The Humber Pullman Mk II is a limousine with 4 doors and a front mounted powerplant which transmits the power through the rear wheels.
It is powered by a naturally aspirated engine of 4.1 litre capacity. This powerplant features side valve valve gear, 6 cylinder layout, and 2 valves per cylinder. It produces 100 bhp (101 PS/75 kW) of power at 3400 rpm.
This power is transferred to the wheels by means of a 4 speed manual gearbox.
It weighs a claimed 2096 kg at the kerb.
Full specs
|
|
|||
| Carrocería | |||
|---|---|---|---|
| Carrocería | 7/8 seater limousine | ||
| Número de puertas | 4 | ||
| diseñado por | |||
| Dimensiones y pesos | |||
| Distancia entre ejes | 3327 | 131 | |
| Vía delantera | 1470 | 57.9 | |
| Vía trasera | 1581 | 62.2 | |
| Longitud | 5347 | 210.5 | |
| Ancho | 1892 | 74.5 | |
| Altura | 1753 | 69 | |
| Despeje del suelo | 191 | 7.5 | |
| Relación Largo:Dist.entre ejes | 1.61 | ||
| Peso en vacío | 2096 kg | 4621 | |
| Distribución del peso (% adelante) | |||
| Capacità serbatoio | 68 litres | 15 [18] UK [US] gal. | |
| Aerodinámica | |||
| Coeficiente de penetración | |||
| Superficie frontal | |||
| SCx | |||
| Tren motriz | |||
| naturally aspirated petrol | |||
| Fabricante del motor | Humber | ||
| Código de motor | |||
| Número de cilindros | Straight 6 | ||
| Cilindrada | 4.1 litre 4086 cc (249.343 cu in) |
||
| Diámetro × Carrera | 85 × 120 mm
3.35 × 4.72 in |
||
| Relación diámetro/carrera | 0.71 | ||
| Distribución | side valve (SV)
2 válvulas por cilindro 12 Total de válvulas |
||
| Potencia nominal | 101 PS (100 bhp) (75 kW) a 3400 rpm |
||
| Par motor máximo | |||
| Potencia específica | 18.3 kW/litre 24.8 ps/litre 24.5 bhp/litre 0.4 bhp/cu in |
||
| Materiales de block / culata | |||
| Lubricación | |||
| Relación de compresión | 6.25:1 | ||
| Alimentación | 1 St carb | ||
| Maximum RPM | |||
| Casquillos de cigüeñal | 4 | ||
| Engine coolant | Water | ||
| 681 cc | |||
| Aspiración | Normal | ||
| Compresor | N/A | ||
| intercooler | None | ||
| catalizador | N | ||
| Rendimiento | |||
| 0-80km/h | |||
| 0-60mph | |||
| 0-100km/h | |||
| 0-160km/h | |||
| 0-400m | |||
| 0-1000m | |||
| Velocidad máxima | |||
| Power-to-weight ratio | Higher is better 48.37 PS/tonne (1000 kg) 0.05 PS/kg 35.58 kW/tonne (1000 kg) 0.04 kW/kg 47.71 bhp/tonne (1000 kg) 0.05 bhp/kg 0.02 bhp/lb |
||
| Weight-to-power ratio | Lower is better 28.11 kg/kW 46.95 lb/bhp |
||
| Consumos | |||
| Consumo de combustible | |||
| universal fuel consumption (calculated from the above) | |||
| litres/100km | |||
| km/litre | |||
| UK MPG | |||
| US MPG | |||
| Emisiones de CO2 | |||
| Carfolio Calculated CO2 ? | |||
| VED band (UK) | |||
| CO2 Effizienz (DE) | |||
| Chasis | |||
| Ubicación del motor | front | ||
| Engine layout | longitudinal | ||
| Tracción | rear wheel drive | ||
| Alimentación | N/A | ||
| Dirección, tipo | |||
| turns lock-to-lock | |||
| Turning circle | 14.60 m | ||
| Suspensión delantera | I.TL. | ||
| Suspensión trasera | LA.SE. | ||
| Ruedas delante | |||
| Ruedas detrás | |||
| Neumáticos delante | 7.00 x 16 | ||
| Neumáticos detrás | 7.00 x 16 | ||
| Brakes F/R | Dr/Dr | ||
| Front brake diameter | |||
| Rear brake diameter | |||
| Braked area | |||
| Transmisión | 4 speed manual | ||
| Eje trasero desmultiplicación | 1 | ||
| Desmultiplicación grupo cónico | 4.10 | ||
| General | |||
| Carfolio.com ID | 57585 | ||
| Unidades producidas | |||
| Model code | |||
| RAC rating | 26.9 | ||
| Insurance classification | No information available | ||
| Tax band | No information available | ||
|
1948 Humber Pullman Mk II added before December 1995. Last modified 2013-02-28. |
|||