Holden Commodore Wagon Berlina is a car that has a 5 door estate/station wagon type body with a front positioned engine delivering its power to the rear wheels.
It is part of Holden's VK family of cars.
It is powered by a naturally aspirated engine of 3.3 litre capacity. This powerplant features overhead valve valve gear, 6 cylinder layout, and 2 valves per cylinder. It has an output of 115 bhp (117 PS/86 kW) of power at 4200 rpm, and maximum torque of 232 N·m (171 lb·ft/23.7 kgm) at 2600 rpm.
A 3 speed automatic 'box delivers the power to the wheels.
It weighs a claimed 1303 kg at the kerb.
Full specs
|
|
|||
| Carrocería | |||
|---|---|---|---|
| Carrocería | 4/5 seater estate/station wagon | ||
| Número de puertas | 5 | ||
| diseñado por | |||
| Dimensiones y pesos | |||
| Distancia entre ejes | 2668 | 105 | |
| Vía delantera | 1451 | 57.1 | |
| Vía trasera | 1440 | 56.7 | |
| Longitud | 4717 | 185.7 | |
| Ancho | 1722 | 67.8 | |
| Altura | |||
| Despeje del suelo | 141 | 5.6 | |
| Relación Largo:Dist.entre ejes | 1.77 | ||
| Peso en vacío | 1303 kg | 2873 | |
| Distribución del peso (% adelante) | |||
| Capacità serbatoio | 68 litres | 15 [18] UK [US] gal. | |
| Aerodinámica | |||
| Coeficiente de penetración | |||
| Superficie frontal | |||
| SCx | |||
| Tren motriz | |||
| naturally aspirated petrol | |||
| Fabricante del motor | Holden | ||
| Código de motor | |||
| Número de cilindros | Straight 6 | ||
| Cilindrada | 3.3 litre 3298 cc (201.256 cu in) |
||
| Diámetro × Carrera | 92.1 × 82.5 mm
3.63 × 3.25 in |
||
| Relación diámetro/carrera | 1.12 | ||
| Distribución | overhead valve (OHV)
2 válvulas por cilindro 12 Total de válvulas |
||
| Potencia nominal (DIN) |
117 PS (115 bhp) (86 kW) a 4200 rpm |
||
| Par motor máximo (DIN) |
232 Nm (171 ft·lb) (23.7 kgm) a 2600 rpm |
||
| Potencia específica (DIN) |
26 kW/litre 35.4 ps/litre 34.9 bhp/litre 0.57 bhp/cu in |
||
(DIN) |
70.35 Nm/litre
0.85 ft·lb/cu3 |
||
| Materiales de block / culata | |||
| Lubricación | Cárter húmedo | ||
| Relación de compresión | 8.8:1 | ||
| Alimentación | 1 Varajet II carburettor | ||
| 884 kPa (128.2 psi) | |||
| Maximum RPM | |||
| Casquillos de cigüeñal | |||
| Engine coolant | Water | ||
| 549.67 cc | |||
| Aspiración | Normal | ||
| Compresor | N/A | ||
| intercooler | None | ||
| catalizador | N | ||
| Rendimiento | |||
| 0-80km/h | |||
| 0-60mph | |||
| 0-100km/h | |||
| 0-160km/h | |||
| 0-400m | |||
| 0-1000m | |||
| Velocidad máxima | |||
| Power-to-weight ratio | Higher is better 89.48 PS/tonne (1000 kg) 0.09 PS/kg 65.81 kW/tonne (1000 kg) 0.07 kW/kg 88.26 bhp/tonne (1000 kg) 0.09 bhp/kg 0.04 bhp/lb |
||
| Weight-to-power ratio | Lower is better 15.19 kg/kW 25.38 lb/bhp |
||
| Consumos | |||
| Consumo de combustible | |||
| universal fuel consumption (calculated from the above) | |||
| litres/100km | |||
| km/litre | |||
| UK MPG | |||
| US MPG | |||
| Emisiones de CO2 | |||
| Carfolio Calculated CO2 ? | |||
| VED band (UK) | |||
| CO2 Effizienz (DE) | |||
| Chasis | |||
| Ubicación del motor | front | ||
| Engine layout | longitudinal | ||
| Tracción | rear wheel drive | ||
| Alimentación | N/A | ||
| Dirección, tipo | |||
| turns lock-to-lock | |||
| Turning circle | |||
| Suspensión delantera | |||
| Suspensión trasera | |||
| Ruedas delante | 6.0JJ x 14 | ||
| Ruedas detrás | 6.0JJ x 14 | ||
| Neumáticos delante | CR 78 S 14 4 ply | ||
| Neumáticos detrás | CR 78 S 14 4 ply | ||
| Brakes F/R | Di/Dr-S | ||
| Front brake diameter | |||
| Rear brake diameter | |||
| Braked area | |||
| Transmisión | 3 speed automatic | ||
| Eje trasero desmultiplicación | 1 | ||
| Desmultiplicación grupo cónico | 3.23 | ||
| General | |||
| Carfolio.com ID | 251251 | ||
| Unidades producidas | |||
| Model code | |||
| VK | |||
| RAC rating | 31.6 | ||
| Insurance classification | No information available | ||
| Tax band | No information available | ||
|
1985 Holden Commodore Wagon Berlina added 2011-08-06. Last modified 2020-02-02. |
|||
