The Holden Ute SS V-Series is a 2 door light delivery vehicle/ute/bakkie style automobile with a front mounted engine powering the rear wheels.
The Holden Ute SS V-Series belongs to the VF II range of cars from Holden.
Power is supplied by an overhead valve, 6.2 litre naturally aspirated 8 cylinder engine, with 2 valves per cylinder that develops power and torque figures of 408 bhp (414 PS/304 kW) at 6000 rpm and 570 N·m (420 lb·ft/58.1 kgm) at 4400 rpm respectively.
A 6 speed manual transmission supplies the power to the wheels.
Its quoted weight at the kerb is 1744 kg.
Full specs
|
|
|||
| Carrosserie | |||
|---|---|---|---|
| Carrosserie | 2 seater light delivery vehicle/ute/bakkie | ||
| Aantal portieren | 2 | ||
| Ontwerper | |||
| Afmetingen en gewicht | |||
| Wielbasis | 3009 | 118.5 | |
| Spoorbreedte voor | 1593 | 62.7 | |
| Spoorbreedte achter | 1606 | 63.2 | |
| Lengte | 5081 | 200 | |
| Breedte | 1898 | 74.7 | |
| Hoogte | 1494 | 58.8 | |
| Bodemvrijheid | |||
| 1.69 | |||
| Gewicht | 1744 kg | 3845 | |
| Gewichtsverdeling | |||
| Benzinetank inhalt | 71 litres | 15.6 [18.8] UK [US] gal. | |
| Aërodynamica | |||
| Cw-waarde | |||
| Frontaal oppervlak | |||
| CdA | |||
| naturally aspirated petrol | |||
| Motor fabrikant | GM | ||
| Motor nummer | LS3 | ||
| Aantal cilinders | V 8 in 90° vee | ||
| Cilinderinhoud | 6.2 litre 6162 cc (376.028 cu in) |
||
| Boring × Slag | 103.25 × 92 mm
4.06 × 3.62 in |
||
| Boring/slag verhouding | 1.12 | ||
| Distributie | overhead valve (OHV)
2 Kleppen per cilinder 16 Totaal aantal kleppen |
||
| Vermogen (ECE) |
414 PS (408 bhp) (304 kW) bij 6000 t/min |
||
| Max. koppel (ECE) |
570 Nm (420 ft·lb) (58.1 kgm) bij 4400 t/min |
||
| Specific output (ECE) |
49.4 kW/litre 67.1 ps/litre 66.2 bhp/litre 1.09 bhp/cu in |
||
(ECE) |
92.5 Nm/litre
1.12 ft·lb/cu3 |
||
| Motor constructie | |||
| Smering | Nat carter | ||
| Compressieverhouding | 10.7:1 | ||
| Brandstofsysteem | EFI | ||
| 1162.4 kPa (168.6 psi) | |||
| Maximum tpm | |||
| Aantal nokkenas lagers | 5 | ||
| Afkoeling | Water | ||
| Eenheidscylinderinhoud | 770.25 cc | ||
| Aanzuiging | Normal | ||
| Compressor | N/A | ||
| Intercooler | None | ||
| Katalysator | Y | ||
| Prestasies | |||
| 0-80km/h | |||
| 0-60mph | |||
| 0-100km/h | |||
| 0-160km/h | |||
| 0-400m | |||
| 0-1000m | |||
| Max. snelheid | |||
| Power-to-weight ratio | Higher is better 237.2 PS/tonne (1000 kg) 0.24 PS/kg 174.45 kW/tonne (1000 kg) 0.17 kW/kg 233.94 bhp/tonne (1000 kg) 0.23 bhp/kg 0.1 bhp/lb |
||
| Weight-to-power ratio | Lower is better 5.73 kg/kW 9.57 lb/bhp |
||
| Verbruik | |||
| Benzineverbruik | |||
| universal fuel consumption (calculated from the above) | |||
| litres/100km | |||
| km/litre | |||
| UK MPG | |||
| US MPG | |||
| CO2 Emissies | 298.0 g/km NEDC | ||
| Carfolio Calculated CO2 ? | |||
| VED band (UK) | M | ||
| CO2 Effizienz (DE) | G | ||
| Onderstel | |||
| Motor plaatsing | front | ||
| Motor plaatsing | longitudinal | ||
| Aandrijving | rear wheel drive | ||
| Koppelverdeling | N/A | ||
| Stuurinrichting | |||
| Aantal omwentelingen stuurwiel | |||
| Draaicirkel | |||
| Wielophanging voor | |||
| Wielophanging achter | |||
| Velgmaat voor | 8½ x 19 | ||
| Velgmaat achter | 9 x 19 | ||
| Bandenmaat voor | 245/40 R 19 | ||
| Bandenmaat agter | 275/35 R 19 | ||
| Bremmen voor/agter | VeDi/VeDi-S-ABS | ||
| Rem diameter voor | 321 mm | ||
| Rem diameter agter | 324 mm | ||
| Braked area | |||
| Versnellingsbak | 6 speed manual | ||
| Hoogste versnelling verhouding | 0.57 | ||
| Achteras verhouding | 3.70 | ||
| Algemeen | |||
| Carfolio.com ID | 567490 | ||
| Totaal gebouwd | |||
| Bouwserie | |||
| Model familie | VF II | ||
| RAC rating | 52.9 | ||
| Insurance classification | No information available | ||
| Tax band | No information available | ||
|
2016 Holden Ute SS V-Series added 2018-11-17. Last modified 2020-03-16. |
|||
