This car has a 2 door coupé body style with a front positioned engine powering the front wheels.
Power is produced by an overhead valve, 3.8 litre naturally aspirated 6 cylinder motor, with 2 valves per cylinder that produces power and torque figures of 200 bhp (203 PS/149 kW) at 5200 rpm and 305 N·m (225 lb·ft/31.1 kgm) at 4000 rpm respectively.
The engine delivers its power through to the wheels via a 4 speed automatic 'box.
The quoted kerb weight is 1538 kg.
Full specs
|
|
Applicable to the USA domestic market(s). | ||
| bodywork | |||
|---|---|---|---|
| Body type | 4/5 seater fixed-head coupé | ||
| Number of doors | 2 | ||
| Designer | |||
| dimensions & weights | |||
| Wheelbase | 2807 mm | 110.5 inches | |
| Track/tread (front) | 1576 mm | 62 inches | |
| Track/tread (rear) | 1554 mm | 61.2 inches | |
| Length | 5026 mm | 197.9 inches | |
| Width | 1836 mm | 72.3 inches | |
| Height | 1403 mm | 55.2 inches | |
| Ground clearance | |||
| length:wheelbase ratio | 1.79 | ||
| Kerb weight | 1538 kg | 3391 lb | |
| Weight distribution | |||
| fuel tank capacity | 64.4 litres | 14.2 [17] UK [US] gal. | |
| aerodynamics | |||
| Drag coefficient | |||
| Frontal area | |||
| CdA | |||
| Powertrain | |||
| engine type | naturally aspirated petrol | ||
| Engine manufacturer | GM | ||
| Engine code | L36 | ||
| Cylinders | V 6 in 90° vee | ||
| Capacity | 3.8 litre 3791 cc (231.341 cu in) |
||
| Bore × Stroke | 96.5 × 86.4 mm
3.8 × 3.4 in |
||
| Bore/stroke ratio | 1.12 | ||
| Valve gear | overhead valve (OHV)
2 valves per cylinder 12 valves in total |
||
| maximum power output (SAE net) |
203 PS (200 bhp) (149 kW) at 5200 rpm |
||
| maximum torque (SAE net) |
305 Nm (225 ft·lb) (31.1 kgm) at 4000 rpm |
||
| Specific output (SAE net) |
39.3 kW/litre 53.5 ps/litre 52.8 bhp/litre 0.86 bhp/cu in |
||
| Specific torque (SAE net) |
80.45 Nm/litre
0.97 ft·lb/cu3 |
||
| Engine construction | cast iron block & head | ||
| Lubrication | wet sumped | ||
| compression ratio | 9.4:1 | ||
| Fuel system | SFi | ||
| bmep (brake mean effective pressure) | 1011 kPa (146.6 psi) | ||
| Maximum RPM | |||
| crankshaft bearings | |||
| Engine coolant | Water | ||
| Unitary capacity | 631.83 cc | ||
| Aspiration | Normal | ||
| Compressor | N/A | ||
| Intercooler | None | ||
| Catalytic converter | Y | ||
| performance | |||
| Acceleration 0-80km/h (50mph) | |||
| Acceleration 0-60mph | |||
| Acceleration 0-100km/h | |||
| Acceleration 0-160km/h (100mph) | |||
| Standing quarter-mile | |||
| Standing kilometre | |||
| Maximum speed | |||
| Power-to-weight ratio | Higher is better 131.85 PS/tonne (1000 kg) 0.13 PS/kg 96.97 kW/tonne (1000 kg) 0.1 kW/kg 130.04 bhp/tonne (1000 kg) 0.13 bhp/kg 0.06 bhp/lb |
||
| Weight-to-power ratio | Lower is better 10.31 kg/kW 17.23 lb/bhp |
||
| fuel consumption | |||
| Fuel consumption | |||
| universal fuel consumption (calculated from the above) | |||
| litres/100km | |||
| km/litre | |||
| UK MPG | |||
| US MPG | |||
| Carbon dioxide emissions | |||
| Carfolio Calculated CO2 ? | |||
| VED band (UK) | |||
| CO2 Effizienz (DE) | |||
| chassis | |||
| Engine position | front | ||
| Engine layout | transverse | ||
| Drive wheels | front wheel drive | ||
| Torque split | N/A | ||
| Steering | power assisted rack & pinion | ||
| turns lock-to-lock | 2.260 | ||
| Turning circle | |||
| Front suspension | |||
| Rear suspension | |||
| Wheel size front | |||
| Wheel size rear | |||
| Tyres front | P225/60 R 16 | ||
| Tyres rear | P225/60 R 16 | ||
| Brakes F/R | VeDi/Di-S-ABS | ||
| Front brake diameter | 303 mm | ||
| Rear brake diameter | 278 mm | ||
| Braked area | 2200 cm2 | ||
| Gearbox | 4 speed automatic | ||
| Top gear ratio | 0.71 | ||
| Final drive ratio | 3.29 | ||
| general | |||
| Carfolio.com ID | 80322 | ||
| Production total | |||
| Model code | |||
| RAC rating | 34.6 | ||
| Insurance classification | No information available | ||
| Tax band | No information available | ||
|
2000 Chevrolet Monte Carlo SS added 2001-06-28. Last modified 2013-02-28. |
|||
