 158.9 | |
| Ancho | 1695 | 66.7 | |
| Altura | 1405 | 55.3 | |
| Despeje del suelo | 150 | 5.9 | |
| Relación Largo:Dist.entre ejes | 1.61 | ||
| Peso en vacío | 980 kg | 2161 | |
| Distribución del peso (% adelante) | |||
| Capacità serbatoio | 50 litres | 11 [13.2] UK [US] gal. | |
| Aerodinámica | |||
| Coeficiente de penetración | |||
| Superficie frontal | |||
| SCx | |||
| Tren motriz | |||
| naturally aspirated petrol | |||
| Fabricante del motor | Mazda | ||
| Código de motor | |||
| Número de cilindros | Straight 4 | ||
| Cilindrada | 1.3 litre 1323 cc (80.734 cu in) |
||
| Diámetro × Carrera | 71 × 83.6 mm
2.8 × 3.29 in |
||
| Relación diámetro/carrera | 0.85 | ||
| Distribución | single overhead camshaft (SOHC)
2 válvulas por cilindro 8 Total de válvulas |
||
| Potencia nominal (JISnet) |
86 PS (85 bhp) (63 kW) a 6000 rpm |
||
| Par motor máximo (JISnet) |
110 Nm (81 ft·lb) (11.2 kgm) a 4000 rpm |
||
| Potencia específica (JISnet) |
47.9 kW/litre 65.1 ps/litre 64.2 bhp/litre 1.05 bhp/cu in |
||
(JISnet) |
83.14 Nm/litre
1 ft·lb/cu3 |
||
| Materiales de block / culata | |||
| Lubricación | |||
| Relación de compresión | 9.4:1 | ||
| Alimentación | EFI | ||
| 1044.8 kPa (151.5 psi) | |||
| Maximum RPM | |||
| Casquillos de cigüeñal | |||
| Engine coolant | Water | ||
| 330.75 cc | |||
| Aspiración | Normal | ||
| Compresor | N/A | ||
| intercooler | None | ||
| catalizador | Y | ||
| Rendimiento | |||
| 0-80km/h | |||
| 0-60mph | |||
| 0-100km/h | |||
| 0-160km/h | |||
| 0-400m | |||
| 0-1000m | |||
| Velocidad máxima | |||
| Power-to-weight ratio | Higher is better 87.94 PS/tonne (1000 kg) 0.09 PS/kg 64.68 kW/tonne (1000 kg) 0.06 kW/kg 86.73 bhp/tonne (1000 kg) 0.09 bhp/kg 0.04 bhp/lb |
||
| Weight-to-power ratio | Lower is better 15.46 kg/kW 25.83 lb/bhp |
||
| Consumos | |||
| Consumo de combustible | |||
| universal fuel consumption (calculated from the above) | |||
| litres/100km | |||
| km/litre | |||
| UK MPG | |||
| US MPG | |||
| Emisiones de CO2 | |||
| Carfolio Calculated CO2 ? | |||
| VED band (UK) | |||
| CO2 Effizienz (DE) | |||
| Chasis | |||
| Ubicación del motor | front | ||
| Engine layout | transverse | ||
| Tracción | front wheel drive | ||
| Alimentación | N/A | ||
| Dirección, tipo | |||
| turns lock-to-lock | |||
| Turning circle | |||
| Suspensión delantera | I.MS.CS. | ||
| Suspensión trasera | I.S.CS. | ||
| Ruedas delante | |||
| Ruedas detrás | |||
| Neumáticos delante | |||
| Neumáticos detrás | |||
| Brakes F/R | VeDi/Dr | ||
| Front brake diameter | |||
| Rear brake diameter | |||
| Braked area | |||
| Transmisión | 5 speed manual | ||
| Eje trasero desmultiplicación | 0.78 | ||
| Desmultiplicación grupo cónico | 4.11 | ||
| General | |||
| Carfolio.com ID | 28072 | ||
| Unidades producidas | |||
| Model code | |||
| RAC rating | 12.5 | ||
| Insurance classification | No information available | ||
| Tax band | No information available | ||
|
1996 Mazda Familia 1.3 S added 1996-12-11. Last modified 2013-02-28. |
|||